bf25af6addc95ad19c27bc418ff7d5f4280bf2fb
2
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
bf25af6add |
viewer: Fix Dutch roof trim artifacts (#452)
* Add roof surface placement support for items Items (e.g. solar panels) can now be placed on sloped roof surfaces. The placement system computes euler rotation from the roof surface normal so items sit flush on the slope instead of going inside. - Add roofStrategy to placement-strategies with enter/move/click/leave - Wire roof:enter/move/click/leave events in the placement coordinator - Add calculateRoofRotation in placement-math using surface normals - Support full 3D cursor rotation for sloped surfaces - Items on roofs are parented to the level with world-space rotation Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fixed conflict * Fix spiral stair openings and fence handle arrows * Implement roof trim planes and ridge vent clipping * Fix mansard roof and ridge vent placement * Fix mansard merged roof cutouts * Fix Dutch roof gable overhang * Refactor roof segment, ridge vent, and surface geometry Remove Dutch ridge axis abstraction and rework roof edit system, ridge vent clipping geometry, and roof surface placement. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Simplify Dutch roof shape * Add Dutch roof gable top geometry controls * Fix Dutch roof slope material slots * Render dutch roof tops as double-sided faces * Add auto ridge vent toggle to roof segments Track ridge vent auto-generation via an `autoRidgeVent` metadata flag so geometry changes only regenerate default vents when enabled, treating legacy segments with generated vents as auto-enabled for back-compat. Expose a panel toggle to opt in/out per segment. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Snap new walls to the floor below Feed the walls of the level directly beneath the active one into the draft snap pipeline as extra references, so a new wall can align with the floor below. They share the same local XZ origin, and the list is kept separate from the current-level walls so the measurement HUD and wall splitting only act on the active level. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Set Dutch roof shape defaults on type switch Seed the Dutch shape parameters (waist width/height/length, top rake thickness/length) with sensible defaults whenever a segment is created as or switched to Dutch, so the gablet is well-formed regardless of leftover values from the previous roof type. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Use green accent for corner and endpoint snap markers Color the corner/endpoint snap markers and the vertical cursor pillar green across the 2D floorplan beacon, the 3D alignment guide dots, and the wall snap beacon so snap targets read as a consistent accent. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Add magnetic wall snapping to the roof tool Snap roof draft corners onto wall corners, midpoints, crossings, and bodies on the active level and the floor below, reusing the wall tool's snap pipeline so the beacon and coloring match. The cursor's ground dot/ring is hidden while a wall snap is active to avoid overlapping the beacon glyph. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Update auto-generated Next.js route types path Regenerated next-env.d.ts now references ./.next/dev/types/routes.d.ts. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Show cutaway outline while dragging roof trim Slice an untrimmed segment volume generated from the live node instead of the registry mesh, whose CSG rebuild lags a few frames behind the drag and may still hold placeholder geometry — so the section outline now renders deterministically. Use LineBasicNodeMaterial so the outline draws under the WebGPU pipeline, and export generateRoofSegmentGeometry for the slice source. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Fill and clip roof trim cutaway, gate it to active drag Add a violet silhouette fill behind the cutaway outline, extend the section slicing to angled diagonal/corner trims via a generic vertical cut plane, and clip each slice to its footprint span so the infinite plane no longer sprouts stray lines across the rest of the roof. The cutaway now renders only while a trim handle is being dragged. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Separate and extend Dutch roof end slopes Pull the Dutch hip end slopes out of the watertight shingle shell into their own slab wedge so they can be reshaped independently, and extend each end slope inward up its own hip plane until the top edge meets the gablet's inner triangle. Refactor roof-segment shape geometry into a shared roof-segment-shape module. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Render roof trim cutaway as a material-only section cut Replace the triangle-mesh slicer with a CSG intersection of a thin slab against the untrimmed roof shell, so the cutaway shows red only on real material (wall + deck bands) and leaves the hollow attic empty. Add an analytic surface-edge outline, style both solid red like a SketchUp section, and make the cutaway persist whenever a segment is trimmed. Keep the merged roof shell visible during trim editing (re-trimmed live from each segment's drag override) instead of swapping in the per-segment meshes, whose abutting end-cap faces showed as stray white planes the commit never had. Extend each slab past free cut-line ends only — trimmed ends clamp to the cut line — so the red section stays inside the trim box. Re-export INTERSECTION from the viewer CSG surface for the editor. * Outline roof cutaway by fill silhouette, restyle to destructive red Derive the section-cut outline from the fill geometry's edges (EdgesGeometry) so it traces the real cut shape — wall/deck band boundaries and the hollow-attic edge — instead of just the top surface line. Drop the fill to 85% opacity and recolor both fill and outline to the app's destructive red, matching the delete/destructive UI. * Include roof accessories in trim clipping and red cutaway Roof accessories (chimney, vents, skylight, dormer, gutter, downspout, solar-panel, cupola) now slice at the trim plane like the roof shell and appear in the red section-cut while dragging a trim handle: - Export clipGeometryBySegmentTrim from the viewer as a reusable segment-local trim-clip primitive. - Add a shared useSegmentTrimClippedGeometry hook + TrimClippedMesh wrapper (nodes) that slice accessory geometry by the host segment's live trim override, so the cut tracks the drag. - Wire the clip into all 11 accessory renderers, including skylight glass panes and dormer window glass/frame/sill. - Feed every hosted accessory mesh into the editor's red cutaway, welding triangle-soup geometry (e.g. ridge vent) so CSG INTERSECTION yields a cross-section. - Register skylight in the scene-graph tree-node map so it shows in the outliner when placed on a roof. Co-Authored-By: Claude <noreply@anthropic.com> * Add smooth spline fences with editable curve handles Fences can now be drawn as one continuous Catmull-Rom/Bezier curve via an optional `path` (+ per-point `tangents`), selectable in a Straight/Curved mode toggle. Selected spline fences expose draggable control-point dots (hexagon) and symmetric tangent handles (circle) joined by a violet line, editable in both 2D plan and 3D. Side-move arrows are dropped for splines. Co-Authored-By: Claude <noreply@anthropic.com> * Fix dutch roof ridge vent handling * Fix Dutch ridge vent placement and support * Fix Dutch roof trim artifacts * Fix Dutch roof trim preview geometry * Tag roof trim overlay meshes with EDITOR_LAYER Child meshes relied on a parent group's layer, which three.js does not propagate, so the trim section/rail/plane overlays rendered on the scene layer — getting inked/SSGI-darkened and leaking into thumbnail exports. Co-Authored-By: Claude <noreply@anthropic.com> * Apply Biome cleanup * fix(core): address Dutch roof review feedback * chore: apply biome check cleanup * fix(core): relax Dutch roof surface helper input * fix * Fix biome checks and dev verification * fixes * Remove unsupported Biome noShadow override * Improve roof interactions and fence editing * Fix fence drag and ridge vent default handling * editor: drop wall-snap debug log, gate curved-fence finish hint on draft start Remove the leftover TEMP DIAGNOSTIC console.log in the wall tool's onMove hot path. Curved fences commit on a closing gesture (double-click / Enter) rather than per-click, so surface a 'Finish curve' hint in the fence HUD — but only once a point has been placed and a curve is actually in flight. The draft point count is published from SplineFenceDraft into a small ephemeral editor store (useFenceCurveDraft) that the contextual helper reads, mirroring the existing useSegmentDraftChain pattern. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: Wassim SAMAD <wass08@gmail.com> |
||
|
|
a71de82ccb |
nodes: add MEP movement controls and DWV parity (#438)
* Add roof surface placement support for items Items (e.g. solar panels) can now be placed on sloped roof surfaces. The placement system computes euler rotation from the roof surface normal so items sit flush on the slope instead of going inside. - Add roofStrategy to placement-strategies with enter/move/click/leave - Wire roof:enter/move/click/leave events in the placement coordinator - Add calculateRoofRotation in placement-math using surface normals - Support full 3D cursor rotation for sloped surfaces - Items on roofs are parented to the level with world-space rotation Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fixed conflict * feat(duct): ceiling-snap drawing + connected-joint endpoint move Duct draw tool's ceiling mode now hangs each path point just below the ceiling actually covering it (per-room heights tracked), with a translucent surface highlight and a plumb line to the floor so the in-flight point reads clearly from any angle. Dragging a duct corner that sits on a fitting now carries the fitting's other ducts along (port-connectivity second hop), so the joint moves together instead of tearing apart. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): detach + vertical modifiers for duct/pipe joint editing Alt detaches a dragged duct/pipe endpoint or fitting from its connected joint (no elbow re-aim, no connectivity follow); Ctrl/Cmd drives vertical riser movement on the fitting move. Behavioral parity across 2D and 3D. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): full DWV pipe parity for joint editing Bring pipe-segment endpoint drags and pipe-fitting moves to parity with duct: free-drag endpoints, Alt-detach, Ctrl/Cmd-vertical riser, elbow re-aim, and connectivity follow. Generalizes the shared elbow-reaim and auto-fitting helpers to dispatch by run kind so 2D and 3D share one path. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): wall-style arrow handles for duct fittings + segments Add violet directional arrow affordances to duct-fitting selection (height, move cross, rotate arc) mirroring the duct-segment rig: portaled into the parent frame to stay out of the selection outline, rendered via the shared HandleArrow, and carrying mated-run connectivity through the single-undo dance. The move cross engages press-drag-release (placementDragMode) the same way the floating drag does, so the markup hit-areas go inert and the fitting move tool commits on pointer-up. Also re-export the HandleArrow primitives from @pascal-app/editor and extend the duct-segment side-move/floorplan affordances. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): click-to-latch cube handles for duct + fitting editing Replace the hover-reveal / multi-handle selection rigs with a single click-to-latch cube that opens a directional cluster, shared between duct segments and fittings via a new selection-handles module (HandleCube / MoveChevron / RotateArc, all sized to the roof pitch cube). - Duct segment: per-vertex + run-center cubes reveal axis-locked move chevrons (down arrow always shown), plus a roll arc at the run center. - Duct fitting: center cube reveals six ±XYZ move arrows and three per-axis rotation arcs (oriented in place), replacing the old height/move/rotate trio with axis-cycling. - Rotation (fitting arcs + duct roll) snaps to 45° steps; Shift = smooth. - thin chevron profile + press-drag-release commit retained. * fix(mep): orient duct roll arc consistently + drop Ctrl-vertical drag Build a fully-determined basis for the duct roll gizmo so the curved arrow always seats at the top-outer 45° corner regardless of run direction, instead of an arbitrary apex from a single setFromUnitVectors. The selection-rig ±Y arrows now own vertical movement, so the redundant Ctrl-modifier riser drag is removed from the fitting move tool. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): run-aligned duct handles, swing snapping, elbow flatten Align the duct run-center cube + horizontal arrows to the run axis (matching the per-vertex handles) while keeping whole-run translate. Endpoint side / up-down swing arrows now follow grid snap points and port-snap onto nearby collars (Shift sweeps smoothly). Relax elbow realign + fitting schemas to flatten to a straight 0° coupling. Surface HVAC-specific hints in the select-mode helper panel for duct / fitting. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): per-segment linesets/liquid-lines with joint-follow editing Linesets and liquid lines now commit one independent two-point node per drawn segment instead of folding into a single mitered polyline, so each line selects and deletes on its own. Endpoint caps fill shared-coordinate joints so connected segments still read as continuous pipe. Dragging a shared endpoint carries mated segments along via port connectivity (Alt detaches), so a run still edits as one welded piece. Liquid-line follow mode traces the whole connected lineset run, laying a per-segment parallel line down its full assembled length. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): vertical-offset auto-routing on duct center-cube ±Y drag Lifting/lowering a connected run with the run-center cube now keeps each connected end welded to its stationary partner instead of dragging the whole network. Run-to-run ends get the classic S/Z offset (two elbows + plumb riser, partner trimmed back one leg); elbow-connected ends form a clean L — the existing elbow stays put and re-aims its collar vertical, with one new top elbow + riser reconnecting to the lifted endpoint. The offset is ghosted live and minted as a single undo step on release. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Add roof accessory placement guides Measure roof accessory placement against the active roof face using visible surface bounds and preview geometry footprints. Add dormer-local guides and special linear handling for ridge vents and gutters. * Improve duct and placement routing * Fix duct vertical movement routing * Fix duct vertical offsets and roof accessory movement * Add DWV movement parity and line endpoint controls * Fix MEP handle review issues * Fix chimney placement and duct offset cleanup * Use snapped targets for roof accessory commits * fix(nodes): repair MEP movement review issues - auto-fitting: tee branch now follows the drawn lateral angle; update the stale square-tee test + doc comment that contradicted the rewrite - duct-segment: re-enable the vertical auto-offset rewind (the disabled stub left mintedIds empty, so re-dragging a tagged duct stranded old elbows/risers and stacked duplicates); remove the dead stub - duct-segment: strip the stale auto-offset tag on manual corner/roll commits so the horizontal-move path no longer trusts an out-of-date base - chimney: resume history before mutating segment children arrays so a cross-segment move reparents in one tracked transaction (undo stays consistent) - dormer: align schema test with the new windowSill=false default * fix: address mep movement review issues * fix: address follow-up mep review comments * fix: address additional mep review comments --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: pascal-open-bot <open@pascal.app> |