bbe0e2b0b52fb3d6d820b96377e4d667b9388e35
360
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
bbe0e2b0b5 |
feat(viewer): ?disable=draw — skip scene rendering for graph-only consumers (#482)
The headless bake worker renders on SwiftShader (CPU), where per-frame vertex/draw cost dominates the whole capture — but a bake only reads the built scene graph; the pixels are thrown away. `?disable=draw` (same diagnostic-param family as postFx) renders an EMPTY scene each frame instead of the real one: useFrame systems and scene-ready keep ticking, per-frame cost collapses to a 64x64 clear. Rendering nothing at all does NOT work: with zero submitted frames Chromium's no-damage scheduler throttles rAF to exactly 1Hz (measured), starving the very systems the bake needs — hence the empty-scene draw. Measured on the office scene (200+ items) with a real GPU: capture 45.0s -> 8.4s (settle 37.6s -> 4.5s); output equivalent to a normal render (structural GLB diff clean; the ±13-accessor variance exists between normal runs too). CPU-only (worker) numbers via the prod-image container against a preview deploy. Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
feeabf4bd3 |
fix(items): retry failed model loads, settle skipped items, keep exports clean (#480)
* fix(items): retry failed model loads, settle skipped items, keep exports clean A transient storage failure (observed: Supabase 504s under the bake page's ~200-concurrent-request burst) permanently broke an item for the whole session: drei's useGLTF caches the rejected load by URL, the per-item ErrorBoundary swallowed it, and the red debug-box fallback was BAKED into the exported GLB (observed in a prod artifact). Meanwhile ItemSystem cleared the dirty mark at group registration — before the model resolved — so scene-ready could fire while GLBs were still loading, risking exported placeholder geometry. - ModelWithRetry: bounded retries (1s/3s) that clear the useGLTF cache entry and re-mount via the boundary's new resetKey. The timer is owned by an effect keyed on the failure count, so StrictMode's synthetic unmount/remount re-arms it instead of silently discarding it (the naive onError-scheduled timer died exactly that way in dev). - Exhausted retries settle the item as SKIPPED: the debug box renders nothing during exports, and the failure lands in useViewer.itemLoadFailures (nodeId -> url) so a bake host can persist which items are missing from the artifact. - ItemSystem holds the dirty mark until the item settles (model mounted, terminally failed, or never expected) — scene-ready now genuinely waits for item content; loading placeholders also hide during exports. - ErrorBoundary: onError + resetKey props. Verified against a 200+-item prod scene locally: permanent 504 -> exactly 3 fetch attempts, bake completes without the item and without debug boxes; 504-once -> retry heals, artifact byte-equivalent to the intact run; no-failure runs unchanged (demo_1 byte-identical). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(items): reset retry budget + settled flag when the asset URL changes Bugbot: after a terminal load failure, swapping the item's model kept the stale failures/epoch state and the settled flag — the new URL never even attempted to load. ModelWithRetry is now keyed by asset src (clean retry budget per URL) and un-settles the item on mount so the replacement load is awaited by ItemSystem/scene-ready too. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
717c2c5c0a |
fix: bug pass — legacy window crash, plant exports, zone snapping/visibility, HDR (#473)
* fix(core): apply window schema defaults on scene load Windows saved before a schema field existed (columnRatios/rowRatios/ frameThickness/…) loaded with those fields missing; the window mesh builder reads them unconditionally and threw every frame, crashing the viewer on legacy scenes. Zod-parse windows on load like doors so the schema defaults land. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): mount plant geometry during client GLB/STL/OBJ export The client export never set isExporting, so instanced kinds (trees/ flowers/grass) kept their colorWrite:false raycast collider mounted and exported it as an opaque white box, while the real geometry (which only mounts while exporting) was never captured. Reuse BakeExporter's flag + frame-wait dance in ExportManager, and harden isRenderableMesh to drop colorWrite:false materials from exports entirely. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): route zone drawing through the shared surface snap The zone tool quantized later vertices by distance along a free ray instead of snapping to the grid, and never joined the magnetic wall-corner/midpoint/crossing + alignment-guide pipeline that walls, slabs and ceilings use. Give zone the slab treatment in the 3D tool and both 2D floorplan branches (move + click + double-click commit). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(viewer): self-host the scene environment HDR drei's preset="sunset" fetches venice_sunset_1k.hdr from raw.githack.com, which intermittently fails ("Could not load venice_sunset_1k.hdr: Failed to fetch"). Point Environment at /hdri/venice_sunset_1k.hdr and ship the file in the app's public/ — same mirroring convention as /audios/sfx; consuming apps must carry the file too. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(editor): unmount zones entirely outside the zones layer Zone labels showed in every editing mode (visual noise), and each zone kept a drei <Html> mounted at opacity 0 — an <Html> costs per-frame matrix work and live DOM even when invisible. A new viewer presentation flag (showZones, default true) lets the editor unmount zone meshes and labels whenever the structure layer isn't 'zones' (and during snapshot capture); the registered group stays so zones keep their scene identity for selection and GLB export. Preview / first-person / viewer surfaces are untouched. Raycast-disable moved from a one-shot group flag to per-frame on the meshes, which now remount on layer toggles. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
51fddc2d9c |
fix: capture-mode polish for studio & presets + pausable render loop (#469)
* fix(editor): keep snapshot pitch out of preset thumbnail capture The capture overlay's snapshot hint and 'Take snapshot' shutter label rendered in every capture variant, clashing with the save-as-preset flow's own 'Frame your item — click Capture' banner. Gate them on the existing isPreset discriminator and label the shutter 'Capture' there. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(viewer): renderPaused flag suspends the frame loop Hosts that fully cover the canvas (e.g. the studio gallery overlay) can set renderPaused to stop FrameLimiter's RAF loop — a heavy animated scene otherwise keeps starving the GPU behind the overlay and makes it stutter. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): drop the crop/format HUD in preset capture The pills crowded the save-as-preset banner and repeat what the fixed square frame already shows. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): no contextual shortcut hints in the studio workspace Holding Shift surfaced select-mode/snapping hints over the studio compose panel and gallery, where there is no scene selection or tool to act on. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
f6a58489b8 |
fix(viewer): survive block-misaligned KTX2 textures on WebGPU (#467)
WebGPU rejects block-compressed textures whose base dimensions aren't multiples of 4; three's KTX2Loader only warns and transcodes anyway, so a baked GLB carrying one odd-sized user-item texture (e.g. 299x399) poisoned every render pass — endless 'Invalid BindGroup … Invalid CommandBuffer' spam. Route such payloads through a fallback transcode to uncompressed RGBA32 and repackage the pixels as a plain DataTexture (three's WebGPU upload path crashes on a CompressedTexture holding rgba8 data). Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
f6ffb93a39 |
fix(export): unbreak bakes and STL/OBJ exports on malformed/placeholder meshes (#466)
- roof-system: replace BoxGeometry placeholders (initial swap + empty-roof merged shell) with a group-less degenerate geometry — a Box's 6 groups against the roof's 4-material array crashed GLTFExporter on every scene with a segment-less roof node (prod: 'reading isShaderMaterial'), and count-0 groups crash MeshBVH's packed-tree build. - glb-export: sanitizeMaterialGroups pass repairs any mesh whose geometry groups don't line up with its material array before GLTFExporter runs. - export-manager: give neutralised (attribute-less) meshes an empty position attribute before STL/OBJ export — both exporters read position.count unconditionally. - bake-exporter: log the full error stack so the bake worker's console relay captures it in the job's error trail. - viewer: host-controlled disablePostFx prop (Viewer → PostProcessing) that skips building the SSGI/denoise pipeline entirely; the ?disable=postFx URL flag previously only bypassed it per-frame while still allocating it. Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
22af31dea8 |
editor: snapping overhaul — shared-wall rooms, deterministic slab elevation, cursor-true transfers (#458)
* fix(snapping): show alignment lines in all modes, snap only in lines; north export; R/T hint; grid default - Alignment guides display in every snapping mode (grid/lines/angles/off); magnetic pull applies only in 'lines'. New isAlignmentGuideActive() predicate decouples guide display from the snap delta across all placement/move/draw producers (item, wall, fence, slab/ceiling/roof, column/shelf/spawn, door/ window, MEP, 2D floorplan drafting, surface snap). - Floorplan PDF export now rotates to north-up (FLOORPLAN_VIEW_ROTATION_DEG - building rotation), matching the on-screen aligned-to-north view. - Item placement rotate hint collapsed to a single 'R / T Rotate' row. - Default item snapping mode changed lines -> grid. * feat(walls): detect rooms across shared walls + tight connect-snap in all modes Room detection: planarize the wall graph before face-finding — split straight walls at T-junctions where another wall ends mid-span, so a room closed against the middle of an existing wall is detected, not just isolated 4-wall rooms. Auto-close: wire the wall builder's "Room (auto-close)" to the same room graph via wallClosesRoom(), so drafting stops when a segment seals a room against the existing structure — not only when the chain returns to its own start. Connectivity snap: add a tight wall-connect snap (WALL_CONNECT_SNAP_RADIUS 0.05) that also runs in grid/off/angles — within range of a wall (body or corner, uniform radius) the endpoint sticks onto it and the beacon shows, so rooms close in every mode. Lines keeps its wider magnetic radii. Gate alignment guides in non-magnetic modes to the same connect distance so a corner dot no longer magnetises the cursor from far. Tests: cover T-junction detection + wallClosesRoom; update the item-default and wall-split tests for the mode-driven behaviour. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(surfaces): gate alignment guides to connect distance in non-magnetic modes Port the wall drafting/endpoint gating to the shared slab/ceiling/roof snap (resolveSurfacePlanPointSnap): in grid/off/angles, only anchors within the connect distance are fed to the alignment resolver, so guides form to nearby points and far corner dots stop lighting up from across the plan. Filtering the candidates (local-frame, like the cursor) rather than the resolved guides avoids the floor-plan view rotation baked into the guide coords. Lines mode keeps the full-range guides; the surface wall connect-snap is unaffected. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(slabs): deterministic wall-slab overlap via clipped overlap length Wall elevation used ray-cast point samples that landed exactly on the slab boundary for perpendicular walls, so whether a butting wall followed the slab's elevation depended on which side of the slab it touched. Clip the wall centerline and face lines against the polygon and require >=5cm of on/inside length instead: walls along the slab edge follow it on every side, point contact never does. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(grid): lift lattice 1mm off slab tops; wall-align on wall-item move start The horizontal snap lattice sat exactly at the followed surface Y, so it z-fought elevated slab tops while moving items. The visual mesh now rides 1mm above; the grid event plane keeps the true height. Moving a wall-hosted item showed a horizontal grid until the first pointer move published a wall surface — the mesh fallback assumed UP. Derive the host wall normal from the item mesh's world orientation (local +Z faces out of the wall) so the lattice is wall-aligned from the first frame. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(editor): unify selection shortcuts + truthful select-mode hints Shift+click now toggles selection membership in 3D like Cmd/Ctrl (and appends on box-select release), matching the 2D floorplan. The HUD rows describe what actually works in both views: move is plain left-drag (the grip/dot), the two vague selection rows collapse into one Cmd/Shift or-group, and the modifier-held variants (freely / with guides / bypass snaps) are gone — guides follow the snapping mode now. Key pills join with + for combos and / for alternatives; Shift renders as the shift icon. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): group gizmos — reliable rotate grabs, mutual hide, snapping-mode integration The group-rotate gizmo never received pointer events through the shared invisible hit-area path (EDITOR_LAYER + custom raycast) in its portalled context; its handlers now live on the visible arrow plus a plain default-layer invisible torus, so hover and drag work with a fat target. Group drags begin a handle-drag scope: each gizmo hides while its sibling drags (the frozen corner goes stale), idle hints leave the HUD, and the drag gets contextual hints — Shift free-rotation for rotate, the snapping chips for move. Group move joins the snapping-mode system via the 'item' context: Shift cycles the mode, Ctrl the grid step (both read live mid-drag), and 'lines' runs the same Figma-style alignment as single-node moves against the group's bbox anchors. Chip clicks now tick like the keyboard cycles. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): group-move ticks in every snapping mode Mirror the single-node move's sfx: emit per delta change rather than only on grid crossings, so lines/off get the same rate-limited texture. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(items): keep host transfers glued to the cursor Moving between hosts used to diverge from the pointer and mangle state: - Grab offsets: every surface anchor (wall / ceiling / shelf / item surface / floor) preserved the grab offset by re-seeding from the item's carried-over position on each new host, landing it far from the cursor. The grab offset now survives only on the original host and only until the item anchors anywhere else — after that every host (the original included) centers the item under the cursor. Applied uniformly to the placement coordinator and the window/door move tools. - Rotation: detaching from a rotated shelf/table back to the floor kept the HOST-local yaw as the level yaw, visibly spinning the item. The detach now re-expresses the item's world yaw in the level frame. - Elevation: the same detach wrote the level parentId to the store but not the draft ref, so the floor-elevation resolver bailed on its parent-must-be-a-level guard — the snap grid and the item stopped following slab elevations for the rest of the drag. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(items): latch grab-offset forgetting across every host kind Review follow-up (PR #458): unify the per-surface grab-forget rule into one grabForgotten latch. A wall/ceiling item could not actually reach a shelf or the floor (item-surface enter rejects attachTo assets), but a wall item CAN anchor on a roof face — and returning to its original wall then restored the stale grab offset. Roof-wall transitions (and floor landings after a host visit) now trip the latch in the coordinator and the window/door move tools alike. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
5c071ecad5 |
feat(plugins): plugin contract + first-party Nature pack (trees/flowers/grass) (#457)
* feat(plugins): trees tracer-bullet plugin + minimal host panel surface
Ship one real first-party plugin and only the host surface it forces
into existence, proving the plugin contribution paths every future
plugin (mint.gg generator, Home Assistant, environments, room volume)
will reuse.
Host surface (core + editor):
- core: Plugin.panels + observable panelRegistry; loadPlugin routes
panels (namespaced by plugin id, dup-throws like nodes).
- editor: AppSidebar merges panelRegistry into the icon rail via
useSyncExternalStore; each plugin panel lazy-loaded behind an error
boundary; host extraPanels keep precedence.
- editor: widen Tool to `KnownTool | (string & {})` so plugin tool ids
(e.g. 'trees:tree') typecheck; dispatch already registry-first.
Trees plugin (packages/plugin-trees), structurally a third-party pack
(peer-deps on @pascal-app/*):
- trees:tree node — procedural low-poly geometry (oak/pine/birch/palm),
free parametric inspector (preset/height/seed + Randomize), placement
tool + ghost preview built from public primitives only.
- presets rail panel — panel -> plugin store -> def.tool -> SceneApi ->
scene -> reactive read-back ("N planted").
Loading + docs:
- apps/editor: setPluginDiscovery([treesPlugin]) in bootstrap;
transpilePackages + dep.
- wiki/architecture/plugin-authoring.md: panels field, error-boundary
contract, styling, tool-from-panel note.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugins): merge plugin panels into the v2 sidebar layout too
The community shell renders <Editor layoutVersion="v2" sidebarTabs={...}>,
a separate rail from AppSidebar. Merge registry panels into the v2
tabMap + tab bar (and thus mobile) so plugin panels show up there as
well, not only in the v1 AppSidebar.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugin-trees): ez-tree geometry + instanced rendering + snapping
Replace the placeholder low-poly geometry with dgreenheck/ez-tree
(self-contained — bark/leaf textures inlined as base64, no assets to
host) and render the forest with true GPU instancing.
Rendering:
- def.system (system.tsx): one collective renderer that groups every
trees:tree node by (preset, seed) variant and draws each variant as
one InstancedMesh per ez-tree sub-mesh, composing the parent level's
world matrix into per-instance matrices. ~1 draw call per variant.
- def.renderer (proxy-renderer.tsx): an invisible, raycastable per-node
proxy so the host's existing selection / outline / zone machinery
keeps working — no instanceId bookkeeping. (Outline highlights the
proxy bbox; documented.)
- geometry per variant generated once by ez-tree and cached; seeds drawn
from a bounded pool so trees actually share variants.
Presets remapped to ez-tree built-ins (oak/pine/aspen/ash/bush).
Placement now respects the active snap mode — isGridSnapActive() +
gridSnapStep + snapPointToGrid, like the built-in item/shelf tools.
transpilePackages += @dgreenheck/ez-tree in the editor app.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugin-trees): true-silhouette hover/select + richer presets panel
Selection/hover now outlines the real tree shape, not the bbox. The
proxy splits into an outer group (stable invisible box collider +
pointer handlers, the raycast target) and an inner registered group that
mounts the real ez-tree geometry (invisible, non-raycasting) only while
the node is hovered or selected. The host outline pass reads the
registered inner group, so it traces the true silhouette; picking stays
on the steady box. Geometry for the highlight reuses the cached variant.
Panel: redesigned cards with gradient swatches + selected state, a
"planted" count chip, and a height slider that seeds the next tree's
height (a per-instance scale — never touches placed trees or instancing).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugin-trees): curated tree params + procedural flowers (sibling kind)
Tree params: expose foliageDensity, trunkThickness, and a leafless toggle
in the inspector and the panel brush. Each is folded into the instancing
variant key and mapped onto ez-tree options (radius scale, leaf count),
so editing one tree only re-buckets that tree — instancing degrades
gracefully, never worse than per-node.
Flowers: add a `trees:flower` sibling kind — simple procedural geometry
(stem + petals + center, merged per material), presets daisy / tulip /
lavender, instanced + selectable exactly like trees.
Refactor: extract the instanced renderer + selection proxy into a generic
`instanced.tsx` (InstancedKindSystem + KindProxy) and the snap/level/grid
placement wiring into `placement.tsx` (usePlacement). Trees and flowers
are now thin bindings — the template for future plant kinds.
Panel: a Trees / Flowers toggle, gradient preset cards, per-kind planted
count, and brush sliders.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugin-trees): native inspector controls in panel + preset thumbnails + ez-tree credit
- swap the panel's custom slider/checkbox/toggle for the host's exported
SliderControl/ToggleControl/SegmentedControl so the brush matches the
right-hand inspector pixel-for-pixel
- replaceable preset thumbnails (inline SVG data URIs, no asset hosting) render
as <img> cards instead of gradient swatches
- credit footer linking @dgreenheck/ez-tree (Daniel Greenheck, MIT)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): all ez-tree presets + type + leaf/branch colours, flower petal colour, grass kind
- tree presets now cover all of ez-tree's built-ins via species × size
(Small/Medium/Large + Bush 1/2/3 + Trellis), plus a Deciduous/Evergreen type
- edit-only leaf & branch colour tints (leaves.tint / bark.tint), all folded
into the instancing variant key
- flowers gain a per-flower petal colour (baked from preset at placement)
- new trees:grass instanced kind — procedural blade tufts (meadow/fescue/reed)
with a per-tuft blade colour, reusing the generic instanced + placement core
- panel: Trees/Flowers/Grass segmented switch, size + type controls, native
host controls throughout; credit links Daniel Greenheck's X
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): tolerate nodes persisted before new fields existed
treeSpecOf/flowerPetalColor now default every geometry field, and hexToInt
guards undefined — trees/flowers placed before size/type/colour fields were
added load with neutral defaults instead of crashing the instanced renderer.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): shared always-on wind + pin credits to panel bottom
- wind.ts injects a sway into each material's begin_vertex driven by one shared
uTime uniform (advanced per frame in the instanced system); USE_INSTANCING
guards keep the same material valid for the non-instanced placement ghost.
Applied to tree, flower, and grass materials — a whole scene sways like ez-tree.
- credits footer is now sticky to the bottom of the panel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): rename rail panel Trees -> Nature (covers trees/flowers/grass)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): rename panel header Plant -> Nature to match the rail
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat: bake-exportable instanced plants + renderer-agnostic wind
Bake (GLB export): add a transient useViewer.isExporting flag. BakeExporter
flips it, waits for the commit, then exports. KindProxy watches it and, during
export, emits each plant's REAL visible geometry under scene-renderer (which the
exporter clones) instead of the invisible collider — so instanced kinds
(def.system) that live outside that subtree are captured. The collider box is
dropped during export so it doesn't bake as a phantom solid.
Wind: the previous onBeforeCompile wind was a no-op under the editor's WebGPU
renderer (WebGL-only hook). Replace it with a renderer-agnostic per-instance
base-pivot tilt animated in useFrame (which FrameLimiter drives continuously).
Reads as wind under any renderer; removes the dead wind.ts + applyWind calls.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): TSL vertex-bend wind (WebGPU), replacing CPU tilt
wind-node.ts adds a TSL positionNode that bends each plant proportional to
height above its base, phased per-instance (instanceIndex) and per-vertex, so
tips sway and roots stay planted — animated on the GPU via the renderer's time
node. ez-tree is untouched: its materials are copied into MeshStandardNodeMaterial
(toWindMaterial); flowers/grass build node materials directly (windStandardMaterial).
Instance matrices go back to static.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): tree materials render black under wind (Phong not Standard)
ez-tree's bark/leaves are MeshPhongMaterial; copying them into a
MeshStandardNodeMaterial swapped the shading model (specular/shininess ->
roughness/metalness) and rendered black. Convert into the matching node
material type (Phong->Phong, Lambert->Lambert, else Standard) so map/color/
alphaTest/side are preserved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): trees still black — build node material from map/color explicitly
Material.copy() doesn't transfer a classic material's map/color onto a node
material, so textured trees rendered black (flowers/grass were fine — they carry
no map). Re-create the ez-tree materials as MeshStandardNodeMaterial with map,
alphaMap, color, side, alphaTest passed explicitly in the constructor — the same
proven path the flower/grass materials use.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): tree wind — per-leaf flutter (ez-tree style), static trunk
The whole-tree height-based bend was a rigid rotation about the base ('rotating
in place'). Replicate ez-tree's actual approach: scale sway by the leaf card's
uv.y and apply it ONLY to the 'leaves' material (multi-frequency wave, phased per
instance + per leaf) so leaves flutter from their attachment while bark/branches
stay static. Flowers/grass keep the gentle whole-plant stem bend.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugins): Plugin.onSceneLoad hook + viewer application; trees wind via it
Adds a broad, plugin-declared post-load scene hook so effects survive GLB export:
- core: Plugin.onSceneLoad (lazy, three-free) + observable sceneHookRegistry + loadPlugin routing.
- viewer: applyPluginSceneHooks util; PluginSceneHooksSystem re-runs it on the live
scene as nodes change; GlbScene runs it on each loaded baked GLB.
- plugin-trees: declare onSceneLoad; wind is no longer welded into the materials —
the hook re-attaches LEAF_FLUTTER/STEM_BEND by material name (leaves / flower-* /
grass-*), so it now animates in the baked /viewer too, not just live.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): scale-invariant leaf wind (÷ modelScale) so baked GLB matches editor
The bake's quantiser renormalises each plant mesh to [-1,1] and moves real size
into a large node scale (~3 on trees). LEAF_FLUTTER added a constant local offset,
so in the baked GLB it was multiplied by that scale → ~3x over-swing. Divide the
sway by modelScale.x to keep a constant world-space amplitude; editor (scale 1)
is unchanged, baked now matches.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* revert: onSceneLoad wind approach → back to wind-in-materials
Reverts the Plugin.onSceneLoad hook + viewer application + modelScale compensation
(commits 893ca839, 6c9ee003). Superseded by the bake-policy 'replace' model
(plans/editor-plugin-trees-example.md Part D): trees render live in the viewer via
their own path, so wind is a plain positionNode on the material again — no hook,
no baked-geometry decoration, no coordinate-space fights.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(bake): per-kind bake policy (static/strip/replace)
Adds NodeDefinition.bake ('static' default | 'strip' | 'replace') + registry
helpers bakePolicyOf/kindsWithBakePolicy in core. Generalises the previously
hardcoded scan/guide handling:
- glb-export strips kinds with bake==='strip' from the artifact (was a
scan/guide type check); 'replace' kinds stay baked (portable static snapshot).
- glb-reference-nodes selects rebuild candidates by policy instead of type.
- scan/guide declare bake:'strip'; trees/flower/grass declare bake:'replace'.
Viewer-side 'replace' swap (strip baked meshes + live-rebuild) is the next slice.
Part of plans/editor-plugin-trees-example.md Part D.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(bake): viewer 'replace' swap — hide baked meshes, re-render live
Adds NodeDefinition.bakeReplaceRenderer (falls back to renderer). The baked
/viewer now, for kinds with bake:'replace' and a loaded plugin:
- hides the static baked meshes (bakePolicyOf(kind)==='replace') in GlbScene's
identity pass — capability-gated, so with no plugin the meshes stay;
- re-renders each node live via buildGlbReplaceNodes + the shared portal-into-
baked-level path (GlbReferenceNode now prefers bakeReplaceRenderer), so trees
ride level stacking automatically and wind runs in real coordinate space.
plugin-trees ships a hookless KindStatic (real geometry + wind materials, no
collider/selection) and per-kind static-renderer binds; tree/flower/grass point
bakeReplaceRenderer at them. Completes plans/editor-plugin-trees-example.md Part D.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* perf(viewer): memoize GlbReferenceNode(s) — skip forest re-render on camera move
GlbScene re-renders per frame during camera movement (hover raycast / walkthrough
HUD). The rebuilt nodes reconciled every frame — fine for 1-2 scans/guides, but a
bake:'replace' forest puts dozens of nodes here (profiler: KindStatic x56 6ms,
GlbReferenceNode x57 4ms per frame). memo at the node boundary skips the whole
subtree (incl. the plugin renderer) when (node, anchor) are unchanged; both props
are stable refs, so it short-circuits cleanly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* perf(plugin-trees): NO_RAYCAST on KindStatic meshes — cheap hover over a forest
The baked scene's <primitive> has pointer handlers, so R3F recursively raycasts
every descendant on each pointer move (incl. orbit drags). The live replace trees
had fully-raycastable dense ez-tree geometry, so hover cost ~400ms/frame over a
forest (profiler: 'JavaScript' 413ms during camera move). They carry no pascalId
(a hit resolves to the level, not the tree), so they're scenery, not pick targets
— mirror KindProxy, which already NO_RAYCASTs its real geometry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* refactor(bake): viewer 'replace' renders instanced per level (was per-node)
Replaces the per-node KindStatic viewer path with a collective instanced one,
mirroring the editor's system instead of diverging from it:
- extract InstancedNodes from InstancedKindSystem (shared by both) with a
localSpace flag: editor folds parent world matrix (root instances); viewer uses
level-local matrices + NO_RAYCAST, portaled into the baked level.
- bakeReplaceRenderer is now a collective renderer (BakeReplaceRenderer<N>,
receives {nodes}); GlbReplaceInstances groups replace nodes by (level, kind) and
portals each kind's instanced renderer into that baked level. GlbReferenceNode
reverts to per-node renderer (strip kinds only).
Fixes: forest hover cost (100+ tree meshes → a few instanced draws, R3F walks far
fewer objects) and per-tree wind phase (instanceIndex varies again; per-node
KindStatic gave every tree phase 0 → unison sway). Trees still ride level stacking
(portaled) and stay static in a plain glTF viewer.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* perf(viewer): BVH the baked scene — accelerate hover/pick raycasts
The baked /viewer runs with useBvh={false}, so GlbScene's hover/pick raycasts
against the baked building were brute-force triangle intersection (profiler:
_computeIntersections + intersectTriangle ~30%). The parametric viewer wraps its
scene in <SceneBvh>; the baked one never did. SceneBvh's effect is one-shot on
mount and can't catch the async-loaded GLB, so compute a per-mesh BVH inside
GlbScene keyed on gltf.scene instead. 'replace' instances are NO_RAYCAST, so the
raycast===Mesh.prototype.raycast guard skips them (mirrors SceneBvh).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): inherit ez-tree preset by default (seed/type/tints)
Our node defaults (seed:1, treeType:deciduous, colors:#ffffff) were applied as
*overrides* on top of loadPreset, discarding each preset's tuned seed, growth
model, and tints — so our trees looked nothing like eztree.dev (pine grew
deciduous, foliage washed white, every silhouette off).
Mirror the flower petalColor pattern: seed/treeType/leafColor/branchColor are now
optional; generateTree only overrides an ez-tree option when the node set it,
otherwise loadPreset's value stands. Placement stores none of them (fresh tree =
pure preset; all same-preset trees share one instancing variant); the deciduous/
evergreen brush toggle is gone (growth model comes from the preset). The inspector
keeps them as per-tree overrides, and Randomize still varies the seed.
Verified against ez-tree: fresh Oak Medium → seed 35729 + preset tints; Pine
Medium → evergreen + seed 13977; overrides apply when set.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): bundle real preset artwork (webp, in-package)
Replaces the placeholder SVG thumbnails + lucide panel icon with the real nature
art. 13 webp (~126KB total, 256px cards / 128px icon) live in src/assets and are
imported via art.ts — both consumers are Next, so transpilePackages runs them
through the image pipeline (hashed, cached /_next/static/media URLs). No CDN, no
per-app public/ mirroring; the assets travel with the package.
- art.ts: central webp imports → TREE_ART / FLOWER_ART / GRASS_ART / NATURE_ICON
- presets/flower-presets/grass-presets: thumbnail ← bundled art (was *Thumbnail())
- index.ts: Nature panel icon ← NATURE_ICON (was lucide:leaf)
- assets.d.ts: ambient *.webp decl (no next type dep)
- remove thumbnails.ts (placeholder generators, now dead)
Verified on the running dev server: webp emitted + served (HTTP 200, image/webp).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): square preset cards on light-gray flattened thumbnails
Regenerate the 12 thumbnails with the transparency flattened onto gray-100
(#f3f4f6) and render the card square (aspect-square, was h-16 crop). The
nature-icon keeps its transparency for the icon rail.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): correct move-drag + outline behavior for instanced plants
Two selection defects, one root cause each:
1. Outline moved mirror-wise during a move drag. The host move tool drives the
registered Object3D imperatively with absolute level-local positions (and
mirrors them via useLiveTransforms) — the contract ParametricNodeRenderer
satisfies by putting position + registration on the same group. KindProxy
registered a child nested inside the transform-carrying group, so drag
positions landed in the node's rotated frame (placement gives every plant a
random Y rotation → deltas rotated up to 180°). Restructure: the registered
group now carries position/rotation (live-transform aware); the box collider
is a positioned sibling, staying out of the outline mask.
2. Outline froze while the mesh swayed. The outline mask pass renders with a
shared override material, so it can never follow the material positionNode
wind. Instead, while hovered/selected the collective system skips the node
and the proxy mounts the real geometry with static twins of the wind
materials (toStaticMaterial — explicit property transfer; node-material
clone() drops map/color). Outlined mesh == visible mesh, both still.
Bonus from the same restructure: a move drag now animates the actual plant in
realtime (the proxy is what the tool drives), not just the drag box.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(plugin-trees): 2D plan symbols + trunk-sized footprint
- def.floorplan for the three kinds — the registry floor-plan layer renders any
kind that provides one, so this is all plugin nodes need to appear in 2D.
Tree: dashed canopy ring (dashed = overhead element) in the preset swatch +
solid trunk dot; ring is pointer-events:stroke so the large disc doesn't
steal clicks from what's under the canopy. Flower/grass: small colour dots.
Selected → palette stroke + move-handle; hovered → hover stroke.
- Tree floorPlaced.footprint is trunk-sized (treeTrunkRadius) instead of
canopy-sized, so the move/placement drag box hugs where the tree actually
plants instead of spanning the crown. The invisible hover collider keeps its
larger radius — only the displayed box shrinks.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(plugin-trees): trunk-sized drag box, 45°-aligned rotation, rotate gizmo
- The move drag box ignored floorPlaced.footprint: with collides:false the tool
auto-measures the rendered mesh — which, since the selection swap-out, is the
whole canopy. Declare capabilities.dragBounds (trunk-sized, node-local) so the
box hugs the trunk and rotates with the node instead of wrapping the crown as
a world AABB.
- Placement wrote a fully random Y rotation, so the box/gizmo never sat on a 45°
step. Snap the random rotation to 45° increments (variety preserved, alignment
restored) and widen rotatable.snapAngles to 8×45° on all three kinds.
- Add the standard rotate gizmo (def.handles, shelf-style arc handle): ring
around the trunk near the ground — not the canopy, which would put the handle
meters out on a large oak.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(plugin-trees): live rotate preview + ground-level rotate ring
- KindProxy now folds useLiveNodeOverrides into its transform (mirrors
ParametricNodeRenderer) — the rotate/resize gizmos publish mid-drag patches
there, so the plant turns in realtime instead of snapping on commit. The
snap-on-commit (with the arc delta wrapping to ±180°) is also what made long
drags land 'the wrong way'; with live feedback the direction reads correctly
and matches the item gizmo pipeline exactly.
- Rotate ring drops from mid-trunk to 0.25m — a floor affordance like the item
gizmo, not a waist-height hoop.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(registry): panelForKind — 'find in catalog' opens a plugin kind's panel
loadPlugin now associates every node kind with its plugin's first (namespaced)
panel id; panelRegistry.panelForKind(kind) exposes it. A host's find-node
handler can open the right panel for any plugin kind with zero per-plugin
knowledge.
plugin-trees uses it end-to-end: a module-level selection:find-node listener
(find-sync.ts, imported by the manifest so it's live from plugin load) points
the panel store at the found node's section + preset — panel section state
moved from panel-local useState into the store to make it addressable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(registry): plugin panels declare their workspaces (default edit-only)
Plugin panels rode into the studio rail: the host swaps its own sidebar tabs by
workspaceMode, but usePluginPanels appended registry panels unconditionally.
PluginPanel gains workspaces?: readonly ('edit'|'studio')[] — manifest metadata,
default ['edit'] (an authoring panel has no business in the clean render
workspace; a plugin shipping studio tooling opts in explicitly). usePluginPanels
filters by the current workspaceMode, covering both the v1 AppSidebar and v2 tab
bar paths. Nature declares nothing and disappears from studio via the default;
the v2 layout's existing active-tab fallback handles a panel vanishing mid-use.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* docs: link plugin-authoring guide from README + CONTRIBUTING, fix stale wiki path
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(plugin-trees): keep ez-tree off the eager SSR path
ez-tree loads its inlined textures at module scope (needs document), so any
eager import chain reaching geometry.ts crashed Next prerender
(ReferenceError: document is not defined on /_not-found). Move the pure
helpers (mulberry32, naturalHeight) to variant-utils.ts so the
flower/grass builders and floorplan no longer pull ez-tree, and drop the
generateTree re-export from the package barrel (no external consumers).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
|
bf25af6add |
viewer: Fix Dutch roof trim artifacts (#452)
* Add roof surface placement support for items Items (e.g. solar panels) can now be placed on sloped roof surfaces. The placement system computes euler rotation from the roof surface normal so items sit flush on the slope instead of going inside. - Add roofStrategy to placement-strategies with enter/move/click/leave - Wire roof:enter/move/click/leave events in the placement coordinator - Add calculateRoofRotation in placement-math using surface normals - Support full 3D cursor rotation for sloped surfaces - Items on roofs are parented to the level with world-space rotation Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fixed conflict * Fix spiral stair openings and fence handle arrows * Implement roof trim planes and ridge vent clipping * Fix mansard roof and ridge vent placement * Fix mansard merged roof cutouts * Fix Dutch roof gable overhang * Refactor roof segment, ridge vent, and surface geometry Remove Dutch ridge axis abstraction and rework roof edit system, ridge vent clipping geometry, and roof surface placement. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Simplify Dutch roof shape * Add Dutch roof gable top geometry controls * Fix Dutch roof slope material slots * Render dutch roof tops as double-sided faces * Add auto ridge vent toggle to roof segments Track ridge vent auto-generation via an `autoRidgeVent` metadata flag so geometry changes only regenerate default vents when enabled, treating legacy segments with generated vents as auto-enabled for back-compat. Expose a panel toggle to opt in/out per segment. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Snap new walls to the floor below Feed the walls of the level directly beneath the active one into the draft snap pipeline as extra references, so a new wall can align with the floor below. They share the same local XZ origin, and the list is kept separate from the current-level walls so the measurement HUD and wall splitting only act on the active level. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Set Dutch roof shape defaults on type switch Seed the Dutch shape parameters (waist width/height/length, top rake thickness/length) with sensible defaults whenever a segment is created as or switched to Dutch, so the gablet is well-formed regardless of leftover values from the previous roof type. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Use green accent for corner and endpoint snap markers Color the corner/endpoint snap markers and the vertical cursor pillar green across the 2D floorplan beacon, the 3D alignment guide dots, and the wall snap beacon so snap targets read as a consistent accent. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Add magnetic wall snapping to the roof tool Snap roof draft corners onto wall corners, midpoints, crossings, and bodies on the active level and the floor below, reusing the wall tool's snap pipeline so the beacon and coloring match. The cursor's ground dot/ring is hidden while a wall snap is active to avoid overlapping the beacon glyph. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Update auto-generated Next.js route types path Regenerated next-env.d.ts now references ./.next/dev/types/routes.d.ts. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Show cutaway outline while dragging roof trim Slice an untrimmed segment volume generated from the live node instead of the registry mesh, whose CSG rebuild lags a few frames behind the drag and may still hold placeholder geometry — so the section outline now renders deterministically. Use LineBasicNodeMaterial so the outline draws under the WebGPU pipeline, and export generateRoofSegmentGeometry for the slice source. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Fill and clip roof trim cutaway, gate it to active drag Add a violet silhouette fill behind the cutaway outline, extend the section slicing to angled diagonal/corner trims via a generic vertical cut plane, and clip each slice to its footprint span so the infinite plane no longer sprouts stray lines across the rest of the roof. The cutaway now renders only while a trim handle is being dragged. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Separate and extend Dutch roof end slopes Pull the Dutch hip end slopes out of the watertight shingle shell into their own slab wedge so they can be reshaped independently, and extend each end slope inward up its own hip plane until the top edge meets the gablet's inner triangle. Refactor roof-segment shape geometry into a shared roof-segment-shape module. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Render roof trim cutaway as a material-only section cut Replace the triangle-mesh slicer with a CSG intersection of a thin slab against the untrimmed roof shell, so the cutaway shows red only on real material (wall + deck bands) and leaves the hollow attic empty. Add an analytic surface-edge outline, style both solid red like a SketchUp section, and make the cutaway persist whenever a segment is trimmed. Keep the merged roof shell visible during trim editing (re-trimmed live from each segment's drag override) instead of swapping in the per-segment meshes, whose abutting end-cap faces showed as stray white planes the commit never had. Extend each slab past free cut-line ends only — trimmed ends clamp to the cut line — so the red section stays inside the trim box. Re-export INTERSECTION from the viewer CSG surface for the editor. * Outline roof cutaway by fill silhouette, restyle to destructive red Derive the section-cut outline from the fill geometry's edges (EdgesGeometry) so it traces the real cut shape — wall/deck band boundaries and the hollow-attic edge — instead of just the top surface line. Drop the fill to 85% opacity and recolor both fill and outline to the app's destructive red, matching the delete/destructive UI. * Include roof accessories in trim clipping and red cutaway Roof accessories (chimney, vents, skylight, dormer, gutter, downspout, solar-panel, cupola) now slice at the trim plane like the roof shell and appear in the red section-cut while dragging a trim handle: - Export clipGeometryBySegmentTrim from the viewer as a reusable segment-local trim-clip primitive. - Add a shared useSegmentTrimClippedGeometry hook + TrimClippedMesh wrapper (nodes) that slice accessory geometry by the host segment's live trim override, so the cut tracks the drag. - Wire the clip into all 11 accessory renderers, including skylight glass panes and dormer window glass/frame/sill. - Feed every hosted accessory mesh into the editor's red cutaway, welding triangle-soup geometry (e.g. ridge vent) so CSG INTERSECTION yields a cross-section. - Register skylight in the scene-graph tree-node map so it shows in the outliner when placed on a roof. Co-Authored-By: Claude <noreply@anthropic.com> * Add smooth spline fences with editable curve handles Fences can now be drawn as one continuous Catmull-Rom/Bezier curve via an optional `path` (+ per-point `tangents`), selectable in a Straight/Curved mode toggle. Selected spline fences expose draggable control-point dots (hexagon) and symmetric tangent handles (circle) joined by a violet line, editable in both 2D plan and 3D. Side-move arrows are dropped for splines. Co-Authored-By: Claude <noreply@anthropic.com> * Fix dutch roof ridge vent handling * Fix Dutch ridge vent placement and support * Fix Dutch roof trim artifacts * Fix Dutch roof trim preview geometry * Tag roof trim overlay meshes with EDITOR_LAYER Child meshes relied on a parent group's layer, which three.js does not propagate, so the trim section/rail/plane overlays rendered on the scene layer — getting inked/SSGI-darkened and leaking into thumbnail exports. Co-Authored-By: Claude <noreply@anthropic.com> * Apply Biome cleanup * fix(core): address Dutch roof review feedback * chore: apply biome check cleanup * fix(core): relax Dutch roof surface helper input * fix * Fix biome checks and dev verification * fixes * Remove unsupported Biome noShadow override * Improve roof interactions and fence editing * Fix fence drag and ridge vent default handling * editor: drop wall-snap debug log, gate curved-fence finish hint on draft start Remove the leftover TEMP DIAGNOSTIC console.log in the wall tool's onMove hot path. Curved fences commit on a closing gesture (double-click / Enter) rather than per-click, so surface a 'Finish curve' hint in the fence HUD — but only once a point has been placed and a curve is actually in flight. The draft point count is published from SplineFenceDraft into a small ephemeral editor store (useFenceCurveDraft) that the contextual helper reads, mirroring the existing useSegmentDraftChain pattern. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: Wassim SAMAD <wass08@gmail.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
36132bbcea |
viewer: slow first-person walk/run/jump speeds
Walk 4→2 m/s, run 5.5→5 m/s, jump 6→5 (~1.27 m peak). Applied to both the GLB walkthrough controller (viewer) and the editor first-person controls so the two surfaces stay consistent. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMAD
|
db35af9a05 | Merge remote-tracking branch 'origin/main' into fix/bake-door-window-anims | ||
|
Wassim SAMADandClaude Opus 4.8
|
43fa2b1253 |
Merge origin/main into feat/placement-interaction-overhaul
Resolve 7 conflicts keeping our snapping migration + floorplan perf work as source of truth, combined with main's MEP run-continuation / Alt-detach / latch handles. Rebuilt two import blocks the auto-merge silently truncated (node-arrow-handles.tsx, duct-fitting/move-tool.tsx). Verified: tsc clean across core/viewer/editor/nodes/mcp, 451 tests pass, biome clean. Floorplan view-transform re-render storm confirmed pre-existing (not introduced by this merge). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
70acf894d1 |
feat(viewer): widen first-person walkthrough FOV to 60°
The walkthrough rode the default 50° orbit camera, which feels cramped on foot. Both walkthrough controllers (baked GlbWalkthroughController and the parametric WalkthroughControls fallback) now set a shared WALKTHROUGH_FOV = 60 on enter and restore the prior FOV on exit, leaving orbit framing untouched. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
7530de5348 |
fix(viewer): bake folding/garage doors at an un-flipped rest pose
`poseDoorMovingParts` assigned a single euler axis (`group.rotation.y` / `.x`). The live system was fine because the group's euler stays a clean (0, y, 0). But the GLB exporter clones the door and decomposes its matrix, which re-derives a gimbal-flipped euler (x=z=π) for any rotation beyond ±90° — folding panels reach ~158°. The reset to t=0 then only zeroed `.y`, leaving the π residue on x/z and baking a 180°-flipped rest pose (panels folded out toward a wrong position even when closed). Set the full euler triple via `.set()` in every pose branch so the other two axes are always zeroed, clearing any decomposed residue. Add a regression test that exports an open folding door and asserts an identity rest pose for all panels. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
4c81435e3b |
fix(doors): correct folding fold direction + make open-clip names unique per node
Two issues surfaced testing the baked viewer:
- Folding door folded toward +z (into the room) — the joint rotation sign
was inverted, so the accordion opened the wrong way ("weird position").
Flip to `(prevDirection - direction) * foldAngle` so leaves fold toward
−z, matching the original inline rig. Verified panel-for-panel against the
original formula at every operationState.
- Openable clips were named by display name (`<name>: open`), but the baked
viewer drives playback by clip name (`useAnimations` maps name → action).
Several windows share the name "Window 1", so their clips collapsed to one
action and triggering any one opened the first. Key the clip name by node
id (`<id>: open`) — unique, matching the item-loop convention; the
human-readable name still lives in `extras.label`.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
Wassim SAMADandClaude Opus 4.8
|
c629171607 |
feat(doors): bake open-animation clips for sliding/garage/folding/pocket/barn doors
Only swing doors (hinged/double/french) baked an open clip into the GLB — they carry a `pascalSwingLeaf` marker the exporter reads. Every operation door type (sliding, pocket, barn, folding, garage-sectional/rollup/tiltup) baked its `operationState` straight into mesh vertex positions at build time, so the exporter had no re-poseable node to sample and the artifact never flagged them `openable`. Give operation doors the same build-once + pose-at-t split windows already use. Each builder now emits its moving parts in a named group at the CLOSED pose, and `poseDoorMovingParts` (the single source of truth, shared by the live system and the GLB exporter) drives the open motion: - sliding/pocket/barn: rigid leaf translation - garage-tiltup: rigid hinge about the lintel - folding: hinged accordion chain (nested groups, per-joint fold) - garage-sectional: per-panel groups posed along the overhead curve - garage-rollup: the one type whose live geometry changes (slats roll onto a drum, which a glTF clip can't express) keeps its full-detail live rebuild; the curtain is wrapped in a top-pivoted group the exporter scales up into the lintel as the baked approximation. The exporter samples each operation door's motion into keyframe tracks (16 segments) so the non-linear rigs (curve, accordion) stay faithful, and stamps `extras.openable` + `extras.clips` so any glTF consumer can play it. Tests: per-type kinematics (groups build, rest closed, open) + sliding/roll-up clip baking (sampled position/scale tracks). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Aymeric RabotandClaude Opus 4.8
|
1b4c656901 |
chore(ts7): adopt the TypeScript 7 native compiler (tsgo)
Make the editor packages compatible with, and benefit from, the native Go
compiler (TypeScript 7 / tsgo) while keeping the npm publish path on stable tsc.
- Add @typescript/native-preview (pinned 7.0.0-dev.20260624.1). tsgo coexists
with typescript@6, which Next typegen and the IDE plugin still need until the
TS 7.1 programmatic API ships.
- Fix two react-three-fiber JSX augmentations the native checker rejects but
tsc tolerated:
- viewer: map only LineBasicNodeMaterial (the one webgpu node material used as
a JSX tag) instead of the whole three/webgpu namespace (TS2320/TS2590).
- plane-box-select-tool: drop the redundant `IntrinsicElements extends
ThreeElements` block — it duplicated R3F's global augmentation and, by
referencing @react-three/fiber's ThreeElements directly, hit a bun peer-dep
variant-directory duplicate under tsgo (TS2320). r3f.d.ts already covers
those JSX intrinsics. Types-only — no runtime change.
- check-types -> tsgo --noEmit (editor, @repo/ui, editor app, ifc-converter app)
- emit-package dev watch -> tsgo --build --watch
- build/publish stay tsc --build (prepublishOnly + release.yml unchanged;
emitted .d.ts is byte-identical to tsc output)
- bump next 16.2.6 -> 16.2.9
tsc remains the source of truth and fallback. Published artifacts unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
Wassim SAMADandClaude Opus 4.8
|
b7386f2dcb |
fix(viewer): block body for zone-shape forEach (useIterableCallbackReturn)
Main's biome config flags a callback returning a value; the ternary in the zone-shape forEach implicitly returned moveTo/lineTo. Use a block body. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMAD
|
708fa5278e |
Merge remote-tracking branch 'origin/main' into feat/baked-glb-export
# Conflicts: # packages/editor/src/components/editor/export-manager.tsx |
||
|
Wassim SAMADandClaude Opus 4.8
|
636f8ed4f7 |
style(viewer): wrap three import in glb-interactive (formatter)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
5938cb6805 |
feat(viewer): strip scans/guides from the bake, re-add from scene data
Scans (LiDAR meshes) and guides (floorplan images) are heavy reference assets stored elsewhere, not part of the compiled building — and baking them into a public static GLB would also bypass the per-project show_*_public flags. Strip both from the export entirely (previously they leaked in as empty identity nodes, timing-dependent). The GLB viewer re-adds them at runtime from the scene graph, like lights: GlbReferenceNodes resolves each scan/guide's registry renderer (no static nodes import — same nodeRegistry path the viewer already uses) and portals it into its parent level's baked node, so the node's level-local transform resolves to the right world pose and rides level stacking. Uses the same GuideRenderer/ ScanRenderer + asset resolver as the parametric viewer, so http-backed assets show for everyone and local asset:// ones for the owner — exact parity. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
df901b1d4e |
perf(viewer): keep GLB light pool at a fixed visible count (no WebGPU recompiles)
Toggling pointLight.visible changes the active-light count, which makes the WebGPU renderer rebuild every material's lighting node + pipeline — a multi- hundred-ms stall. The pool reassigns on every camera move, so zooming churned visibility and tanked FPS. Keep all 12 pool lights permanently visible and animate only intensity (an idle light lerps to 0); the light-set never changes, so no recompiles. Also make reassignment O(n) (score lookup map, not find). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
a5c08b5950 |
feat(viewer): pool GLB item lights + stop overlay click propagation
Match the parametric ItemLightSystem instead of mounting a light per item: a fixed pool of point lights is assigned to the nearest/most-visible lit items each tick (camera-proximity scored, hysteresis, level factor), snapped to each item's world position + offset, and faded on reassignment — so a large house doesn't blow the renderer's light budget. The controls overlay already mounts its <Html> only while the item sits in the focused zone (not hide/show); add stopPropagation on the overlay so toggling a control no longer bubbles to the canvas and deselects the zone. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
0514ec1858 |
feat(bake): bake catalog item clips (fan spin) into the GLB + play in viewer
A catalog GLB ships its own animation clips (a ceiling fan's spin), but those clips aren't in the editor scene graph, so the bake couldn't see them. Add an `itemClipRegistry` (core, type-only three) that the item renderer fills with the resolved clip per node while the scene is live; the GLB export reads it and re-emits each item's clip onto the baked subtree, rebinding tracks to the cloned spinning node's uuid. Catalog node names repeat across instances and the glTF roundtrip rebinds by name, so the targeted node is uniquified per item (`<id>__lamp_018`) — every fan animates independently. The baked viewer plays these as looping ambient motion: `<id>: loop` clips are set to LoopRepeat (not the door/window LoopOnce) and GlbItemAnimation drives them off each item's toggle (lit/spinning by default). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
d80ffd67d5 |
feat(viewer): re-light + re-control baked GLBs from the scene graph
Add a GLB interactive layer (`GlbInteractive`) that re-creates the item interactivity the parametric viewer has — point lights and the controls overlay — on top of a baked artifact. Effects + controls come from the DB scene graph (joined to baked nodes by `pascalId`, no sidecar); world transforms come from the baked Object3Ds. Lights are portaled into their item node so they ride level stacking, and intensity tracks the shared `useInteractive` store so overlay dimming works. Baked scenes load "lit" (toggles default on) for a showcase viewer feel. Extract `ControlWidget` into its own module so the parametric `InteractiveSystem` and the GLB overlay render identical controls. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
0e55d86416 |
fix(viewer): keep ceiling-hosted items visible in dollhouse
Items mounted on a ceiling (lamps, fans, recessed lights) are child nodes of the ceiling, so hiding the whole occluder node hid them too. Hide only the ceiling/roof's own meshes (stop descending at nested identity nodes) so hosted items stay visible when a floor is opened up. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
5fe0965297 |
fix(viewer): graceful fallback when WebGPU/WebGL is unavailable (#403)
Adds a capability check and an UnsupportedGpuViewerFallback so the viewer renders an informative panel instead of crashing on environments that expose neither WebGPU nor WebGL. Capability detection runs post-mount to stay hydration-safe, the renderer-init failure path swaps to the fallback, and the fallback signals scene-readiness so the host editor loader does not hang. Reworked from #403 (anton-pascal) onto current main; resolves the import conflict and the SSR/scene-ready gotchas surfaced in review. Co-authored-by: Open Pascal <open@pascal.app> |
||
|
Wassim SAMADandClaude Opus 4.8
|
5aedc366a6 |
feat(viewer): GLB walkthrough in viewer, monochrome, spawn/export polish
Move the first-person walkthrough into @pascal-app/viewer (BVHEcctrl + GlbWalkthroughController) and round out the GLB-consuming viewer: - Walkthrough: fallback ground only on level 0 (upper floors rely on baked slabs), hidden spawn marker, auto pointer-lock on enter, single-Esc exit via pointerlockchange, force perspective on enter / restore on exit. - GlbScene: monochrome strips baked textures and recolours meshes by surface role using the active theme's clay tints; spawn node hidden from render. - glb-export: camera/label/spawn identity extras for the viewer. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
6cfc6ae01b |
fix(export): stamp openable only when an open clip bakes
A door/window only carries extras.openable + extras.clips when an open animation actually bakes. Cased openings (no leaf) and fixed windows (no operable sash) are no longer mislabelled openable, so the GLB never claims a part opens when nothing moves. /viewer is unaffected (it already required openable && clips). Adds a regression test for the no-clip case. (Export barrels reordered by the formatter.) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
c8bd29e909 |
revert(viewer): drop distance-based LOD switching from GLB scene
Reverts the LOD switching (
|
||
|
Wassim SAMADandClaude Opus 4.8
|
0469b25639 |
feat(viewer): distance-based LOD switching in GLB scene
GlbScene accepts an optional lodUrls list and swaps rendered detail by camera distance to the building's world-space center: lod0 (interactive — identity, selection, zones, clips all bind here) for normal + building-view distances, simpler visual-only levels only past ~2.5R / ~8R. Single-URL callers are unchanged. useGLTFKTX2 now accepts a URL array. Manual visibility toggling rather than THREE.LOD: THREE.LOD measures distance to its own origin (0,0,0), which mis-selected levels (blanking the scene) when the baked geometry is offset from the origin. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
0a7cbd2081 |
feat(viewer): GLB-consuming /viewer path (baked-glb-export phase 2)
Add `GlbScene` — the viewer that renders a baked GLB artifact with no parametric scene graph, and finish the phase-1 export contract it consumes. Viewer (packages/viewer): - GlbScene: loads the artifact, drives a building → level → zone → node drill hierarchy on useViewer.selection. Room/zone picking resolves from the floor plane (ray ∩ floor + point-in-polygon), node picking uses a footprint test, so walls/ceilings/zone-helpers never skew or block selection. Level modes (stacked/exploded/solo), dollhouse (hide a focused floor's ceilings + roof so rooms are visible and pickable), reconstructed zone floor fills + gradient edge borders + room labels (faded, hover-brightened), baked door/window open clips, click-outside / empty-space deselect, and the shared outline post-FX. Exported as GlbScene/GlbLevel/GlbIdentity/GlbHover. - post-processing: composite the zone-pass tint into the base scene so rooms show whether or not SSGI is enabled (previously only added in the SSGI branch). Export contract (packages/editor/src/lib/glb-export.ts): - Convert WebGPU NodeMaterials to classic glTF-standard materials; decompress KTX2 maps via WebGPUTextureUtils so GLTFExporter can embed them. - Stamp name + extras identity (pascalId/kind/label/openable/clips), bake door/window open clips (loop:false), strip editor overlays (off-layer + invisible-material hitboxes) so cutouts aren't plugged. - Fix opaque-but-flagged-transparent materials (no spurious alphaMode=BLEND) and BackSide → FrontSide + winding flip (glTF has no back-face-only). - Force levels + zones visible and stamp level display names + zone polygons so every floor bakes and /viewer can reconstruct rooms and label the breadcrumb. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
f773e6b8c5 |
feat(editor): placement & interaction overhaul — FSM spine, bug tracks, perf
Implements plans/editor-placement-interaction-overhaul.md: an authoritative interaction-scope state machine plus the catalogued placement/interaction fixes, and split-view floor-plan performance. - Interaction-scope spine (lib/interaction/* + store/use-interaction-scope), driven from central useEditor setters; overlay scoping (zone labels, context badges, floating action menu) reads resolveOverlayPolicy. - Bug tracks A/B/D/E/F/G/H: handle/cutout raycast, footprint validity, auto-slab loop, ceiling hosting, B-key tool desync, 2D drop offset, per-frame jank. - Snapping modes (grid/lines/angles/off) + contextual HUD chips; modifier model (Shift=cycle, Alt=free place, Ctrl=grid step). - Item move now tracks the cursor 1:1 (was a laggy per-frame lerp); handle rig hides during a whole-node move; rotate gizmo advertises Shift=free rotation in the HUD and hides the move cross while rotating. - Floor-plan perf: pause live reactivity while in 3D-only view; per-node geometry cache so only changed nodes rebuild on a drag; hoist wall miters to a once-per-pass ctx.levelData (O(N^2) -> O(N) on wall/opening drags). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
a71de82ccb |
nodes: add MEP movement controls and DWV parity (#438)
* Add roof surface placement support for items Items (e.g. solar panels) can now be placed on sloped roof surfaces. The placement system computes euler rotation from the roof surface normal so items sit flush on the slope instead of going inside. - Add roofStrategy to placement-strategies with enter/move/click/leave - Wire roof:enter/move/click/leave events in the placement coordinator - Add calculateRoofRotation in placement-math using surface normals - Support full 3D cursor rotation for sloped surfaces - Items on roofs are parented to the level with world-space rotation Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fixed conflict * feat(duct): ceiling-snap drawing + connected-joint endpoint move Duct draw tool's ceiling mode now hangs each path point just below the ceiling actually covering it (per-room heights tracked), with a translucent surface highlight and a plumb line to the floor so the in-flight point reads clearly from any angle. Dragging a duct corner that sits on a fitting now carries the fitting's other ducts along (port-connectivity second hop), so the joint moves together instead of tearing apart. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): detach + vertical modifiers for duct/pipe joint editing Alt detaches a dragged duct/pipe endpoint or fitting from its connected joint (no elbow re-aim, no connectivity follow); Ctrl/Cmd drives vertical riser movement on the fitting move. Behavioral parity across 2D and 3D. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): full DWV pipe parity for joint editing Bring pipe-segment endpoint drags and pipe-fitting moves to parity with duct: free-drag endpoints, Alt-detach, Ctrl/Cmd-vertical riser, elbow re-aim, and connectivity follow. Generalizes the shared elbow-reaim and auto-fitting helpers to dispatch by run kind so 2D and 3D share one path. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): wall-style arrow handles for duct fittings + segments Add violet directional arrow affordances to duct-fitting selection (height, move cross, rotate arc) mirroring the duct-segment rig: portaled into the parent frame to stay out of the selection outline, rendered via the shared HandleArrow, and carrying mated-run connectivity through the single-undo dance. The move cross engages press-drag-release (placementDragMode) the same way the floating drag does, so the markup hit-areas go inert and the fitting move tool commits on pointer-up. Also re-export the HandleArrow primitives from @pascal-app/editor and extend the duct-segment side-move/floorplan affordances. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): click-to-latch cube handles for duct + fitting editing Replace the hover-reveal / multi-handle selection rigs with a single click-to-latch cube that opens a directional cluster, shared between duct segments and fittings via a new selection-handles module (HandleCube / MoveChevron / RotateArc, all sized to the roof pitch cube). - Duct segment: per-vertex + run-center cubes reveal axis-locked move chevrons (down arrow always shown), plus a roll arc at the run center. - Duct fitting: center cube reveals six ±XYZ move arrows and three per-axis rotation arcs (oriented in place), replacing the old height/move/rotate trio with axis-cycling. - Rotation (fitting arcs + duct roll) snaps to 45° steps; Shift = smooth. - thin chevron profile + press-drag-release commit retained. * fix(mep): orient duct roll arc consistently + drop Ctrl-vertical drag Build a fully-determined basis for the duct roll gizmo so the curved arrow always seats at the top-outer 45° corner regardless of run direction, instead of an arbitrary apex from a single setFromUnitVectors. The selection-rig ±Y arrows now own vertical movement, so the redundant Ctrl-modifier riser drag is removed from the fitting move tool. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): run-aligned duct handles, swing snapping, elbow flatten Align the duct run-center cube + horizontal arrows to the run axis (matching the per-vertex handles) while keeping whole-run translate. Endpoint side / up-down swing arrows now follow grid snap points and port-snap onto nearby collars (Shift sweeps smoothly). Relax elbow realign + fitting schemas to flatten to a straight 0° coupling. Surface HVAC-specific hints in the select-mode helper panel for duct / fitting. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): per-segment linesets/liquid-lines with joint-follow editing Linesets and liquid lines now commit one independent two-point node per drawn segment instead of folding into a single mitered polyline, so each line selects and deletes on its own. Endpoint caps fill shared-coordinate joints so connected segments still read as continuous pipe. Dragging a shared endpoint carries mated segments along via port connectivity (Alt detaches), so a run still edits as one welded piece. Liquid-line follow mode traces the whole connected lineset run, laying a per-segment parallel line down its full assembled length. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): vertical-offset auto-routing on duct center-cube ±Y drag Lifting/lowering a connected run with the run-center cube now keeps each connected end welded to its stationary partner instead of dragging the whole network. Run-to-run ends get the classic S/Z offset (two elbows + plumb riser, partner trimmed back one leg); elbow-connected ends form a clean L — the existing elbow stays put and re-aims its collar vertical, with one new top elbow + riser reconnecting to the lifted endpoint. The offset is ghosted live and minted as a single undo step on release. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Add roof accessory placement guides Measure roof accessory placement against the active roof face using visible surface bounds and preview geometry footprints. Add dormer-local guides and special linear handling for ridge vents and gutters. * Improve duct and placement routing * Fix duct vertical movement routing * Fix duct vertical offsets and roof accessory movement * Add DWV movement parity and line endpoint controls * Fix MEP handle review issues * Fix chimney placement and duct offset cleanup * Use snapped targets for roof accessory commits * fix(nodes): repair MEP movement review issues - auto-fitting: tee branch now follows the drawn lateral angle; update the stale square-tee test + doc comment that contradicted the rewrite - duct-segment: re-enable the vertical auto-offset rewind (the disabled stub left mintedIds empty, so re-dragging a tagged duct stranded old elbows/risers and stacked duplicates); remove the dead stub - duct-segment: strip the stale auto-offset tag on manual corner/roll commits so the horizontal-move path no longer trusts an out-of-date base - chimney: resume history before mutating segment children arrays so a cross-segment move reparents in one tracked transaction (undo stays consistent) - dormer: align schema test with the new windowSill=false default * fix: address mep movement review issues * fix: address follow-up mep review comments * fix: address additional mep review comments --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: pascal-open-bot <open@pascal.app> |
||
|
Wassim SAMADandClaude Opus 4.8
|
06e4cd7748 |
feat(export): baked GLB export with identity, clips, cutout fix (phases 0-1)
Promote the client GLB export into the baked-artifact format from
plans/editor-baked-glb-export.md (phases 0 and 1).
- NodeMaterial -> classic MeshStandardMaterial conversion at export. The
viewer's MeshStandard/LambertNodeMaterial set isNodeMaterial, not
isMeshStandardMaterial, so GLTFExporter would otherwise drop every
surface to a blank default. KTX2 (compressed) maps are decompressed via
WebGPUTextureUtils so the exporter can embed them (PNG for now; KTX2
re-encode is deferred to the phase-3 bake worker).
- Identity stamping from sceneRegistry: node.name = pascalId and
extras = { pascalId, kind, label?, openable?, clips? }; all other
userData stripped so editor/runtime ephemera never reach glTF extras.
- Door/window open clips baked from the build-once + pose-at-t primitives
(door pascalSwingLeaf marker, window poseWindowMovingParts). Clips named
by label ("Door 1: open"), carry extras.loop = false (consumers play
once and hold; dumb glTF players still loop).
- Cutout fix: door/window selection hitboxes hide via material.visible,
which onlyVisible misses, so the hitbox box plugged the wall opening.
Non-renderable container meshes now keep their node but lose geometry;
childless ones are removed.
- Editor-overlay stripping mirrors the thumbnail capture: emit
thumbnail:before/after-capture so scene-layer affordances (handles,
ceiling/site brackets) self-hide, and drop anything off SCENE_LAYER
(gizmos, grid, zone fills).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
Wassim SAMADandClaude Opus 4.8
|
8633886eef |
fix(selection): selected objects keep their texture (light glow, no wash)
Selecting a textured wall/slab/item replaced its surface with a flat purple wash. Root cause: the selection highlight clones the material and tints it, but `NodeMaterial.clone()` on the WebGPU backend drops the texture-map node assignments, so the clone rendered flat — and a strong albedo blend + emissive washed whatever was left. Fix: re-attach the maps from the source material after cloning (shared by reference) and drop the albedo tint, keeping only a gentle indigo emissive so the real material/texture stays readable with a soft "selected" glow. Applied to both highlight paths: - generic editor highlight (slabs/items) in selection-manager - wall path (walls are excluded from the generic one), built lazily + cached/self-healing so it survives the wall finish's async texture load Removes the now-dead eager wall `highlightedVisible`/`selection` profile. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
346b5d8cbe |
feat(fence): add horizontal-board fence style with capped posts
Adds a `horizontal` fence style that builds composite-cladding panels — horizontal boards stacked between square intermediate posts — instead of the vertical pickets that slat/rail/privacy all produce today. - New `style: 'horizontal'` (core schema + inspector Style control). - Posts march along the whole span at `postSpacing`, each with a cap. - New `postCap` control (none/flat/pyramid, default pyramid); pyramid caps render as a 4-sided cone fence part. - New `slatGap` control for the board reveal — 0 collapses to one flush panel so the stacked-board seams don't read as lines. - `postCap` + `slatGap` are horizontal-only (visibleIf); postCap uses a labelled dropdown so its options aren't a context-free switch. - Lower the `postSpacing` inspector minimum from 0.2 to 0.05 m. - 2D floor plan reuses the solid-panel marker for horizontal. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMAD
|
c4b6e74d65 |
Merge remote-tracking branch 'origin/main' into feat/paint-slots
# Conflicts: # packages/core/src/store/use-scene.ts # packages/editor/src/components/editor/index.tsx |
||
|
Wassim SAMADandClaude Opus 4.8
|
c6423e7c73 |
feat(paint-slots): migrate wall + procedural kinds onto node.slots
Retire the inline material fields on every slot-model kind, moving them
onto the unified node.slots model on load so painting, edit-propagation,
and the picker behave uniformly.
Walls: slots {interior,exterior}; slot-first viewer resolution threading
sceneMaterials (content folded into the wall material hash); WallRenderer
subscribes to the scene-material palette so a scene-material edit
re-renders live; wallPaint rebuilt on createSlotPaintCapability.
Load migration generalizes legacy -> slots across slab/ceiling (surface),
fence (posts/infill/base/rail), column (shaft/base/capital/frame), shelf
(shelves/frame/back), and stair (per-role tread/side/railing). Library/
scene refs pass through; inline customs mint a deduped scene material;
legacy fields cleared. No visual change (renderers already fell back to
the legacy fields). Roof/chimney/dormer/vents intentionally stay on their
role system.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
Wassim SAMADandClaude Opus 4.8
|
faf73d66f2 |
feat(paint-slots): full world-space UVs for roof gable walls (match walls)
The earlier gable fix world-referenced only V, leaving U in segment-local space — so gable and wall lined up vertically but slid horizontally. Replace the V-only scalar offset with the segment's full world matrix (roof group composed with segment transform) and project vertical faces exactly like the wall kind: U = ±worldX/Z, V = 1 - worldY. Gable now tiles continuously into the walls in both axes. Sloped shingle UVs are unchanged. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
65a7fcb74b |
feat(paint-slots): world-space planar UVs for walls (seamless tiling)
Walls used THREE's ExtrudeGeometry UVs, which restart at each wall's local start/end — so finishes seamed at wall joins, showed a mid-face axis-switch stripe, and didn't line up with the roof gable. Re-project the render mesh's UVs in WORLD space (1 unit = 1 m), matching roof-system's pushRoofUv exactly: vertical faces U = ±worldX/Z, V = 1 - worldY. De-indexes so each triangle uses its own face normal (no edge seams). Applied only to the render mesh; collision and floorplan geometry keep the original UVs. Now walls tile continuously across segments and meet the gable seamlessly. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
c7d0cd3388 |
feat(paint-slots): world-reference roof gable wall UVs to align with walls
The gable wall band tiled its V in segment-local space, so its texture phase didn't line up with the wall below (whose ExtrudeGeometry UVs map V = 1 - height-from-base). Make vertical roof faces tile V in world space (V = 1 - worldY) via the segment's resolved world Y (parent roof + segment position), so the band matches a ground-floor wall's vertical tiling at the eave seam. U is unchanged (stays in the face's local run). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
0e8df1b946 |
fix(paint-slots): nudge fence vertical members 0.001m thinner than the rails
The posts/infill and the accent rail shared the same panelDepth*0.35 depth, so their faces were coplanar where they cross -> z-fighting. Make the verticals 0.001m shy so the rail wins the depth test cleanly. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
f7e774485c |
fix(paint-slots): guard empty fence slot group before mergeGeometries
mergeGeometries throws on an empty array, so an absent slot group (infill with showInfill off, base on a floating fence) crashed the geometry build. Return an empty BufferGeometry for an empty group; the renderer already skips meshes with no position attribute. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
bba0cc5f68 |
feat(paint-slots): prepared-drywall finish + fence 4 slots matching build options
- Add 'concrete-drywall' (Prepared Drywall) catalog finish + 512 KTX2/webp runtime assets; default walls (WALL_SLOT_DEFAULT interior+exterior) and the roof wall/trim band to it so roofs read continuous with walls. - fence: replace the 2-slot panel/rail split with 4 slots that match the panel's build options — posts / infill (showInfill) / base (grounded only) / rail — each its own mesh with userData.slotId; conditional slots track the build state. Defaults: posts/infill/base charcoal, rail wood-finewood27. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
e92ee05702 |
feat(paint-slots): round-2 feedback — fence 2 slots + UVs, roof defaults, stair body
- fence: split into two paint slots — panel (posts/base/infill, default charcoal) and rail (cap, default wood-finewood27) — as separate meshes with userData.slotId. Fix applyFenceUVs to continuous world-space 1 UV unit = 1 m (drop the per-part min origin that broke tiling across parts). New generateFenceSlotGeometries. - roof: real catalog defaults for the segment surfaces via getRoofMaterialArray (the actual default path): wall/trim concrete-plate (matches walls), deck + soffit soft-white, shingle terracotta; textures-off role escape hatch kept. Align nodes getRoofMaterials no-parent fallback to match. - stair: body slot default -> preset-lightgrey. - (biome formatting normalization of the round-1 merged renderer files rides along.) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
4818807360 |
refactor(paint-slots): share scene IBL as viewer SceneEnvironment
Replace the editor-only EditorEnvironment wrapper with a SceneEnvironment component exported from @pascal-app/viewer, mounted as an opt-in <Viewer> child (still not baked into the Viewer component). One source of truth the editor and the community public viewer both inject; embed/thumbnail surfaces simply don't mount it. Sunset preset at environmentIntensity 0.6. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
8aa179e9cb |
feat(paint-slots): per-part paint for windows + doors, chrome/brass, world-scale UVs
Builds on the explicit per-mesh slot tagging (currentDoorSlot/currentWindowSlot): - Per-part painting: door = panel/frame/glass/hardware, window = frame/glass, each independently paintable. The recessed door/window body sits behind the wall, so the proud invisible cutout wins the scene raycast over the wall and the shared resolveSlotByReRaycast() re-raycasts the kind's own subtree to pick the exact part under the cursor (panel↔frame↔glass↔hardware). Hover tracks the cursor via a re-eval (idempotent, no flicker). - Door frame is its own slot (separate frameMaterial); hardware = new flat 'metal-chrome'. - Library defaults (generic): panel/frame -> library:preset-softwhite, glass -> library:preset-glass (flipped preset-glass to FrontSide — DoubleSide poisons the WebGPU MRT pass; it's the only glass we use). - Catalog: add flat (non-PBR) 'metal-chrome' + 'metal-brass'; drop metal metalness 1 -> 0.6 so metals are lit by existing lights (no env needed). - World-scale UVs (1 unit = 1m) on door/window box meshes via shared box-uv.ts, so finishes tile at real-world scale instead of stretching. - PaintResolveArgs gains an optional for subtree re-raycasting. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
3cb37c98cd |
feat: embed surface — export in-canvas affordances + transparent/faint-ink viewer support
Lets a host mount the editor's real editing experience on a bare <Viewer> without the full <Editor> shell. editor: export Grid, NodeArrowHandles, MoveTool, ToolManager — the selection handles, the kind-owned mover, the build-tool host, and the drafting grid that feeds tools their grid:* pointer events. See the doc comment in index.tsx for how they cooperate with host camera controls and selection. viewer: two opt-in, non-persisted presentation flags (both default off, so the editor and every other consumer are unchanged): - transparentBackground / <Viewer transparent>: emit premultiplied RGBA masked by geometry + outline alpha (outputColorTransform off on that path) so the scene can float on any page background. ACES tone-mapping makes a true-white opaque background impossible, hence transparency. - inkOpacity: override the per-mode ink-edge opacity. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
c3bd065f2f |
fix(paint-slots): disable the CSG cutout's raycast so window/door paint hits the slots
The real interceptor was the 'cutout' mesh, not the hitbox: it's a 1m-deep CSG helper whose front face sits 0.5m proud of the glass, and current three.js raycasts invisible meshes — so every paint/hover ray resolved to 'cutout' (no slotId → role null). Disable its raycast; combined with the hitbox noop, paint/hover rays now land on the tagged frame/glass (panel/glass) children. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |