* add devcontainer setup and change default port to 3002
* fix(devcontainer): enforce frozen install
---------
Co-authored-by: victor <victor@elalemanyo.de>
* feat: add persistent measurement tools
* feat: make measurements associative
* fix: finish measurements with Escape
* feat: improve measurement snapping guides
* feat: clarify measurement axis feedback
* feat: smart measure lens, zone reports, and direct measurement editing
- Smart measurement lens: registry-owned wall/slab/zone hover reports with a
single top-center HUD, click-to-pin, latest-event back pressure, and no
scene writes
- Conservative derived zone quantities (footprint, perimeter, proven
enclosure, gross wall/floor surface, flat-room volume) with the
selected-zone blueprint panel
- Direct editing of committed measurements via selected-only 2D/3D vertex
affordances with midpoint insertion, cancellation, and one-write history
- Shared measurement surface-query session; 2D tracing joins the
slab/ceiling magnetic pipeline with registered-corner snapping
- Angle arcs on the smaller angle, indigo active/black resting hierarchy,
screen-sized normal-aligned contact rings
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix: make measurement snapping always magnetic
Measurement drafting and committed-edit paths gated wall, semantic, and
axis magnetism on isMagneticSnapActive(), which is only true in the
'lines' snapping mode — in the default 'grid' mode corners and wall
intersections barely attracted (3D association fell to the 0.012 m
verify tolerance, 2D wall radii to the 0.05 m connect stick).
Measurement is an analysis tool whose anchors exist to bind real
geometry, so its snapping no longer consults the construction
snapping-mode chip: 2D/3D drafting and committed vertex edits are always
magnetic, Alt is the temporary bypass in both views (releasing the axis
pull, wall magnetism, and the 2D projected-geometry pull, and shrinking
association to contact tolerance). A discrete 2D wall snap (endpoint /
midpoint / crossing) now outranks the locked axis pull, and committed 2D
edits route the fallback through the raw pointer so free drags no longer
quantize to the construction grid. Volume extrusion height keeps its
mode-driven grid quantize.
Codex adversarial review confirmed the diagnosis and plumbing; its 2D
Alt-depth and grid-quantize findings are applied. New
surface-plan-snap tests pin the magnetic override seam.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(measurement): stabilize area surface intent
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
When the 2D panel is hidden, align-north publishes a single '2d' pose that
the camera applies through the echo-suppressed pending-pose path, so no
'3d' poses ever reach the compass subscription and the needle stayed
frozen. Drive the needle with a local rAF exponential decay (same 90ms
time constant as the 2D view animation and the camera's effective
smoothTime); a live '3d' pose cancels it and takes back ownership.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
While editing a numeric field, the unit suffix now visually responds to
the draft content:
- Plain number / empty: suffix dims to 40% opacity (signals "default unit
if you commit a bare number")
- Explicit unit typed (hint showing): suffix fades to opacity-0 over
150ms (the conversion hint provides unit feedback instead)
- Unparseable text: suffix stays dimmed (field will revert on commit)
- At rest: unchanged full-opacity suffix
Uses opacity-0 rather than unmounting so the flex layout doesn't jump.
The predicate is simply `hint !== null` — it aligns exactly with
measurementHint's internal PLAIN_NUMBER guard.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Route all pending-pose cancellations through clearPendingFloorplanNavigationPose()
so savedSmoothTime is always restored. Add a controlstart listener to catch
right-click orbit and other pointer drags that weren't handled. Guard the
rotation-degree ref mirror to prevent React re-renders from clobbering the
imperative 3D-owned value when the panel is hidden, and add a useLayoutEffect
to keep the needle DOM in sync. Make the catch-up effect re-run directly on
panel reopen.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Remove CSS transition on compass needle SVG so rotation tracks
exactly without rubber-band lag (was transition-transform 150ms)
- Drive compass needle imperatively via ref when floorplan panel is
hidden (3D-only mode), avoiding per-frame React re-renders of the
full SVG while keeping the needle live
- Align-to-north in 3D-only mode derives from latestNavigationSyncPose
instead of stale viewport, publishes directly to the 3D camera
- Temporarily lower camera-controls smoothTime from 0.25s to 0.18s
during 2D-origin transitions (SmoothDamp τ≈90ms matches the 2D
exponential decay), restoring on completion or cancellation
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Lets a host mount the editor's real editing experience on a bare <Viewer>
without the full <Editor> shell.
editor: export Grid, NodeArrowHandles, MoveTool, ToolManager — the selection
handles, the kind-owned mover, the build-tool host, and the drafting grid that
feeds tools their grid:* pointer events. See the doc comment in index.tsx for
how they cooperate with host camera controls and selection.
viewer: two opt-in, non-persisted presentation flags (both default off, so the
editor and every other consumer are unchanged):
- transparentBackground / <Viewer transparent>: emit premultiplied RGBA masked
by geometry + outline alpha (outputColorTransform off on that path) so the
scene can float on any page background. ACES tone-mapping makes a true-white
opaque background impossible, hence transparency.
- inkOpacity: override the per-mode ink-edge opacity.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(editor): preserve grab offset when moving items (no teleport-to-cursor)
Grabbing a placed item to move it (move-cross handle or the Move
affordance) snapped the item's origin to the cursor instead of keeping
the offset between the grab point and the origin.
- Floor (regression): the grab-offset rewrite patched event.localPosition,
but floorStrategy.move reads event.position (the world cursor) for its
world-grid snap on the default non-Shift path -- a read added after the
offset fix landed. Now also correct event.position, derived from the
corrected building-local point via buildingLocalToWorld.
- Wall / ceiling / item-surface / shelf: the shared surface strategies
snapped the origin straight to the cursor with no grab offset. Added
per-surface grab anchors (start + (raw - anchor)) seeded on the first
move per host and reset on leave/detach; host-resting items start in
their surface, and the level-reparent effect skips intentionally-hosted
drafts so the dragged mesh stays on its host.
Rename preserveFloorDragOffset -> preserveDragOffset (it now governs all
surfaces). 2D move paths already preserved the grab offset, so no sibling
change is needed -- this brings 3D into parity.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* refactor(editor): tidy grab-offset floor/wall paths (quality pass)
Behaviour-preserving readability pass before shipping:
- Extract the floor grab-offset IIFE into a named `applyFloorGrabOffset`
helper (parity with `resolveHostSurfaceWorld`); drop redundant tuple
casts via the return annotation and tighten the comment.
- Wall move: always set `position` (raw hit when the wall mesh is absent)
instead of a conditional object spread.
A reviewed dedup of the three per-surface anchors was deliberately NOT
taken — the wall (X/Y) / ceiling (X/Z) / host-surface frames are
heterogeneous enough that unifying them adds more indirection than it
removes.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Round 8 of the opening-placement UX work. Make door/window placement feel
physical and predictable, and unify the validity/placement logic behind one
shared decision.
UX:
- Window default sill 0.5 m (DEFAULT_WINDOW_SILL_M) so fresh windows float
slightly above the floor; existing windows keep their own sill.
- Dev-only floor "shadow" projection for windows during placement/move
(footprint + dashed drop-line) so an elevated window's plan spot is legible.
- Move SFX: one soft grid-snap click per grid step — identical free-following
over floor or sliding on a wall (keyed on the raw cursor; per-frame + step
dedup), no separate snap cue (that was a "double"). Mirrored into the 2D
floorplan-move so 2D and 3D match.
- Shift = force-place over a collision (commit allowed; ghost stays a red
warning) + free-place (lands at the raw cursor but keeps the alignment guides
visible). Tint flips green/red live when Shift is pressed/released stationary.
- On-wall preview is now the tinted ghost (green placeable / red colliding),
matching the free-follow ghost, instead of a pale solid mesh + thin wireframe.
- R-flip fixes: always toggles (no initial no-op needing a second press),
e.repeat filtered, ghost rebuilds with the live `side`, and the ghost's
on-wall world yaw uses `itemRotation - wallAngle` so it faces exactly what
commit places (cursorRotation was π off for the asymmetric ghost). R ownership
follows the current pointer pane (capture-phase + stopImmediatePropagation in
the 2D overlay) so 3D and 2D never double-flip or go dead.
Refactor / quality:
- New `resolveOpeningPlacement({collides,forcePlace}) -> {placeable,tint}` in
shared/wall-attach-target.ts — the single source of truth the ghost tint AND
the commit gates both consume, so they can't disagree under Shift.
- Consolidated the byte-identical `hasWallChildOverlap` into one shared impl
(door-math/window-math re-export it).
- applyGhost gained a green "valid" tint.
- Removed dead `cursorRotation` from the move-tool targets after the yaw fix.
Docs: "2D <-> 3D behavioral parity" principle in wiki/architecture/tools.md
(+ README + AGENTS.md) — applicable behaviors must exist in both views.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
#407 ("Always-visible placement ghosts + true-nearest 2D opening snap")
restructured the door/window placement tools: it split the old
create-in-resolve into a pure resolveWallPlacement() + side-effecting
applyWallTarget(), added an off-host floating ghost (fallbackPose / showGhostAt),
unified wall hover into onWallHover, and extracted commit{Door,Window}AtWall.
Conflict resolution (door/tool.tsx, window/tool.tsx):
- Re-homed the single publishOpeningGuidesForWallEvent() call into applyWallTarget
(after the draft update + updateCursor), using that scope (wall,
getSlabElevationForWall(wall)); door includeVertical:false, window true.
- Routed clearOpeningGuides3D() through showGhostAt so every off-host fallback
path clears; kept clears in hideCursor, commit helpers, onRoofHover, teardown.
- Made the window sill snap (resolvePlacementY) event-free and call it from the
pure resolveWallPlacement, so hover + click both get sill/centre/top snapping;
Shift bypasses, the moving draft is excluded via ignoreId.
- Dropped the branch's inline onWallClick in favour of #407's onWallClick +
commitWindowAtWall (no behavior lost).
- Reconstructed both files' import blocks, which the auto-merge had truncated to
stubs (only tsc caught it).
All other conflicts auto-merged (registry types, floorplan-registry-layer,
both move-tools). Verified: typecheck 9/9, biome clean, nodes 169 + core 594
tests pass, editor `bun run build` 7/7. Merge resolution reviewed by Codex
(adversarial): no semantic regressions; all #407 behavior preserved.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reuse one THREE.Line + preallocated position buffer per guide slot, mutating
endpoints in place each drag tick instead of rebuilding the geometry, line, and
two Vector3s and re-uploading the GPU buffer every frame. Key guides by a stable
semantic id (sill / head / gap:side / vertical / spacing:i) so a slot that
persists keeps its React element and drei <Html> pill mounted as the guide set
churns, rather than remounting under shifting index keys.
Also: make useOpeningGuides.clear() a no-op when already empty so the common
no-guide hover frame doesn't push a fresh [] and re-render to the same nothing;
dispose the move-tool cursor EdgesGeometry on unmount; and memoize the
placement-tool cursor EdgesGeometry (static fallback dims) so it isn't
reallocated and orphaned on every render during placement.
Reviewed by Codex (peer + adversarial): no correctness, hook-order, or GPU-leak
regressions.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(editor): always-visible translucent placement ghost for openings + roof accessories
When a host-surface placement tool is armed, the node's real geometry now
follows the cursor everywhere as a translucent ghost: tinted invalid (red)
and unconfirmable off-host, snapping onto its host surface (wall/roof) with
the existing valid/invalid affordances when near. This replaces the old red
wireframe box (door/window) and red DragBoundingBox (roof accessories), so
the armed tool is visible before the cursor reaches a placeable surface.
- New shared `applyGhost` helper (nodes/src/shared/ghost-materials.ts):
clones materials, disables raycast (avoids cursor-ray starvation),
tints invalid; cleanup disposes only the clones.
- New door/window preview components built from the real geometry via new
`buildDoorPreviewMesh`/`buildWindowPreviewMesh` viewer exports; tools float
the ghost via a `fallbackPose` that is mutually exclusive with the on-host
draft + wireframe outline.
- `RoofAttachmentFallbackPreview` gains a `ghost` prop; all 11 roof-accessory
tools pass their real preview (invalid-tinted) instead of a box `size`.
Snapping behavior is unchanged (no proximity snap yet).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(editor): magnetic proximity wall-snap for door/window placement
The door/window ghost now follows the cursor over the floor like a moving
item and magnetically snaps onto the nearest wall within range (1.5 m), then
releases back to free-follow when the cursor moves away — instead of only
attaching on a direct wall-mesh ray hit. A grid-snap sound plays each time it
snaps onto a new spot, so it reads as moving a physical object that can only
land on walls.
- Plan-space proximity via the existing `findClosestWallInPlan` (the same
helper the 2D floor-plan move uses): level-scoped, skips curved walls,
returns wall + along-wall localX + side + wall-local rotation.
- `grid:move` drives the snap and `grid:click` commits when proximity-snapped;
a direct wall-mesh hover (wall:enter/move) still owns the precise face side.
Both paths share `applyWallTarget` (create the draft once, reparent only on
an actual wall change) and a shared commit that refreshes alignment anchors.
- Disambiguation without a stuck flag: a per-pointermove `timeStamp` gate
(R3F + the grid raycast share the source DOM event) plus a `cameraDragging`
guard and stale-`hostKind` reset, so a missed wall:leave during a camera
orbit can't strand the draft.
- Window keeps its sill height on the floor path (the floor cursor carries no
wall-face Y) — defaults to a ~0.9 m sill, mirroring the 2D move.
- Shift bypasses the along-wall grid/alignment snap but still attaches to the
nearest wall, matching the 3D-hover and 2D-move conventions.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(editor): door/window preset placement follows the cursor over open floor
The community preset/catalog flow places doors and windows through the
isNew move path (MoveDoorTool / MoveWindowTool), which had no free-follow:
the fresh clone was parented to the level at the origin and only became
visible once the cursor reached a wall, so over empty floor nothing tracked
the cursor. Now the move tools mirror the def.tool placement behaviour:
- Off-wall, the real node rides the cursor like an item (reparented to the
level, positioned at the building-local cursor) so it's obvious what's
being placed before it attaches.
- Within range of a wall it magnetically snaps on via findClosestWallInPlan
(the same plan-space helper the 2D move uses), releasing back to free-follow
when the cursor moves away, and plays the grid-snap sound on each new snap.
- grid:click commits only when snapped (open floor is a no-op — a door/window
needs a wall); the wall/roof mesh-hover paths are unchanged and still own
their own click. A per-pointermove timeStamp gate + cameraDragging guard
keep the floor handler from fighting a wall/roof hover.
- Windows default to a ~0.9m sill while off-wall (fresh preset clones carry
position [0,0,0], which buried half the window below the floor).
The wall/roof commit body is extracted into a shared commitToWall so the
mesh-click and proximity-click paths stay identical. Existing-node moves are
fully restored on cancel/unmount (the node stays isTransient through
free-follow). Standalone-editor def.tool placement already had this in a
prior commit; this brings the community move path to parity.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(editor): 2D floorplan ghost follows the cursor for door/window placement
Mirrors the 3D free-follow in the top-down floor plan: while placing a door
or window, a loose footprint rectangle now follows the cursor over open floor
so it's obvious what's being placed before it snaps to a wall. The instant the
cursor nears a wall, the existing synthesized wall:enter/move path takes over
and the real on-wall door/window symbol (swing arc, etc.) replaces the ghost.
- The opening-placement pointer-move handler in floorplan-panel sets a new
`openingGhostPoint` on the off-wall (findClosestWallPoint miss) branch and
clears it on a wall hit; a loose width × 0.1m rectangle renders at that point
inside the floor-plan scene group (same world→SVG transform as every glyph).
- Width comes from the moving node or the kind default (door 0.9 / window 1.5).
- The ghost clears when opening placement ends (tool/mode change, cancel,
commit) and on level change, so no stale rectangle lingers.
Deliberately a plain rectangle, not the full swing-arc symbol: off-wall there's
no host to orient the swing to. The shared door/window def.floorplan builders
are untouched — overloading them with a wall-less fallback would make
roof-hosted doors (parent is a roof segment, builder returns null today) draw
stray rectangles in plan. Keeping the preview in the editor layer avoids that.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(editor): faithful 2D door/window ghost, 2D wall-slide, R-flip during placement; 3D snap only on hover
Three placement fixes plus a snapping revision, for both the standalone
def.tool path and the community isNew move path (door + window):
- 2D faithful ghost: the off-wall placement ghost now renders the real
blueprint symbol (door swing arc / window panes) following the cursor, not a
bare rectangle. Done by publishing a transient opening on a synthetic wall to
usePlacementPreview (extended with a `parentNode` fed as the builder's
ctx.parent) so the real def.floorplan builder draws it. Cleared on wall-hit,
on commit, on placement-inactive, and on level change.
- 2D slide-along-wall: the floor-plan registry layer ignored useLiveTransforms
for door/window (only floor-placed + slab/ceiling/zone), so a same-wall slide
updated the 3D mesh but left the 2D symbol frozen. It now merges the
wall-local live position/rotation onto the node (keeping parentId) so the 2D
symbol slides with the cursor.
- R-flip during placement: pressing R now flips a door/window's facing
(front ↔ back, rotation += π) before commit — the placement tools own R while
placing (the global selection-based R/T handler stands down via
isPlacingOpening so it can't double-fire). No-op on roof faces (front-only).
- 3D snapping zero-padding: removed the 1.5 m proximity magnet; in 3D the
opening free-follows the cursor over open floor and snaps only when the cursor
ray actually hovers a wall/roof mesh (big raycast targets). 2D keeps its
0.5 m findClosestWallPoint padding since plan walls are thin.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(editor): make FloorplanRegistryMoveOverlay the sole 2D owner of door/window placement
Community door/window placement (movingNode + metadata.isNew) had TWO 2D paths
running at once: the floorplan-panel synthesized wall:*/grid:* events (driving
the 3D MoveDoorTool) AND FloorplanRegistryMoveOverlay via def.floorplanMoveTarget.
They fought — R didn't flip the 2D symbol and clicks didn't commit in 2D, while
3D worked. The overlay + floorplanMoveTarget is the purpose-built 2D owner
(faithful def.floorplan symbol, plan-space CTM coords, Figma snap, single-undo
commit), so it now owns 2D opening placement when movingNode is set:
- floorplan-panel: the opening pointer-move branch + the registry grid catch-all
+ the background-click catch-all all now exclude the door/window MOVE case
(`!isOpeningMoveActive`), so the synthesized events no longer fire for it (they
still drive pure raw-build placement, which has no movingNode). Without the
catch-all exclusions the move case fell through to grid:move/grid:click, which
re-drove the 3D tool's free-follow and consumed the commit click.
- R-flip in 2D: `FloorplanMoveTargetSession` gains optional `flipSide()`;
door/window floorplan-move implement it (XOR the wall-derived side + π rotation,
re-running the last apply). The overlay's keydown calls `session.flipSide()` on
R — gated on `hasMovedSinceStart` so it only fires when the 2D pane is the
active mover (the 3D MoveDoorTool owns R in 3D/split; this prevents a double
flip / double cue on one R press).
- Commit in 2D now flows solely through the overlay's pointerup (no competing
synthesized wall:click), so click-to-place commits.
The global use-keyboard R/T already stands down during opening placement
(isPlacingOpening), so a selected node can't also flip.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(editor): 2D door/window move free-follows the cursor off-wall and commits only on a wall
Moving an existing door/window in the 2D floor plan: the move target's `apply`
early-returned off-wall (`if (!hit) return`), so the opening stayed frozen on
its old wall instead of following the cursor between walls (3D free-follows),
and an off-wall confirm click committed the stale last-wall position — looking
like the placement failed.
Now `doorFloorplanMoveTarget`/`windowFloorplanMoveTarget` mirror the 3D move:
- Off-wall, `apply` free-follows the cursor — hides the real node and floats the
faithful door/window symbol at the cursor via a synthetic wall published to
`usePlacementPreview` (the same preview layer fresh placement uses). The real
node is `visible:false` so the registry layer skips it (no double symbol).
- Back on a wall, it clears the ghost, reveals the real node, and snaps as before.
- `canCommit` returns false while off-wall, so an open-floor click reverts to the
pre-move snapshot (door returns to its wall) instead of committing in mid-air —
matching the 3D move, where clicking open floor commits nothing. On a wall the
commit lands normally.
The overlay's snapshot revert (cancel / invalid commit) and the on-wall `apply`'s
`visible:true` restore both guarantee the node is never left hidden after a move.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(editor): 2D opening snap picks the true nearest wall, with a tighter radius
The 2D door/window snap felt too aggressive and could grab a wall further away
than the one the cursor was actually nearest. Root cause in
`findClosestWallInPlan`: it compared a candidate's true segment distance against
the previous best's `perpDistance` (signed offset to the wall's infinite line,
not the clamped segment distance). Near a wall end those diverge, so a closer
wall could be rejected / a farther one kept.
- Track the best segment distance and keep the strict minimum — the wall chosen
is now always the single closest segment to the cursor (true nearest), which
resolves correctly when many walls sit close together.
- Tighten the snap radius from 1.5 m to 0.4 m: plan walls are thin, so the old
radius snapped from far away. The opening now free-follows the cursor until
it's genuinely near a wall.
Only the 2D move/placement targets use this helper (3D snaps on raycast hover);
wall-attached items share the same improved nearest-wall behaviour.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(editor): true-nearest 2D opening snap with dev hit-area overlay
Round 7 of the placement-ghosts work. Make the 2D door/window wall snap
always pick the wall nearest the cursor, fix fresh-placement snapping/slide
in 2D, and add a dev-only overlay that visualises each wall's snap region.
- Extract the plan-space nearest-wall-segment math to core
(`lib/wall-distance.ts`: collectLevelWallSegments / closestOnSegment /
nearestWallSegment / WALL_SNAP_DISTANCE_M). `findClosestWallInPlan`
delegates to it, so the snap and the debug overlay share one source of
truth. WallHit contract unchanged.
- door/window 2D move now resolves the host level via the shared
`getOpeningHostLevelId` (wall-hosted, roof-hosted, AND fresh-placement
parented straight to the level — the last case previously resolved to the
building, so a new opening never snapped in 2D).
- Cursor resolver switched to absolute mode: query the snap with the true
cursor, not the original-wall position + grab delta, so it picks the
cursor-nearest wall (matching the 3D move) instead of a far wall across a
thin gap.
- 2D move clears any stale `useLiveTransforms` entry for the node each apply:
the registry layer renders door/window from the live transform in
preference to the scene node, so a leftover entry from the 3D tool froze
the 2D slide for fresh / re-armed openings.
- Fresh window defaults to a 0.9 m sill in 2D (was sitting half-below floor
at y=0), matching the 3D MoveWindowTool.
- New dev-only FloorplanVoronoiLayer + `show2dVoronoi` editor flag: draws
each wall's snap hit area as an analytic capsule (no grid sampling), gated
on a developer-menu toggle.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Extend the opening proximity guides to two more interactions:
- PLACEMENT: the door/window placement tools publish the same 3D guides
(sill/head, edge proximity, sill alignment, equal-spacing) while a NEW
opening is being dropped; window placement also snaps its sill to a
neighbour's sill/centre/top (Shift bypass) — so "two windows aligned" reads
during placement, not just move.
- RESIZE: a new `onDrag` hook on the linear-resize handle descriptor lets the
door/window width/height arrows publish live guides for the edge being
resized — proximity to neighbours as the width grows, and the live sill/head
as a window's height changes. The generic LinearArrow stays kind-agnostic;
only door/window declare the hook.
Refactor (Codex review follow-up): one `publishOpeningGuidesForWallEvent`
wrapper now backs all four wall-event publish sites (door/window move +
placement) over a shared `makeWallToWorld`; window placement's repeated
sill-snap is a single `resolvePlacementY` helper. Opening guides clear on
commit / leave / cancel / roof-hover / unmount (mirroring the alignment-guide
lifecycle) and on resize end.
Codex-reviewed — no blockers; lifecycle/leaks, coordinate frame, sill-snap
precedence, and resize disposal confirmed. Typecheck + biome + 23 core + 170
nodes tests pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Wire the opening-guides service into the 3D door/window move tools and render the
wall-plane guides as the spatial twin of the 2D plan guides:
- sill / head height (floor → bottom edge, top edge → wall top) — windows only
- edge-to-edge proximity dimensions to the nearest neighbour each side
- a sill-alignment line + SNAP when a window shares a neighbour's sill / centre
/ top (competes with the 0.5m grid, Shift bypasses) — the chosen
"snap + guide" behaviour
- Figma-style equal-spacing "=" badges across a run of openings
Adds `useOpeningGuides` (editor store) + `OpeningGuides3DLayer` (raw THREE.Line
overlays + Html pills, mounted beside Alignment3DGuideLayer) and a thin
`opening-guides-runtime` helper (collect siblings / sill snap / publish / clear)
called from the door + window move-tools at their per-tick `applyPreview` hook;
guides clear on commit / cancel / leave / roof-hover / unmount.
Guides render in the move cursor's building-local frame (reuses `wallLocalToWorld`)
so they track the dragged opening exactly. Codex-reviewed (roof-hover stale-guide
clear, collapsed-dimension suppression). Placement-time guides reuse the same
helper and are the next step.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Route the door/window floor-plan placement dimensions through the new
opening-guides service:
- edge-to-edge clearance to the nearest neighbour (or wall end) on each
side, now with overlap suppression (previously nearest-only, ad-hoc).
- Figma-style equal-spacing — a "=" badge per gap on the wall centreline
whenever the moving opening is part of a run of 3+ (near-)equally-spaced
openings.
Adds the `equal-spacing-badge` FloorplanGeometry primitive, its 2D renderer
(distinct pink accent), and overlay registration. Shown while placing/moving.
Sill height + vertical alignment are 3D-only (a top-down plan has no vertical
axis) and land in the next phase.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Pure, Three.js-free wall-local geometry that will power directly-visible
proximity guides for doors and windows (rendered in the follow-up phases):
- sill / head height (floor → bottom edge, top edge → wall top)
- edge-to-edge proximity clearance to the nearest neighbour on each side
(or the wall end), with overlap suppression
- along-wall alignment (edge/centre coincidence with a neighbour)
- vertical alignment (shared sill / centre / top — "same sill height")
- Figma-style equal-spacing run detection across a series of 3+ openings
Single `computeOpeningGuides` entry plus exported detectors; 23 unit tests.
Codex-reviewed — equal-spacing uses a longest-equal-window scan (a greedy
first-gap anchor dropped valid runs), edge gaps suppress straddling overlaps,
and the alignment detectors guard against the moving opening appearing in its
own sibling list.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Doors and windows could only be moved via the floating action menu — their
3D handle rig declared width/height resize arrows but no move grip, and
Ctrl/Meta-drag was a no-op for them. Add a press-drag move cross and make
direct-drag work for every bespoke-mover kind.
- door/window: add a `tap-action` `move-cross` handle (plane node-normal,
portal grandparent, `engageMoveDrag`) mirroring the item wall grip. It
routes through the existing per-kind move tool (3D `affordanceTools.move`,
2D `floorplanMoveTarget`) — wall-bound slide + re-host onto another wall —
so the grip, the floating Move button, and the 2D plan's move dot share one
pipeline. Grab-drag-release commits without a second click.
- canDirectMoveNode: gate Ctrl/Meta-drag on `movable || affordanceTools.move`
(the 3D-mountable move paths) instead of `movable` only, so doors/windows/
walls/slabs/stairs/… are draggable in 3D as they already are in 2D.
Floorplan-only movers (zone) stay excluded — no 3D tool mounts. The
floating helper auto-syncs (it reads canDirectMoveNode).
- TapActionArrow: honor `plane: 'node-normal'` by tilting the move cross
[π/2,0,0] into the wall face — previously ignored, so the item wall grip
rendered flat too. Now door/window/wall-item crosses lie in the wall.
- use-node-events: split the drag-suppression gate. `inputDragging` still
suppresses SELECTION events (the synthesized release-click would re-select),
but no longer suppresses SPATIAL events (enter/move/leave) — a
surface-following move tool runs with `inputDragging` set and needs
wall:move to track the cursor. General consumers that must ignore drags
(viewer hover, box-select) already self-gate on `inputDragging`; the
editor's select-hover and paint-preview enter handlers now gate on it too.
- handle-arrow: make handle hit areas inert while `placementDragMode` is set,
so a move grip riding the dragged node can't intercept the ray and starve
the move tool's surface raycast.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The v0.9.0 GitHub release declared the trio at 0.9.0 but the npm publish
never ran (npm still serves 0.8.0). Aligning manifests so the release
workflow's bump=patch lands everything at the announced-next 0.9.1
(mcp 0.3.0 -> 0.3.1, ifc-converter 0.1.0 -> 0.1.1 keep their own lines,
matching the per-package version table style of previous releases).
Inter-package peer/dev refs move to ^0.9.0 so the workspace stays
self-linked during the release run; the workflow re-syncs them to the
final versions after bumping.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- next 16.2.7 -> 16.2.6 in both apps. 16.2.7 regresses Turbopack dev route
matching for API routes nested below a dynamic segment (probed in the
private repo: /api/items/[id]/fork, /api/scenes/[id]/events 404 with the
router's HTML not-found; production builds unaffected; bisected
16.2.6 good / 16.2.7 bad). 16.2.6 carries all the 16.2.5/16.2.6
security fixes — only the bugfix backports are forgone.
- Remove @react-three/uikit-lucide from @pascal-app/editor dependencies:
zero imports in this repo or private-editor; dead weight in every npm
consumer's install.
- Pin @visual-json/react "latest" -> "^0.4.0" (current resolution;
"latest" in a published package's deps is unreproducible and was
inconsistent with private-editor's ^0.4.0).
- Add root override three: 0.184.0, mirroring private-editor's dedupe —
drops the nested stats-gl three@0.170.0 so the lockfile resolves a
single three (the stated single-instance invariant now holds here too).
Verified: build, check-types, biome check, 931 package tests green;
lockfile resolves one next (16.2.6) and one three (0.184.0);
oxide/lightningcss optionalDependency pins still match resolutions.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Range edits:
- next 16.2.1 -> 16.2.7 in apps/editor + apps/ifc-converter. 16.2.5/16.2.6
fixed six high-severity advisories (middleware bypass, DoS, SSRF, XSS,
RSC cache poisoning); 16.2.7 is bugfix backports. No API/config changes.
- typescript 6.0.2 -> 6.0.3 everywhere, including aligning the 5.9.3
stragglers (@pascal-app/mcp, @repo/ui, @repo/eslint-config) that date
from the original scaffold and were never intentionally held back.
- @types/node in @pascal-app/mcp: ^25.5.0 -> ^22.19.20 — mcp was the only
workspace typed against non-LTS node 25; 22 matches the release
workflow's node and every other workspace.
- @number-flow/react ^0.5.14 -> ^0.6.0 (packages/editor, apps/editor);
the only breaking change (removed --number-flow-char-height CSS var)
is unused here.
- agentation ^2.3.2 -> ^3.0.2 (apps/editor devtool; v3 is a drop-in for
the props-less <Agentation /> usage, additions are opt-in).
- Root overrides: @types/react 19.2.14 -> 19.2.17,
@types/three 0.184.0 -> 0.184.1 (types-only fixes).
Lockfile refresh within existing ranges picks up react 19.2.7 (pairs with
next 16.2.7 — 19.2.6 had a server-action FormData regression), motion
12.40.0, three-mesh-bvh 0.9.10, @react-three/uikit-lucide 1.0.73, the
June radix wave, lucide-react 1.17.0, zustand 5.0.14, tailwind-merge
3.6.0, geist 1.7.2 (fixes Geist Mono ligature regression), react-grab
0.1.44, biome 2.4.16 + ultracite 7.8.2, turbo 2.9.17.
Held: three stays 0.184.0 (npm latest; single-instance constraint),
tailwindcss 4.3.0 + lightningcss 1.32.0 already match the pinned
optionalDependencies native binaries, eslint 10 major not taken
(@repo/ui is unconsumed legacy scaffold).
Verified: turbo build, check-types, biome check, and 931 package tests
green; bun.lock stays lockfileVersion 1 (CI bun 1.3.0 compatible);
single next/three resolution confirmed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix: resolve lint and type errors to enable CI
- Remove stale biome-ignore suppressions in bootstrap.ts, r3f.d.ts,
and parametric-node-renderer.tsx (rules no longer fire).
- Replace forEach callbacks that return values with for...of loops
in node-actions.ts and build-collider-world.ts
(lint/suspicious/useIterableCallbackReturn).
- Rewrite assign-in-expression guards in ceiling/tool.tsx to explicit
if-statements (lint/suspicious/noAssignInExpressions).
- Hoist useMemo/useCallback above early return in chimney/panel.tsx
(lint/correctness/useHookAtTopLevel).
- Add `^build` to turbo check-types dependsOn so packages/core dist is
up-to-date before type checking — this resolves all 32 type errors
which were caused by stale dist, not missing symbols.
* ci: add lint and typecheck workflow on push/PR
Adds a quality gate that runs `bun run check` (Biome) and
`bun run check-types` (TypeScript) on every push and PR to main.
Uses concurrency groups to cancel stale runs. Closes#147.
---------
Co-authored-by: Pascal <open@pascal.app>
Slab and pool side walls assumed a CCW contour (the unflipped quad's right-hand normal is outward only for CCW), but outsetPolygon and the slab tool preserve the drawn winding. A CW-drawn slab therefore got inward-facing side-wall normals that FrontSide culling dropped, so the slab read as see-through from the camera-facing side (~half the time, depending on draw direction). Normalize the contour to CCW (reverse when signed area < 0) before building both the positive-slab and pool geometry.
Caps are unaffected (Earcut normalizes the outer ring); holes are already double-emitted + winding-normalized; ceilings use flat ShapeGeometry (no extruded walls); autoFromWalls slabs are already CCW so this is a no-op for them.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Live slab-stacking Y previews for all floor-placed kinds (item/shelf/spawn/column/stair) during placement + both move pathways, via a shared core resolver; canonical positions unchanged.
- Unified 3D handle system (one drag pipeline + one visual primitive) with forgiving invisible hit-areas on every handle, kept on EDITOR_LAYER so they don't poison the MRT scene pass.
- Hover + click-to-edit slab holes in 3D (manual hole -> hole editor; stair/elevator hole -> select owner); generic cross-arrow polygon-move grip; normalized handle interaction colors.
- NaN-safe node mutations + non-finite shadow-light bounds guard.
- Built on #373 (level-scoped alignment / registry slab tool); #373 owns X/Z alignment, this owns Y floor-stacking.
Replace the seven separate display-control buttons in the canvas toolbar
(render, theme, edges, grid, shadows, units, camera) with a single
"Display" dropdown, matching the simplification already shipped in the
hosted editor. Grid, shadows, camera and units are direct toggles that
keep the menu open; render, edges and theme are submenus.
Portal DropdownMenuSubContent so the side-opening submenus escape the
parent content's overflow-x-hidden clip, and re-export the submenu
primitives (Sub/SubTrigger/SubContent/Separator) from @pascal-app/editor.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add `bun clean:cache` to clear .turbo / .next / .swc / node_modules
caches across apps, packages, and tooling — mirrors the command in the
private-editor root so a stale-cache reset works the same in both repos.
Also add a `restart` convenience: kill → clean:cache → dev.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bundles three fixes to the shared PolygonEditor (slab/ceiling boundary &
hole editing):
- Console error: defer the cross-store onPolygonPreview(null) write into a
useEffect so committing a drag no longer updates another component
(NodeArrowHandles) during PolygonEditor's render.
- Vertex grab: make the edge bar visual-only (raycast disabled) so it can
no longer steal clicks from the vertex/midpoint handles overlapping it;
edge dragging runs through the chevron arrow outside the polygon edge.
- Outlines: render each handle as a single SCENE_LAYER mesh with a node
material (MeshBasicNodeMaterial / useArrowMaterial) and pointer handlers
attached directly, matching the registry arrow gizmos. This puts the
handles in the ink-edge post-pass so vertex/midpoint cylinders, the
chevron arrows, and the move sphere read as outlined 3D plates while
staying grabbable. No paired hit mesh needed — the R3F event raycaster
picks SCENE_LAYER too.
Known follow-up (tracked, out of scope): SCENE_LAYER handles can appear in
user-driven capture-mode snapshots, same as the existing arrow gizmos; to
be hidden uniformly later via the thumbnail:before-capture toggle.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Backport from monorepo PR #310 (fix/april-pass):
1. WebGPU renderer race on Canvas remount
Cache the in-flight WebGPURenderer promise per canvas element so
concurrent configure() calls from R3F's useLayoutEffect await the
same init() instead of creating duplicate renderers. Fixes
intermittent 'resolve target size does not match' errors when
navigating between projects and home.
2. Duplicate item loses its scale
Add scale to the field set in useDraftNode.commit() so duplicated
items preserve their original scale instead of falling back to
[1,1,1].
Co-authored-by: Pascal <open@pascal.app>
Major changes:
- Roof system rewrite with roof-segment support
- Scene store refactor
- Spatial grid improvements
- Item light system
- Post-processing and selection manager updates
- Perf monitor component
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: harden viewer/editor renderer init and error handling
* Bump @biomejs/biome and turbo versions
Update devDependencies: bump @biomejs/biome from ^2.4.4 to ^2.4.6 and turbo from ^2.8.12 to ^2.8.13. Regenerated bun.lock to reflect the updated resolved package versions.
* Restore inline zone label editing on canvas
* Add project versioning & publish flow
Introduce project model versioning and publishing support.
- DB: add published_model_version column to projects (migration + schema + types).
- Models: add version status types and helpers, implement getProjectVersionStatus, enhanced getProjectModel to load draft/published/legacy fallbacks, saveProjectModel now manages draft creation/updating and avoids no-op saves, saveProjectVersion to lock/save/publish versions and create next draft, publishProjectModel to republish specific saved versions. Includes scene-graph equality checks and authenticated project ownership checks.
- UI: AppSidebar shows publish/draft status, polling refresh, and Save / Save & publish / Publish actions that flush the editor scene before version operations. Hook update: load scene from result.data.model.scene_graph.
- Public project loader: prefer published version with legacy fallbacks.
This enables safe draft editing, explicit saves, publishing, and keeps autosave working across version locks.
* Add project versioning UI, APIs & preview mode
Introduce full version management support: UI, backend actions, and editor integration.
- UI: Add a Versions popover to the app sidebar with search, relative timestamps, preview, restore and publish controls; disable version actions while previewing and show proper labels/states. Imported new icons, popover and tooltip primitives and added formatRelativeTime helper.
- Actions: Add ProjectVersionListItem type and APIs getProjectVersionList and getProjectVersionByNumber to list and fetch saved (non-draft) versions.
- Hooks: Extract applySceneGraphToEditor and sync editor selection logic; ensure scene loading applies selection and supports preview mode (which suppresses autosave).
- Store: Add isVersionPreviewMode to project store with setter and isSceneLoading flag usage to prevent autosave while previewing.
- Misc: Wire up version list loading, previewing, restoring and publishing flows, and refresh version status/list after actions.
These changes enable browsing historical project versions, previewing them without triggering autosaves, and restoring or publishing selected versions.
* Improve version preview, restore flow & draft handling
- Add scene graph snapshot to preserve unsaved work during preview
- Include draft versions and metadata in version list
- Add getProjectVersionById for direct ID-based lookups
- Add autosave status to project store
- Refactor sidebar version UI (remove search, use save icon)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Extract reusable control components (SliderControl, MetricControl, SegmentedControl,
ToggleControl, ActionButton, PanelSection) and PanelWrapper to reduce duplication
across all property panels. Net reduction of ~500 lines.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Overhaul viewer overlay with a unified bottom toolbar, dark theme support,
theme toggle, camera orbit/top-view controls, and fix TypeScript array
access errors for level and wall mode cycling.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat(community): filter empty projects from public gallery
Add is_empty column to projects table so the public gallery only shows
projects with actual content. Scene graph emptiness is computed on save
and on creation, and a backfill migration marks existing non-empty
projects. Also cleans up import ordering, fixes README migration path,
and removes stale feedback table migration.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Use ESNext modules and bundler resolution
Update packages/db tsconfig to emit ESNext modules and use 'bundler' moduleResolution. This enables modern ESM output and bundler-style resolution for the db package (keeps outDir and rootDir unchanged).
* feat(editor): add dark mode theme and grid visibility toggle
Add theme state to viewer store with light/dark modes, dark-aware
lighting and background colors, grid show/hide toggle in settings,
and theme toggle buttons in the sidebar.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Add ground occluder, animated lighting & UI tweaks
Introduce a ground occluder and smoother animated lighting while adjusting editor UI and icons. Viewer: add GroundOccluder (uses polygon-clipping to union slab/zone polygons) and AnimatedBackground, integrate both into the Canvas; improve Lights to interpolate intensities/colors/ambient for smooth theme transitions. Editor: refactor sidebar header to support inline project title editing and move the theme toggle; replace some lucide icons with image assets and add a settings icon (apps/editor/public/icons/settings.png). Also add polygon-clipping to the viewer package dependencies.
* Update dark mode background color and clean up imports
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* Tree: add isLast prop & draw connectors
Introduce an optional isLast prop across all site panel tree node components and TreeNode so children know when they're the last sibling. TreeNodeWrapper now renders vertical and horizontal connector lines (adjusted by depth and isLast) and keeps the toggle button clickable (z-index). Children are passed isLast when mapped, so the UI can stop the vertical line for final siblings. Also bump several deps in apps/editor package.json and update the lockfile accordingly.
* chore: clean up monorepo dependencies and update packages
Move app/library dependencies out of root package.json into their
respective workspaces. Root now only contains monorepo tooling
(turbo, biome, supabase CLI, typescript, portless, ultracite).
Updates:
- next 16.1.0 → 16.1.6
- drizzle-orm ^0.39.0 → ^0.45.1
- drizzle-kit ^0.30.0 → ^0.31.9
- drizzle-zod ^0.5.1 → ^0.8.3
- three-bvh-csg ^0.0.17 → ^0.0.18
- supabase 2.75.3 → 2.76.15
- typescript 5.9.2 → 5.9.3 (all workspaces)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Use semantic theme tokens and enable dark mode
Replace hardcoded zinc color classes with semantic design tokens (text-muted-foreground, text-foreground, border, bg-background, bg-border) across the action menu, camera controls, control modes, and view toggles for consistent theming. Update separators and borders to use bg-border/border-border. Add useEffect in the editor root to add/remove the 'dark' class on document.body and apply 'dark text-foreground' to the root container so the UI renders in dark mode; also import useEffect.
* Persistable sidebar width & resizer
Introduce a zustand store to persist sidebar width (key: `sidebar-preferences`) and track dragging state. Default width is 288px (18rem) and is clamped between 288 and 800px. Wire the store into SidebarProvider to drive the CSS variable for width and expose a data-dragging attribute. Add a SidebarResizer component that handles pointer events to resize the sidebar, toggles dragging state, updates cursor/user-select, and disables transitions while dragging. Small class and structure adjustments ensure the resizer is rendered and resizing behaves smoothly.
* Editor: floating action menu, selection/phase tweaks
Add a FloatingActionMenu (move/duplicate/delete) that attaches to selected 3D nodes and integrates with editor/viewer state; includes new cursor SVG and layout wrapper to use the custom cursor. Improve selection and phase behavior: auto-select first building+level on scene load (moved/centralized in project scene hook and editor init), add resolveBuildingId helper, and enhance SelectionManager to auto-switch between structure/furnish based on clicked nodes and to preserve building/level context when changing selection. Update sidebar tree node click handlers to switch phases for structural vs item nodes and stop hiding nodes by phase (keep tree items visible across phases). Add keyboard escape behavior to clear selections while keeping building/level context and reset selected reference. Misc: register unified event listeners for selection, position floating menu over objects using three.js Box3, and various small integration fixes.
* Add SceneLoader, loading states & editor fixes
Add a SceneLoader component and associated CSS loader styles and wire it into Editor, Viewer and page-level flows so a loading UI displays while project/scene data loads. Replace useLayoutEffect in editor page with a client-mounted useEffect guard to avoid hydration issues. Introduce isSceneLoading state and setter in the project store and set/clear it in useProjectScene; include sceneGraph when creating a new project and clear the scene beforehand.
Other changes: type-guard moving/duplicating logic in FloatingActionMenu and remove duplicated id on clones; refactor auto-selection logic for site/building/level and auto-select build/wall for empty levels in editor index and useProjectScene; optimize ZoneSystem to run per-frame (useFrame) and reduce unnecessary updates to visibility/label positions; add animated active background for layer toggle (motion) in site panel; add keyboard shortcuts to jump between levels (Ctrl/Cmd+ArrowUp/Down); simplify community-hub project-created handler to navigate straight to editor. These changes improve UX during load, enforce safer node operations, and optimize runtime rendering.
* Improve selection logic and refine UI components
Multiple editor and viewer updates:
- Selection: enhance selection-manager to support modifier (Meta/Ctrl) multi-select, compute next selection logic, track modifier keys, prevent grid deselect races, and add debug logs. Adapted selection handlers throughout scene/editor components to pass native events and modifier state.
- Sidebar / Site panel: refactor site panel to inline a LevelReferences UI (replacing the removed references dialog). Add upload flow for scan (.glb/.gltf) and guide images, handling file size/type checks, project asset upload/delete calls, and per-level reference lists. Add MultiSelectionBadge for showing/clearing multi-selection and animated expand/collapse for levels. Several tree-node components now use a shared handleTreeSelection helper and propagate click events properly.
- UI polish & icons: change dark theme color tokens for better contrast; increase button sizes and icon sizes across action menus; swap some lucide icons for image assets (rotate, topview, select, build, mesh, floorplan, level, etc.) and add new public icons.
- PascalRadio: replace popover with a framer-motion expandable panel, add outside-click handling, animated transitions, and minor UI tweaks.
- Other: minor viewer hook/selection-manager updates and tweaks to control modes and view toggles to support image icons and consistent sizing.
These changes improve multi-select reliability, user interactions in the sidebar, and overall visual polish with new icons and animations.
* Fix TypeScript build errors in selection-manager and scene-loader
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* Polish editor UI, radio, and state logic
Multiple UI and state updates across the editor and viewer:
- PascalRadio: Move radio play state into audio store (isRadioPlaying), update icons/behaviors (Volume2/VolumeX), remove autoplay UI, ensure pause/resume respects muted and radio playing state.
- use-audio: Add isRadioPlaying, setRadioPlaying and toggleRadioPlaying to store; initialize state accordingly.
- Action menu: Add layout/motion to container, refine transition, only show furnish/structure rows in build mode, tweak transition classes and hover/opacity behavior.
- Furnish/Structure tools: Simplify inactive styling, change click behavior to only select tools (no direct deselect), remove "click to deselect" tooltip text.
- Sidebar/Icon rail: Update logo link styling and image sizing; AppSidebar: add inline editable project title (optimistic local update + server update via updateProjectName), keyboard handling, and minor header layout changes.
- Site panel: Add visual tree/branch lines, replace some icons, reorganize levels list and provide an Add level button, adjust spacing and layout for property/levels sections.
- InlineRenameInput: Small height/spacing adjustments for inline inputs.
- use-editor: Reset mode to 'select' when switching phases, ensure reasonable default tools when entering build mode, simplify setStructureLayer to reset mode/tool and viewer selection.
- use-viewer: Improve selection hierarchy guard so children are only reset when not explicitly provided in updates.
These changes improve UX consistency, state predictability when switching modes, and add inline project renaming with optimistic update.
* Introduce isEditor mode and editor UX updates
Add an isEditor flag (Viewer prop + store) and wire it from the Editor to enable editor-specific behaviors. Ceiling system: show ceiling grids per-level (or when ceiling tool active) by walking node ancestry and respecting active level/selection. Zone renderer: only show site edge labels in editor and add inline editable zone names (with hover/edit UI and save/escape handling). Auto-name new walls/doors/windows (incremental counts scoped by level) and simplify default names shown in various panels/tree nodes. Sidebar/site-panel: reverse level rendering, adjust tree-line styling, auto-expand parents when descendants are selected, and refactor zone row actions (camera view/capture/clear). UI polish: updated action-menu button styles and ensure keyboard shortcut 'b' switches to build mode. Misc: various tree node and item selection/hover improvements and minor refactors to support the above.
* Fix sidebar flex layout and scrolling
Adjust sidebar panel flexbox classes to ensure headers/controls don't collapse and content areas scroll correctly. Changes include adding shrink-0, flex-1 and min-h-0 to BuildingItem and buildings list containers, restructuring the active building panel so LevelsSection/LayerToggle are fixed height while ContentSection gets an overflow-y-auto scroll area, and making the site header non-shrinking with conditional overflow for the main panel when phase === "site". Uses the cn helper for conditional classes.
* Fix TypeScript build errors with AnyNodeId indexing and type narrowing
Cast string-typed node IDs and parentIds to AnyNodeId when indexing
into the nodes Record, fix motion transition type literal, and remove
redundant mode check in setMode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* Remove .env.local guard; add portless dep
Remove the check that blocked a local .env.local in apps/editor's dev script and simplify the dev startup to source the root .env. Add portless@^0.4.2 to the project dependencies in package.json. Lockfile updated accordingly.
* Improve tool cursors, previews, and contextual tools
Revamp editor tool visuals and behaviour: replace mesh cursors with a new CursorSphere Group (adds ground marker, vertical indicator and optional tool icon tooltip), unify preview colors to #818cf8, add ground-level previews and ghost lines for ceiling and roof tools, and update slab/zone/wall visuals to match. Add automatic build-mode switching and contextual highlighting for structure tools via a new useContextualTools hook, and relax action-menu visibility checks so tool rows are shown even when not in build mode. Minor typing/import adjustments and small opacity/placement tweaks across multiple tool components.
* Keep tools active and refine action-menu styles
Stop auto-deactivating tools in RoofTool and ZoneTool by removing setTool(null) (and setMode('select') in roof). Add hasActiveTool checks and small layout padding to FurnishTools and StructureTools, and update button classes to improve visual emphasis: smoother transitions, stronger active rings/scale, and dimming/grayscale of non-active tools when another tool is active. These changes improve UX by keeping the selected tool active and giving clearer visual feedback in the action menu.
* Improve selection behavior and refresh UI styling
SelectionManager: add global enter/leave/double-click handlers to support cross-phase hovering and auto-switching into structure/furnish on double-click; normalize click handling (explicitly coalesce shiftKey). Remove per-strategy enter/leave listeners.
UI panels & controls: unify and modernize styles across many panels (ceiling, door, item, reference, roof, slab, wall, window) and action buttons — rounded-md, neutral borders, subtle shadows, translucent headers and consistent hover/focus states. Update view toggles icons and toggle styling.
NumberInput: integrate @number-flow/react NumberFlow for formatted value display, add visual drag progress indicator and refine input/label interactions and styling.
Sidebar: replace rename-popover with inline-rename-input and update tree nodes to use inline editing. Add slider-demo and tweak slider implementation. Update package.json accordingly.
* Use Barlow font across editor UI
Add the Google Barlow font and expose it as a CSS variable, update theme font variables in globals.css, and apply the new font across the editor UI. Imports: add Barlow in app/layout.tsx and include its variable on <html>, set body to use font-sans. Apply font-barlow or font-mono classes to headings, labels, numeric readouts and buttons across multiple panels and primitives to standardize typography. Also update button base variant to include font-barlow. Remove the PhaseSwitcher component and its import/usage from the action menu.
* Replace button wrapper with div in LevelItem
Replace the outer <button> around the LevelItem content with a <div> to avoid nesting interactive button elements (and the resulting invalid HTML/interaction issues). Preserves the original classes and onClick/onDoubleClick handlers so behavior remains the same and allows the PopoverTrigger/button children to function correctly.
* Refine site panel list styles and spacing
Update the SitePanel and TreeNode UI to use compact, border-bottom list rows instead of rounded, card-like items. Simplified active/hover states to use bg-accent variants and reduced shadow/ring styles for a cleaner look. Adjusted paddings (pl/px/py) and container layouts (many sections switched to flex-col) and increased tree node indent/paddingRight for consistent alignment. These changes unify spacing and visual hierarchy across levels, buildings, zones and tree nodes.
* Add auto-scroll to selected items and refine icon styles
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Render an interactive Scene Graph in the Settings panel using @visual-json/react. Introduces SceneNode/SceneGraphNode types and buildSceneGraphValue to build a tree (handles missing nodes and cycles), and adds handlers to block drag/drop/context/delete mutations inside the viewer. Adds @visual-json/react to apps/editor package.json and updates the dev script to forbid .env.local and source the root .env instead. Also adds a persistence migration in use-scene to preserve existing nodes and rootNodeIds when the persist version changes.
- Add show_scans_public and show_guides_public columns to projects table
- Add visibility toggles to editor sidebar settings panel (auto-save)
- Add visibility toggles to project settings dialog (auto-save)
- Propagate settings to community viewer (hide scans/guides for non-owners)
- Add updateProjectVisibility server action
- Fix username onboarding dialog stuck after DB reset (validate update affected rows)
- Add error handling to UsernameGate for stale sessions
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Aymeric Rabot