* Add roof surface placement support for items
Items (e.g. solar panels) can now be placed on sloped roof surfaces.
The placement system computes euler rotation from the roof surface
normal so items sit flush on the slope instead of going inside.
- Add roofStrategy to placement-strategies with enter/move/click/leave
- Wire roof:enter/move/click/leave events in the placement coordinator
- Add calculateRoofRotation in placement-math using surface normals
- Support full 3D cursor rotation for sloped surfaces
- Items on roofs are parented to the level with world-space rotation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fixed conflict
* Fix spiral stair openings and fence handle arrows
* Implement roof trim planes and ridge vent clipping
* Fix mansard roof and ridge vent placement
* Fix mansard merged roof cutouts
* Fix Dutch roof gable overhang
* Refactor roof segment, ridge vent, and surface geometry
Remove Dutch ridge axis abstraction and rework roof edit system,
ridge vent clipping geometry, and roof surface placement.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Simplify Dutch roof shape
* Add Dutch roof gable top geometry controls
* Fix Dutch roof slope material slots
* Render dutch roof tops as double-sided faces
* Add auto ridge vent toggle to roof segments
Track ridge vent auto-generation via an `autoRidgeVent` metadata flag so
geometry changes only regenerate default vents when enabled, treating
legacy segments with generated vents as auto-enabled for back-compat.
Expose a panel toggle to opt in/out per segment.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Snap new walls to the floor below
Feed the walls of the level directly beneath the active one into the
draft snap pipeline as extra references, so a new wall can align with
the floor below. They share the same local XZ origin, and the list is
kept separate from the current-level walls so the measurement HUD and
wall splitting only act on the active level.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Set Dutch roof shape defaults on type switch
Seed the Dutch shape parameters (waist width/height/length, top rake
thickness/length) with sensible defaults whenever a segment is created
as or switched to Dutch, so the gablet is well-formed regardless of
leftover values from the previous roof type.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Use green accent for corner and endpoint snap markers
Color the corner/endpoint snap markers and the vertical cursor pillar
green across the 2D floorplan beacon, the 3D alignment guide dots, and
the wall snap beacon so snap targets read as a consistent accent.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Add magnetic wall snapping to the roof tool
Snap roof draft corners onto wall corners, midpoints, crossings, and
bodies on the active level and the floor below, reusing the wall tool's
snap pipeline so the beacon and coloring match. The cursor's ground
dot/ring is hidden while a wall snap is active to avoid overlapping the
beacon glyph.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Update auto-generated Next.js route types path
Regenerated next-env.d.ts now references ./.next/dev/types/routes.d.ts.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Show cutaway outline while dragging roof trim
Slice an untrimmed segment volume generated from the live node instead of
the registry mesh, whose CSG rebuild lags a few frames behind the drag and
may still hold placeholder geometry — so the section outline now renders
deterministically. Use LineBasicNodeMaterial so the outline draws under the
WebGPU pipeline, and export generateRoofSegmentGeometry for the slice source.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Fill and clip roof trim cutaway, gate it to active drag
Add a violet silhouette fill behind the cutaway outline, extend the
section slicing to angled diagonal/corner trims via a generic vertical
cut plane, and clip each slice to its footprint span so the infinite
plane no longer sprouts stray lines across the rest of the roof. The
cutaway now renders only while a trim handle is being dragged.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Separate and extend Dutch roof end slopes
Pull the Dutch hip end slopes out of the watertight shingle shell into
their own slab wedge so they can be reshaped independently, and extend
each end slope inward up its own hip plane until the top edge meets the
gablet's inner triangle. Refactor roof-segment shape geometry into a
shared roof-segment-shape module.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Render roof trim cutaway as a material-only section cut
Replace the triangle-mesh slicer with a CSG intersection of a thin slab
against the untrimmed roof shell, so the cutaway shows red only on real
material (wall + deck bands) and leaves the hollow attic empty. Add an
analytic surface-edge outline, style both solid red like a SketchUp
section, and make the cutaway persist whenever a segment is trimmed.
Keep the merged roof shell visible during trim editing (re-trimmed live
from each segment's drag override) instead of swapping in the per-segment
meshes, whose abutting end-cap faces showed as stray white planes the
commit never had. Extend each slab past free cut-line ends only — trimmed
ends clamp to the cut line — so the red section stays inside the trim box.
Re-export INTERSECTION from the viewer CSG surface for the editor.
* Outline roof cutaway by fill silhouette, restyle to destructive red
Derive the section-cut outline from the fill geometry's edges
(EdgesGeometry) so it traces the real cut shape — wall/deck band
boundaries and the hollow-attic edge — instead of just the top surface
line. Drop the fill to 85% opacity and recolor both fill and outline to
the app's destructive red, matching the delete/destructive UI.
* Include roof accessories in trim clipping and red cutaway
Roof accessories (chimney, vents, skylight, dormer, gutter, downspout,
solar-panel, cupola) now slice at the trim plane like the roof shell and
appear in the red section-cut while dragging a trim handle:
- Export clipGeometryBySegmentTrim from the viewer as a reusable
segment-local trim-clip primitive.
- Add a shared useSegmentTrimClippedGeometry hook + TrimClippedMesh
wrapper (nodes) that slice accessory geometry by the host segment's
live trim override, so the cut tracks the drag.
- Wire the clip into all 11 accessory renderers, including skylight
glass panes and dormer window glass/frame/sill.
- Feed every hosted accessory mesh into the editor's red cutaway, welding
triangle-soup geometry (e.g. ridge vent) so CSG INTERSECTION yields a
cross-section.
- Register skylight in the scene-graph tree-node map so it shows in the
outliner when placed on a roof.
Co-Authored-By: Claude <noreply@anthropic.com>
* Add smooth spline fences with editable curve handles
Fences can now be drawn as one continuous Catmull-Rom/Bezier curve via an
optional `path` (+ per-point `tangents`), selectable in a Straight/Curved
mode toggle. Selected spline fences expose draggable control-point dots
(hexagon) and symmetric tangent handles (circle) joined by a violet line,
editable in both 2D plan and 3D. Side-move arrows are dropped for splines.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix dutch roof ridge vent handling
* Fix Dutch ridge vent placement and support
* Fix Dutch roof trim artifacts
* Fix Dutch roof trim preview geometry
* Tag roof trim overlay meshes with EDITOR_LAYER
Child meshes relied on a parent group's layer, which three.js does not
propagate, so the trim section/rail/plane overlays rendered on the scene
layer — getting inked/SSGI-darkened and leaking into thumbnail exports.
Co-Authored-By: Claude <noreply@anthropic.com>
* Apply Biome cleanup
* fix(core): address Dutch roof review feedback
* chore: apply biome check cleanup
* fix(core): relax Dutch roof surface helper input
* fix
* Fix biome checks and dev verification
* fixes
* Remove unsupported Biome noShadow override
* Improve roof interactions and fence editing
* Fix fence drag and ridge vent default handling
* editor: drop wall-snap debug log, gate curved-fence finish hint on draft start
Remove the leftover TEMP DIAGNOSTIC console.log in the wall tool's onMove
hot path.
Curved fences commit on a closing gesture (double-click / Enter) rather than
per-click, so surface a 'Finish curve' hint in the fence HUD — but only once a
point has been placed and a curve is actually in flight. The draft point count
is published from SplineFenceDraft into a small ephemeral editor store
(useFenceCurveDraft) that the contextual helper reads, mirroring the existing
useSegmentDraftChain pattern.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Wassim SAMAD <wass08@gmail.com>
Polish pass on the placement/interaction overhaul. Five fixes:
- Item-on-item rotation box: the cursor box held the host-local yaw instead of
world yaw, so it diverged from the item by the host's rotation when stacked on
another item (fine on the floor). The box now derives world yaw from the
mesh/host quaternion in both the R/T handler and the move-start sync.
- 2D floorplan move now respects the snapping mode (parity with 3D): grid
quantization only in grid mode, alignment guides only in lines/magnetic mode;
Shift/Alt no longer hard-bypass. Item move also plays the move "tick" SFX on
any resolved-position change, like the 3D move.
- Wall-side item footprint side: the 2D footprint depth offset extended toward the
wall (centerLocalZ -depth/2) instead of into the room, mirroring the item across
the wall; flipped to +depth/2. Aligned the undefined-side anchor to the 3D
convention (front +1 / else -1).
- 3D placement preview side: the wall-side preview bounds + base plane used a -Z
(into-wall) convention; flipped to +Z (into-room) to match the body and the
fixed 2D footprint. The 2D live preview during a 3D wall placement now publishes
the plan rotation (wall angle + item yaw) instead of the world cursor yaw, which
was pi off on a wall face and flipped the footprint to the far side.
- Cmd/Ctrl+R no longer rotates/flips the selected node (it reaches the browser
reload); guard added to the global selected-node handler and the 2D move overlay.
Verified: core/editor/nodes tsc, biome, editor 162/0 + nodes 292/0 tests.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The footprint polygon uses `rotateVec` (R(-angle)) but the sprite was drawn via
SVG `rotate(+angle)`, so image and box counter-rotated and diverged by 2x the
item's rotation in the 2D floorplan. Negate the image rotation so the sprite
tracks its box (and the 3D orientation). Scoped to items — the only emitter of
the `image` floorplan geometry kind.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two fixes to the wall-endpoint reshape interaction.
selection-manager: a node:click is synthesized on R3F pointer-up, so an endpoint
handle that sits on the wall body lets the wall mesh (raycast-hit behind it from
a 3D angle) emit its own click on the same release — selecting the wall and
arming its move tool on top of the endpoint move. Ignore the body click while an
`endpoint` reshape owns the pointer. Scoped to `endpoint` so hole-edit (which
relies on node clicks to exit) is unaffected.
move-endpoint-tool: a press-drag committed on release but a tap dismissed, and
whether the tap's release ran at all raced the window pointer-up listener
mounting a tick after the handle's pointerdown ("works once, then needs a long
press"). Unify on one rule: commit only when the endpoint actually moved,
otherwise stay armed. A tap now grabs the endpoint (it follows the cursor; the
next click after a move commits) exactly like a press-drag — both engage
identically. Drops the now-dead hasDraggedRef.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two changes from the split-view / wall-endpoint perf + UX pass.
floorplan-panel: render the heavy 2D <svg> scene only when the panel is visible
(`isFloorplanOpen`, i.e. viewMode !== '3d'). The panel stays mounted in 3D
(display:none) to keep the portalled compass + viewport state warm, but the
registry layer / per-node InteractiveGeometry / handle layers no longer
reconcile on every scene change while invisible. Renders fully in 2D and split;
viewport pan/zoom is preserved across the toggle.
wall move-endpoint-tool: preview via `useLiveNodeOverrides` instead of writing
`useScene.updateNodes` every grid:move tick. The per-tick store write handed a
fresh `nodes` ref to every `useScene(s => s.nodes)` subscriber (WallPanel, the
contextual HUD, tooltips, floor plan), rebuilding them all each frame. Overrides
are merged by the wall system, wall panel, and 2D floor plan, so the preview
still tracks live with no store churn; the store is written once on commit, and
one Ctrl-Z reverts to the original endpoint. Also swallow the click that follows
every endpoint-tool release so it can't fall through to the wall body and arm
the wall move tool (no-drag tap or post-commit).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Validated live by Wassim.
- Wall grid is anchored to the wall PLANE (its foot), not the moving ghost, so
sliding a door/window only moves the reveal patch — the lattice stays a fixed
snap reference instead of "following" the opening.
- DoubleSide so the lattice renders when an opening is handled from the far side.
- depthTest is conditional: ON for the floor (the ground occludes a sub-floor
lattice) and OFF on a wall (visible through the wall from the opposite side).
- Resolution change is a uniform write only — `cellSize` no longer rebuilds the
uniform + material (which recompiled the shader and stalled on every step).
- Y follow snaps instantly (was a lerp); `gridY` state only updates on change.
- Reveal radius 5 → 12.
- Door/window publish the wall surface on mount (+ claim the pointer for the
wall) so the grid is vertical from the FIRST frame — no horizontal flash.
- Export the active-placement-surface module so the opening tools can publish.
- Drop the editor-side "Show Grid" setting: the 3D grid is now purely a
placement aid (shown only while placing/moving in grid-snap mode).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Door and window are placed via preset and moved with a bespoke wall-bound
`move-tool` (affordanceTools.move), not the draw tool — so the previous inline
triangle never showed for the paths actually used. Migrate both:
- move-tool (move + preset, the community path): publish the on-wall ghost pose
to `useFacingPose` in the same building-local frame the ghost renders in,
dropped to the floor under the wall (the ghost Y is the opening centre); clear
on every off-wall / hide / reveal / unmount path
- draw tool (standalone from-scratch path): publish the on-host pose, clear on
fallback/hide; frame depth read via a ref to keep the setup effect deps clean
Removes the now-dead `FacingIndicator` public export (the editor-side overlay is
its only consumer, via relative import). The unified overlay now covers every
placement/move path: items, column/shelf, stair, and door/window.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every placement and move path now publishes its ghost pose to a single
`useFacingPose` store, drawn by one editor-side `<FacingPoseIndicator>` overlay,
instead of each path drawing its own triangle (which left the nodes-package and
PlacementBox paths invisible):
- column/shelf presets + all moves (PlacementBox via move-registry, and
DragBoundingBox) now publish the pose, so the triangle finally shows
- stair create + move use a declarative `facingIndicator: { reversed: true }`
(new registry resolver) so the triangle sits before the entry pointing out —
resolved in one place, so create and move match automatically
- stair placement defaults to single and respects the shared `point`
continuation (C) toggle, like the other placement tools
Checkpoint on the placement-interaction epic: also carries the in-flight
continuation-profile extraction (lib/continuation), grid surface (item #8), and
HUD work. Door/window still render their own legacy inline triangle and are
migrated to the overlay next.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the legacy held-Alt mechanism on wall and fence drafting with a
mode toggle, mirroring the snapping-mode chip:
- Wall: `wallChainMode` room (auto-close on loop) / single. Room mode
finishes automatically when the new endpoint lands within the join-snap
radius of the chain's first vertex; single commits one wall per click.
- Fence: `fenceChainMode` continuous (chain until double-click/Esc) /
single. Fences are linear barriers, so continuous has no auto-close.
- Both: Alt-tap cycles the active drafting tool's chain mode (clean-tap,
scoped to wall/fence drafting); a clickable HUD chip shows the mode.
Persisted + migrated in `useEditor`.
Migrate wall and fence off held-Alt-bypass-alignment to the unified
convention: alignment now follows the magnetic snap mode, which frees Alt
for the toggle. 2D floorplan parity kept in sync with the 3D tools.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The MEP run/fitting/terminal tools anchored their cursor readout pill at
~+0.35m above the placement point, so with the tall CursorSphere line
(badge at +2.7m) the pill sat right on the cursor and overlapped it,
especially when zoomed in. Editor main (#438) already raised the duct
pill to +1.45m; this long-lived branch predates that merge. Bring every
MEP tool that uses the tall cursor onto the same +1.45m anchor:
duct/pipe/liquid/lineset runs, duct/pipe fittings, and duct-terminal.
hvac-equipment (height-aware anchor) and pipe-trap (no cursor line) are
left as-is — their HUDs already clear the ghost.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Roof-segment edit/move ignored the active snap mode and showed no chip:
- add snapProfile:'structural' so a body-move resolves the no-angle polygon
context (grid/lines/off) like every other structural move;
- resize uses getSegmentGridStep() (0 outside grid mode = the "smooth" resize
that used to need a held Shift), dropping the captured gridSnapStep + Shift;
- move drops its Shift bypass;
- the affordance dispatcher opens a boundary reshape scope for the resize so
the snapping chip shows and the context resolves.
2D rotation handles now match the 3D gizmo across all six rotate affordances
(column / elevator / roof-segment / shelf / spawn / stair): a shared
rotateAffordanceDelta snaps to the 15° step unless Shift (free), the
dispatcher opens the same ROTATE_HANDLE_DRAG_LABEL handle-drag scope the 3D
gizmo uses so the contextual HUD shows the "Shift = rotate freely" hint, and
the live degree readout snaps to match the committed rotation.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Wall and fence endpoint-move affordances hard-snapped to the grid via a
hardcoded WALL_GRID_STEP and always ran Figma line-alignment, ignoring the
active snapping mode. Now:
- grid step follows getSegmentGridStep() (0 outside grid mode), so lines /
angles / off no longer force a grid snap the mode chip says is inactive;
- Figma alignment is gated on isMagneticSnapActive() (the lines mode);
- angles mode angle-locks the endpoint off the fixed corner (free length),
mirroring the draft tool;
- fence drops its legacy Shift-bypass to match the wall's unified model
(Alt stays as linked-segment detach).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The shared polygon-vertex affordance snapped via snapPointToGrid(rawPoint), whose
default step is the hardcoded WALL_GRID_STEP (0.5m) — so slab/zone/ceiling vertex,
edge, and add-vertex edits always quantized to half-meters regardless of the
active mode OR the user's grid-step setting (plan open bugs #1-2). Use the
mode-aware getSegmentGridStep() (0 in non-grid modes) so grid quantizes to the
live step, lines/off pass through to the wall-snap/alignment resolver. Drop the
legacy shiftKey bypass from the slab/ceiling magnetic resolvers (they already
gate on isMagneticSnapActive).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Migrate roof/stair/elevator draft tools + the 2D floorplan move overlay off the
legacy Shift/Alt=bypass model onto mode-driven snapping (isGridSnapActive /
isMagneticSnapActive); Alt dropped (no validity gate). stair/elevator now use the
live grid step.
These three are placed as footprints, not directional draws, so the angle-lock
mode was meaningless: add NodeDefinition.snapDraftDirectional (default true; false
for roof/stair/elevator) so their draft resolves to the no-angle 'polygon' context
(grid / lines / off). snapContextOf takes an injected draftDirectionalOf, like
profileOf. Add toolHints to stair/elevator so they route through the contextual
HUD and show the snapping chip. Fix one stale Alt-bypass comment in the item
placement coordinator (#9: already force-only). +snapping-mode test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The 5 bespoke MEP movers (duct/pipe-segment, liquid-line, lineset, duct-fitting)
now read the active snapping mode (isGridSnapActive / isMagneticSnapActive)
instead of shiftKey=bypass. The moving scope already carries the node
(setMovingNode → begin('moving')), so the per-kind context resolves with no
extra wiring. Grid and alignment are now independent reads.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Migrate all 9 MEP kinds' placement tools onto the unified snapping model:
declare snapProfile ('item' for point-placed hvac-equipment / duct-terminal /
duct-fitting / pipe-fitting / pipe-trap; 'structural' for directional runs
duct-segment / pipe-segment / liquid-line / lineset), and replace the legacy
shiftKey-bypass reads with mode-driven isGridSnapActive / isMagneticSnapActive /
isAngleSnapActive. For runs the 45° lock becomes the cyclable 'angles' mode;
Alt stays the vertical-riser modifier (run drafting has no validity gate to
force). Port mating gated on "mode != off". Dropped stale "⇧ smooth/free" hints.
The bespoke MEP move-tool/selection (endpoint) tools stay on the legacy model —
they use setMovingNode(null) so no moving-scope context resolves yet; migrating
them needs scope-wiring first (follow-up).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The 3D MoveDoor/MoveWindow tools wrote useScene every frame during a move
(freeFollowAt + applyPreview alternating): the wall:move (R3F) / grid:move
(DOM) de-dup compared event.timeStamp across two event systems with different
clocks, so it never matched and the floor free-follow ran during on-wall
slides too, ping-ponging the host and churning the nodes ref → framerate
collapse in both 2D and 3D. Replace it with a single-clock wall-ownership
window (performance.now, ~4 frames): the floor follow stands down while a
wall/roof hit is fresh. On-wall slides now write no scene per frame (mesh +
useLiveTransforms only). Lower the live wall-cutout throttle 120→60ms now that
the per-frame churn is gone.
Also completes the door/window modifier-model migration (#10): Shift=cycle /
Alt=force-place, fully mode-driven snap, snapProfile:'item'; exclude
ground-line candidates from along-wall opening alignment; emit the move SFX
once per snapped step.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A catalog GLB ships its own animation clips (a ceiling fan's spin), but those
clips aren't in the editor scene graph, so the bake couldn't see them. Add an
`itemClipRegistry` (core, type-only three) that the item renderer fills with the
resolved clip per node while the scene is live; the GLB export reads it and
re-emits each item's clip onto the baked subtree, rebinding tracks to the cloned
spinning node's uuid. Catalog node names repeat across instances and the glTF
roundtrip rebinds by name, so the targeted node is uniquified per item
(`<id>__lamp_018`) — every fan animates independently.
The baked viewer plays these as looping ambient motion: `<id>: loop` clips are
set to LoopRepeat (not the door/window LoopOnce) and GlbItemAnimation drives
them off each item's toggle (lit/spinning by default).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Migrate the remaining floor-placed kinds onto the unified snapping/modifier
model and generalize floor collision so any solid floor kind blocks any other.
- shelf/column/spawn declare `snapProfile: 'item'` → contextual snapping chip,
Shift=cycle, Ctrl=grid step during placement; their tools read the active
mode (grid/lines/off) instead of legacy Shift/Alt bypass; spawn fresh
placement now respects alignment ("lines") like its move.
- Resize/radial handles claim the handle-drag scope (new RESIZE_HANDLE_DRAG_LABEL)
so the HUD shows no select-mode shortcuts mid-resize.
- Column move migrated to the generic MoveRegistryNodeTool (declare `movable`,
drop the bespoke move-tool) — gains mode-driven snapping, alignment, R/T,
slab lift, grid SFX, and the collision box for free. 2D move still routes
through `floorplanMoveTarget`.
- Cross-kind floor collision: new declarative `FloorPlacedConfig.collides`
(item/shelf/column opt in; spawn/MEP/stair stay off). `canPlaceOnFloor` now
treats every colliding floor kind as an obstacle (was item-only), reading the
declarative footprint; the generic move tool's red/green placement box gates
on `collides`. Column footprint uses the visible `columnFootprintHalf` extent
so the box/slab-lift/collision track the real (round/square) column size.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Generify the snapping/modifier HUD off the FSM scope and node declarations
instead of wall-creation-shaped, leaking pills.
- Per-context snapping (`snappingModeByContext`, persisted): wall / item /
polygon mode-sets with exclusive modes (grid | lines | angles | off), each
doing exactly what its chip says. Context is node-declared via the new
`NodeDefinition.snapProfile` ('item' | 'structural'); the resolver maps
(profile × action) → context with no per-kind switch.
- Scope-driven HUD: helper-manager reads the interaction scope; reshaping
(endpoint/curve/boundary) and item move get their own chip, no select-hint
leak. Rotate R/T rounds to 45°; Alt = force-place only (hidden for
structural kinds); Shift = cycle everywhere.
- Slab/ceiling drafting: Shift=cycle, mode-aware grid/angle, Enter finishes
(minDraftVertices); polygon boundary vertex/edge drag begins a reshaping
scope. Fix grid/angle being ignored on boundary edit + slab creation:
make resolveSurfacePlanPointSnap exclusive (alignment gated on magnetic) so
grid/angles keep the snapped fallback instead of the raw cursor.
- Painter application scope: node-derived (single/object/matching/room) from
the hovered node, cyclable via Shift, single-source HUD chip.
- Remove the redundant GridSnapControl from view-toggles (grid step lives in
the contextual HUD now).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two fixes for the split-view FPS cliff when moving a wall or opening:
- wall/move-tool: publish the live preview to useLiveNodeOverrides instead of
writing useScene.updateNodes every frame. The store's `nodes` ref no longer
churns per frame (which had re-rendered every useScene(s => s.nodes) subscriber
app-wide). Matches the existing 2D wall drag + 3D wall-system override pattern;
the final plan still commits atomically as one undoable change.
- floorplan-registry-layer: replace the single global siblingEpoch with a
per-node epoch bumped only for the nodes affected by the live drag (dragged
wall -> walls at its old + new junctions + child openings; door/window -> host
wall; gutter -> roof-peer gutters), unioned with the previous frame's live set
so a cancelled drag reverts. Dragging one wall/opening now rebuilds a handful
of geometries instead of all the level's walls + openings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Migrate `curvingWall`, `curvingFence`, `movingWallEndpoint`, `movingFenceEndpoint`
(and their setters) off `useEditor` onto the authoritative interaction scope.
The `reshaping` scope variant gains an `endpoint` discriminator; existence
checks read `useIsCurveReshape()` / `useEndpointReshape()`, and the few sites
that need the node (affordance-tool mounts, wall-vs-fence type checks) read it
from `useReshapingNode()` — a frozen drag-start snapshot, mirroring the old
flags so the tools' own per-frame writes don't feed back. `MovingWallEndpoint`
/ `MovingFenceEndpoint` move to the kind-owned tools that consume them.
`editor-api` is simpler: endpoint engagement is kind-agnostic, and the
`engageMove` reshape clears are gone (the scope is single-owner).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Migrate the two pure-mirror interaction flags off `useEditor` onto the
authoritative `useInteractionScope`. Both carried payloads byte-identical to
the scope union, so this is a zero-behaviour-change refactor: readers use the
reference-stable `useEditingHole()` / `useActiveHandleDrag()` hooks (or the
`getEditingHole()` imperative read), and producers drive the scope directly
with guarded `endIf` so clearing one interaction never stomps an unrelated
scope. Adds the `holeEditScope` builder + a no-leaked-flag invariant test.
Closes the first slice of the legacy-flag deletion; the rich-payload flags
(movingNode, curving*, *Endpoint, placementDragMode) remain.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Implements plans/editor-placement-interaction-overhaul.md: an authoritative
interaction-scope state machine plus the catalogued placement/interaction
fixes, and split-view floor-plan performance.
- Interaction-scope spine (lib/interaction/* + store/use-interaction-scope),
driven from central useEditor setters; overlay scoping (zone labels,
context badges, floating action menu) reads resolveOverlayPolicy.
- Bug tracks A/B/D/E/F/G/H: handle/cutout raycast, footprint validity,
auto-slab loop, ceiling hosting, B-key tool desync, 2D drop offset,
per-frame jank.
- Snapping modes (grid/lines/angles/off) + contextual HUD chips; modifier
model (Shift=cycle, Alt=free place, Ctrl=grid step).
- Item move now tracks the cursor 1:1 (was a laggy per-frame lerp); handle
rig hides during a whole-node move; rotate gizmo advertises Shift=free
rotation in the HUD and hides the move cross while rotating.
- Floor-plan perf: pause live reactivity while in 3D-only view; per-node
geometry cache so only changed nodes rebuild on a drag; hoist wall miters
to a once-per-pass ctx.levelData (O(N^2) -> O(N) on wall/opening drags).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Add roof surface placement support for items
Items (e.g. solar panels) can now be placed on sloped roof surfaces.
The placement system computes euler rotation from the roof surface
normal so items sit flush on the slope instead of going inside.
- Add roofStrategy to placement-strategies with enter/move/click/leave
- Wire roof:enter/move/click/leave events in the placement coordinator
- Add calculateRoofRotation in placement-math using surface normals
- Support full 3D cursor rotation for sloped surfaces
- Items on roofs are parented to the level with world-space rotation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fixed conflict
* feat(duct): ceiling-snap drawing + connected-joint endpoint move
Duct draw tool's ceiling mode now hangs each path point just below the
ceiling actually covering it (per-room heights tracked), with a
translucent surface highlight and a plumb line to the floor so the
in-flight point reads clearly from any angle.
Dragging a duct corner that sits on a fitting now carries the fitting's
other ducts along (port-connectivity second hop), so the joint moves
together instead of tearing apart.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): detach + vertical modifiers for duct/pipe joint editing
Alt detaches a dragged duct/pipe endpoint or fitting from its connected
joint (no elbow re-aim, no connectivity follow); Ctrl/Cmd drives vertical
riser movement on the fitting move. Behavioral parity across 2D and 3D.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): full DWV pipe parity for joint editing
Bring pipe-segment endpoint drags and pipe-fitting moves to parity with
duct: free-drag endpoints, Alt-detach, Ctrl/Cmd-vertical riser, elbow
re-aim, and connectivity follow. Generalizes the shared elbow-reaim and
auto-fitting helpers to dispatch by run kind so 2D and 3D share one path.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): wall-style arrow handles for duct fittings + segments
Add violet directional arrow affordances to duct-fitting selection (height,
move cross, rotate arc) mirroring the duct-segment rig: portaled into the
parent frame to stay out of the selection outline, rendered via the shared
HandleArrow, and carrying mated-run connectivity through the single-undo
dance. The move cross engages press-drag-release (placementDragMode) the same
way the floating drag does, so the markup hit-areas go inert and the fitting
move tool commits on pointer-up.
Also re-export the HandleArrow primitives from @pascal-app/editor and extend
the duct-segment side-move/floorplan affordances.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): click-to-latch cube handles for duct + fitting editing
Replace the hover-reveal / multi-handle selection rigs with a single
click-to-latch cube that opens a directional cluster, shared between
duct segments and fittings via a new selection-handles module
(HandleCube / MoveChevron / RotateArc, all sized to the roof pitch cube).
- Duct segment: per-vertex + run-center cubes reveal axis-locked move
chevrons (down arrow always shown), plus a roll arc at the run center.
- Duct fitting: center cube reveals six ±XYZ move arrows and three
per-axis rotation arcs (oriented in place), replacing the old
height/move/rotate trio with axis-cycling.
- Rotation (fitting arcs + duct roll) snaps to 45° steps; Shift = smooth.
- thin chevron profile + press-drag-release commit retained.
* fix(mep): orient duct roll arc consistently + drop Ctrl-vertical drag
Build a fully-determined basis for the duct roll gizmo so the curved
arrow always seats at the top-outer 45° corner regardless of run
direction, instead of an arbitrary apex from a single setFromUnitVectors.
The selection-rig ±Y arrows now own vertical movement, so the redundant
Ctrl-modifier riser drag is removed from the fitting move tool.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): run-aligned duct handles, swing snapping, elbow flatten
Align the duct run-center cube + horizontal arrows to the run axis
(matching the per-vertex handles) while keeping whole-run translate.
Endpoint side / up-down swing arrows now follow grid snap points and
port-snap onto nearby collars (Shift sweeps smoothly). Relax elbow
realign + fitting schemas to flatten to a straight 0° coupling. Surface
HVAC-specific hints in the select-mode helper panel for duct / fitting.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): per-segment linesets/liquid-lines with joint-follow editing
Linesets and liquid lines now commit one independent two-point node per
drawn segment instead of folding into a single mitered polyline, so each
line selects and deletes on its own. Endpoint caps fill shared-coordinate
joints so connected segments still read as continuous pipe.
Dragging a shared endpoint carries mated segments along via port
connectivity (Alt detaches), so a run still edits as one welded piece.
Liquid-line follow mode traces the whole connected lineset run, laying a
per-segment parallel line down its full assembled length.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): vertical-offset auto-routing on duct center-cube ±Y drag
Lifting/lowering a connected run with the run-center cube now keeps each
connected end welded to its stationary partner instead of dragging the
whole network. Run-to-run ends get the classic S/Z offset (two elbows +
plumb riser, partner trimmed back one leg); elbow-connected ends form a
clean L — the existing elbow stays put and re-aims its collar vertical,
with one new top elbow + riser reconnecting to the lifted endpoint. The
offset is ghosted live and minted as a single undo step on release.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Add roof accessory placement guides
Measure roof accessory placement against the active roof face using visible surface bounds and preview geometry footprints. Add dormer-local guides and special linear handling for ridge vents and gutters.
* Improve duct and placement routing
* Fix duct vertical movement routing
* Fix duct vertical offsets and roof accessory movement
* Add DWV movement parity and line endpoint controls
* Fix MEP handle review issues
* Fix chimney placement and duct offset cleanup
* Use snapped targets for roof accessory commits
* fix(nodes): repair MEP movement review issues
- auto-fitting: tee branch now follows the drawn lateral angle; update the
stale square-tee test + doc comment that contradicted the rewrite
- duct-segment: re-enable the vertical auto-offset rewind (the disabled stub
left mintedIds empty, so re-dragging a tagged duct stranded old elbows/risers
and stacked duplicates); remove the dead stub
- duct-segment: strip the stale auto-offset tag on manual corner/roll commits
so the horizontal-move path no longer trusts an out-of-date base
- chimney: resume history before mutating segment children arrays so a
cross-segment move reparents in one tracked transaction (undo stays consistent)
- dormer: align schema test with the new windowSill=false default
* fix: address mep movement review issues
* fix: address follow-up mep review comments
* fix: address additional mep review comments
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: pascal-open-bot <open@pascal.app>
Adds a `horizontal` fence style that builds composite-cladding panels —
horizontal boards stacked between square intermediate posts — instead of
the vertical pickets that slat/rail/privacy all produce today.
- New `style: 'horizontal'` (core schema + inspector Style control).
- Posts march along the whole span at `postSpacing`, each with a cap.
- New `postCap` control (none/flat/pyramid, default pyramid); pyramid
caps render as a 4-sided cone fence part.
- New `slatGap` control for the board reveal — 0 collapses to one flush
panel so the stacked-board seams don't read as lines.
- `postCap` + `slatGap` are horizontal-only (visibleIf); postCap uses a
labelled dropdown so its options aren't a context-free switch.
- Lower the `postSpacing` inspector minimum from 0.2 to 0.05 m.
- 2D floor plan reuses the solid-panel marker for horizontal.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Duplicating an item drops to the catalog placement flow, which rebuilds the
draft from the asset + transform and never carried node.slots — so the copy
lost every painted slot override. Thread slots through the draft create path:
useDraftNode.create seeds it onto the draft and commit() forwards it to the
final node, the placement coordinator passes it to its lazy wall/ceiling
draft creates, and the item move tool supplies node.slots for both the floor
(direct create) and wall/ceiling (coordinator) duplicate paths.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Slabs now expose two paintable faces instead of one: `surface` (top, keeps
the wood floor default and the prior slot id so painted slabs are
unaffected) and `side` (vertical walls + underside, default light grey).
The merged slab buffer is split by per-triangle face normal into a top mesh
and a side mesh, each tagged with its slot id for paint resolve/preview;
legacy whole-slab material maps onto the top only. Textures-off still
collapses to the floor role.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Custom-create now pre-creates a scene material and opens its inline editor
in the build pane (no separate right-side PaintPanel, which is removed);
the brush + "Paint with" use a scene: ref so painting stores the ref and
edits propagate everywhere. Slot preview (shared + item) resolves scene
refs so hover shows the real material.
Material properties editor uses the shared SliderControl for roughness/
metalness/opacity; row action buttons use Tooltip instead of title; the
color input renders as a clean filled swatch.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Retire the inline material fields on every slot-model kind, moving them
onto the unified node.slots model on load so painting, edit-propagation,
and the picker behave uniformly.
Walls: slots {interior,exterior}; slot-first viewer resolution threading
sceneMaterials (content folded into the wall material hash); WallRenderer
subscribes to the scene-material palette so a scene-material edit
re-renders live; wallPaint rebuilt on createSlotPaintCapability.
Load migration generalizes legacy -> slots across slab/ceiling (surface),
fence (posts/infill/base/rail), column (shaft/base/capital/frame), shelf
(shelves/frame/back), and stair (per-role tread/side/railing). Library/
scene refs pass through; inline customs mint a deduped scene material;
legacy fields cleared. No visual change (renderers already fell back to
the legacy fields). Roof/chimney/dormer/vents intentionally stay on their
role system.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Add 'concrete-drywall' (Prepared Drywall) catalog finish + 512 KTX2/webp
runtime assets; default walls (WALL_SLOT_DEFAULT interior+exterior) and the
roof wall/trim band to it so roofs read continuous with walls.
- fence: replace the 2-slot panel/rail split with 4 slots that match the panel's
build options — posts / infill (showInfill) / base (grounded only) / rail —
each its own mesh with userData.slotId; conditional slots track the build
state. Defaults: posts/infill/base charcoal, rail wood-finewood27.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- fence: split into two paint slots — panel (posts/base/infill, default charcoal)
and rail (cap, default wood-finewood27) — as separate meshes with userData.slotId.
Fix applyFenceUVs to continuous world-space 1 UV unit = 1 m (drop the per-part
min origin that broke tiling across parts). New generateFenceSlotGeometries.
- roof: real catalog defaults for the segment surfaces via getRoofMaterialArray
(the actual default path): wall/trim concrete-plate (matches walls), deck +
soffit soft-white, shingle terracotta; textures-off role escape hatch kept.
Align nodes getRoofMaterials no-parent fallback to match.
- stair: body slot default -> preset-lightgrey.
- (biome formatting normalization of the round-1 merged renderer files rides along.)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Elevator exposes four finish slots — cab / doors / shaft / glass (glass only
when shaft or door style is glass) — on node.slots. The finish materials now
resolve through a per-node material set (context provider) keyed on node.slots
+ scene materials: textures-off joinery role -> node.slots ref -> declared
default (cab preset-softwhite, doors metal-steel, shaft preset-lightgrey,
glass preset-glass), with glass transparency flags re-applied. Cab/door/shaft/
glass meshes tag userData.slotId; buttons, indicators, control panels, and
queue strips stay untagged (functional UI, not paintable). Interaction system
untouched. Monochrome unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Column exposes shaft / base / capital / frame slots on node.slots (base when
baseStyle!=none, capital when capitalStyle!=none, frame only for non-vertical
support styles). The single material context is widened to a per-slot map plus
a ColumnSlotContext; each part subtree is wrapped in <ColumnSlot> so every
mesh primitive resolves its material AND stamps userData.slotId from the same
context. Decorative shaft parts inherit shaft, base/capital carvings inherit
their parent slot. Resolution: textures-off wall role -> node.slots ref ->
legacy material/preset -> declared default (shaft/base/capital concrete-plaster,
frame metal-steel). Monochrome unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Stair exposes three paintable slots — treads / body / railing (railing only
when railingMode != none) — on node.slots. The 2-material-index body mesh
maps materialIndex 0->treads, 1->body via userData.slotIds; railing meshes
tag userData.slotId='railing'. Per-slot resolution layers over the viewer's
base body/railing materials only in textures-on mode: node.slots ref ->
legacy per-part field (preserved) -> declared default (treads wood-woodplank48,
body wood-woodfine2, railing metal-steel). A custom preview swaps the targeted
body material-array index and whole-mesh railing materials. Monochrome
unchanged. Stops using DEFAULT_STAIR_MATERIAL.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fence joins the node.slots paint model with one paintable 'surface' slot
(merged post/base/rail geometry is a single mesh). Resolution order matches
slab: textures-off joinery role -> node.slots.surface ref -> legacy inline
material/preset -> declared default (library:wood-finewood27). Tags the mesh
userData.slotId='surface' and wires capabilities.slots + paint. Stops
borrowing DEFAULT_STAIR_MATERIAL.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the flat #e5e5e5 placeholder on the roof shingle surface (material
index 3) with the catalog roof-weatheredshingles finish via
resolveSlotDefaultMaterial. Wall/trim, deck, and interior surfaces and the
textures-off role array are unchanged. Roof keeps its existing per-segment
role material system (no node.slots migration).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Builds on the explicit per-mesh slot tagging (currentDoorSlot/currentWindowSlot):
- Per-part painting: door = panel/frame/glass/hardware, window = frame/glass,
each independently paintable. The recessed door/window body sits behind the
wall, so the proud invisible cutout wins the scene raycast over the wall and
the shared resolveSlotByReRaycast() re-raycasts the kind's own subtree to pick
the exact part under the cursor (panel↔frame↔glass↔hardware). Hover tracks the
cursor via a re-eval (idempotent, no flicker).
- Door frame is its own slot (separate frameMaterial); hardware = new flat
'metal-chrome'.
- Library defaults (generic): panel/frame -> library:preset-softwhite, glass ->
library:preset-glass (flipped preset-glass to FrontSide — DoubleSide poisons
the WebGPU MRT pass; it's the only glass we use).
- Catalog: add flat (non-PBR) 'metal-chrome' + 'metal-brass'; drop metal
metalness 1 -> 0.6 so metals are lit by existing lights (no env needed).
- World-scale UVs (1 unit = 1m) on door/window box meshes via shared box-uv.ts,
so finishes tile at real-world scale instead of stretching.
- PaintResolveArgs gains an optional for subtree re-raycasting.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The editor's /icons assets were ~10MB of oversized PNGs (a single
toolbar icon up to 1.4MB). Convert every non-PWA icon to WebP (quality
92) and repoint all /icons/*.png references to .webp across
packages/editor, packages/nodes, and apps/editor. PWA/platform icons
(apple-touch-icon, icon-192, icon-512) stay PNG.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Windows and doors build all visuals in their viewer systems from module-global
materials, so this threads per-node slot materials + userData.slotId tags
through those builders without restructuring them:
- window: 'frame' + 'glass' slots. door: 'panel' (body = casing + leaf) +
'glass'; the opening reveal keeps its own material.
- Each system captures per-frame viewer state, then updateWindow/DoorMesh points
the builder-facing base/glass materials at the node's resolved slot override
(recomputed per node, so the next node resets without a restore). Meshes are
auto-tagged in the shared addBox/addShape helpers by which material they got.
- Textures-off still collapses to the role material (escape hatch); a slot
override only applies in colored mode.
- Editing a referenced scene material re-dirties the window/door (these systems
aren't covered by GeometrySystem's scene-material re-dirty).
- New paint capabilities (resolve role from userData.slotId, preview by
userData.slotId) + capabilities.slots; window/door dropped from the paint
disabled list. Shared previewSlotByUserData helper.
Defaults unchanged: unpainted windows/doors render exactly as before (the slot
fallback is the existing frame/glass material), so no visual regression.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
