aec4aa2b5a346a4d3f40ff67bf5d3e19e304682d
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
a71de82ccb |
nodes: add MEP movement controls and DWV parity (#438)
* Add roof surface placement support for items Items (e.g. solar panels) can now be placed on sloped roof surfaces. The placement system computes euler rotation from the roof surface normal so items sit flush on the slope instead of going inside. - Add roofStrategy to placement-strategies with enter/move/click/leave - Wire roof:enter/move/click/leave events in the placement coordinator - Add calculateRoofRotation in placement-math using surface normals - Support full 3D cursor rotation for sloped surfaces - Items on roofs are parented to the level with world-space rotation Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fixed conflict * feat(duct): ceiling-snap drawing + connected-joint endpoint move Duct draw tool's ceiling mode now hangs each path point just below the ceiling actually covering it (per-room heights tracked), with a translucent surface highlight and a plumb line to the floor so the in-flight point reads clearly from any angle. Dragging a duct corner that sits on a fitting now carries the fitting's other ducts along (port-connectivity second hop), so the joint moves together instead of tearing apart. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): detach + vertical modifiers for duct/pipe joint editing Alt detaches a dragged duct/pipe endpoint or fitting from its connected joint (no elbow re-aim, no connectivity follow); Ctrl/Cmd drives vertical riser movement on the fitting move. Behavioral parity across 2D and 3D. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): full DWV pipe parity for joint editing Bring pipe-segment endpoint drags and pipe-fitting moves to parity with duct: free-drag endpoints, Alt-detach, Ctrl/Cmd-vertical riser, elbow re-aim, and connectivity follow. Generalizes the shared elbow-reaim and auto-fitting helpers to dispatch by run kind so 2D and 3D share one path. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): wall-style arrow handles for duct fittings + segments Add violet directional arrow affordances to duct-fitting selection (height, move cross, rotate arc) mirroring the duct-segment rig: portaled into the parent frame to stay out of the selection outline, rendered via the shared HandleArrow, and carrying mated-run connectivity through the single-undo dance. The move cross engages press-drag-release (placementDragMode) the same way the floating drag does, so the markup hit-areas go inert and the fitting move tool commits on pointer-up. Also re-export the HandleArrow primitives from @pascal-app/editor and extend the duct-segment side-move/floorplan affordances. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): click-to-latch cube handles for duct + fitting editing Replace the hover-reveal / multi-handle selection rigs with a single click-to-latch cube that opens a directional cluster, shared between duct segments and fittings via a new selection-handles module (HandleCube / MoveChevron / RotateArc, all sized to the roof pitch cube). - Duct segment: per-vertex + run-center cubes reveal axis-locked move chevrons (down arrow always shown), plus a roll arc at the run center. - Duct fitting: center cube reveals six ±XYZ move arrows and three per-axis rotation arcs (oriented in place), replacing the old height/move/rotate trio with axis-cycling. - Rotation (fitting arcs + duct roll) snaps to 45° steps; Shift = smooth. - thin chevron profile + press-drag-release commit retained. * fix(mep): orient duct roll arc consistently + drop Ctrl-vertical drag Build a fully-determined basis for the duct roll gizmo so the curved arrow always seats at the top-outer 45° corner regardless of run direction, instead of an arbitrary apex from a single setFromUnitVectors. The selection-rig ±Y arrows now own vertical movement, so the redundant Ctrl-modifier riser drag is removed from the fitting move tool. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): run-aligned duct handles, swing snapping, elbow flatten Align the duct run-center cube + horizontal arrows to the run axis (matching the per-vertex handles) while keeping whole-run translate. Endpoint side / up-down swing arrows now follow grid snap points and port-snap onto nearby collars (Shift sweeps smoothly). Relax elbow realign + fitting schemas to flatten to a straight 0° coupling. Surface HVAC-specific hints in the select-mode helper panel for duct / fitting. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): per-segment linesets/liquid-lines with joint-follow editing Linesets and liquid lines now commit one independent two-point node per drawn segment instead of folding into a single mitered polyline, so each line selects and deletes on its own. Endpoint caps fill shared-coordinate joints so connected segments still read as continuous pipe. Dragging a shared endpoint carries mated segments along via port connectivity (Alt detaches), so a run still edits as one welded piece. Liquid-line follow mode traces the whole connected lineset run, laying a per-segment parallel line down its full assembled length. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(mep): vertical-offset auto-routing on duct center-cube ±Y drag Lifting/lowering a connected run with the run-center cube now keeps each connected end welded to its stationary partner instead of dragging the whole network. Run-to-run ends get the classic S/Z offset (two elbows + plumb riser, partner trimmed back one leg); elbow-connected ends form a clean L — the existing elbow stays put and re-aims its collar vertical, with one new top elbow + riser reconnecting to the lifted endpoint. The offset is ghosted live and minted as a single undo step on release. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Add roof accessory placement guides Measure roof accessory placement against the active roof face using visible surface bounds and preview geometry footprints. Add dormer-local guides and special linear handling for ridge vents and gutters. * Improve duct and placement routing * Fix duct vertical movement routing * Fix duct vertical offsets and roof accessory movement * Add DWV movement parity and line endpoint controls * Fix MEP handle review issues * Fix chimney placement and duct offset cleanup * Use snapped targets for roof accessory commits * fix(nodes): repair MEP movement review issues - auto-fitting: tee branch now follows the drawn lateral angle; update the stale square-tee test + doc comment that contradicted the rewrite - duct-segment: re-enable the vertical auto-offset rewind (the disabled stub left mintedIds empty, so re-dragging a tagged duct stranded old elbows/risers and stacked duplicates); remove the dead stub - duct-segment: strip the stale auto-offset tag on manual corner/roll commits so the horizontal-move path no longer trusts an out-of-date base - chimney: resume history before mutating segment children arrays so a cross-segment move reparents in one tracked transaction (undo stays consistent) - dormer: align schema test with the new windowSill=false default * fix: address mep movement review issues * fix: address follow-up mep review comments * fix: address additional mep review comments --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: pascal-open-bot <open@pascal.app> |
||
|
|
bb5ce68254 |
Viewer render modes: Solid/Rendered + textures + surface-role clay + scene themes + edges (#332)
* viewer: add Phase 1 render-modes foundation (shading/textures/colorPreset state, defaultRender prop, SSGI gating) Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: Phase 2 render-modes material-class switch (Lambert in solid, Standard in rendered) Shading-aware material factories (cached per class), reactive selection in renderers via the useViewer(shading) pattern, and dirty-rebuild on toggle for geometry/door systems. Rendered mode output unchanged. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: Phase 3a render-modes surface roles + clay palette foundation Adds surfaceRole token to core NodeDefinition, per-kind default roles, ColorPreset palettes + resolveSurfaceColor/createSurfaceRoleMaterial (glazing stays translucent), and the textures-off recolor path for def.geometry kinds (slab/fence/shelf via GeometrySystem.applyDefaultSurfaceRole) + wall. Renderer- based kinds (roof/window/stair/item/column/door/ceiling/elevator) wired in 3b. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: Phase 3b render-modes textures-off recoloring for renderer/system kinds Wires clay role coloring (textures=off) for roof/roof-segment, window, stair/ stair-segment, door, item, column, ceiling, elevator via createSurfaceRoleMaterial, reactive on textures/colorPreset. Per-surface roles: roof top+edge=roof / underside=ceiling; window frame=joinery / glass=glazing; stair+door+elevator= joinery; ceiling=ceiling; column=wall; item=furnishing. textures=on unchanged. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * editor: Phase 4a render-modes UI — Solid/Rendered toggle + per-context persistence Per-context shading via renderContext discriminator + shadingByContext (persisted); <Viewer> renderContext prop seeds per-context on mount. Solid/Rendered toggle in the editor action bar + standalone toolbar + command palette. Editor mounts default to renderContext=editor / shading=solid. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: fix window-system glassMaterial type to allow clay glazing reassignment The let was inferred as MeshLambertNodeMaterial from the imported glass constant, so reassigning createSurfaceRoleMaterial('glazing') (returns THREE.Material) failed under tsc --build. Widen the annotation to THREE.Material. Surfaced by the build (check-types had replayed a stale turbo cache). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: Phase 5 lighting — add theme-driven hemisphere light, trim fill directionals 3->2 Adds a sky/ground hemisphere fill (theme-lerped) and drops the second fill directional; the hemisphere covers the shadow-side fill it provided, at one fewer per-fragment directional term (shared by Solid + Rendered). Ambient lowered since the hemisphere now carries soft fill. Intensities are a starting point — tune visually on the gpu-perf overlay. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: tune Solid lighting for more form — stronger hemisphere sky/ground contrast, lower ambient Darker hemisphere ground (#d8d6cf -> #aaa49a) + higher hemisphere intensity and lower ambient so directional shading reads as form and undersides ground without AO. Keeps Solid free of any post-processing pass. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * chore: biome format render-mode files (lefthook pre-commit) Formatting-only — import wrapping, dep-array wrapping, single-line ternaries — across Phase 2-4a files that weren't biome-clean. No logic changes. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: scene-theme system — named environment themes (studio/paper/sunset/night/...) New SceneTheme registry (lib/scene-themes.ts) drives lights, background, and tone mapping; lights.tsx refactored data-driven (N directionals + hemisphere + ambient). sceneTheme state (persisted) + cycle-button picker in editor bar + standalone toolbar, importing the registry from the viewer barrel (single source). Default 'studio' reproduces the prior look exactly; app light/dark 'theme' untouched. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * editor: Phase 7 — popover-dropdown pickers for render mode + scene theme (editor bar) Replace the shading + scene-theme cycle buttons in viewer-overlay.tsx with DropdownMenu pickers: render mode shows 2 rows (Solid/Rendered) with one-line detail; scene theme lists all themes with a derived color-swatch strip + active check. Imports the registry from the viewer barrel (single source). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * editor: Phase 7 — dropdown pickers in standalone toolbar + export DropdownMenu from barrel Replicate the render-mode + scene-theme dropdown pickers (with swatch strip + active check) to apps/editor's compact toolbar, matching viewer-overlay.tsx. Export DropdownMenu* from the @pascal-app/editor barrel for the standalone app. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer+editor: Phase 8 — crisp geometry edge overlay (off/soft/strong/sketchy) EdgeOverlaySystem draws EdgesGeometry LineSegments over node-backed building meshes (scoped via sceneRegistry, skips zone-layer/hitbox/overlay meshes), rebuilt on geometry-uuid or mode change, line color follows scene-theme background luminance; sketchy = static TSL vertex jitter. New 'edges' state (persisted, default off) + Edges dropdown in editor bar + standalone toolbar. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer+editor: edge overlay — thick lines via Line2, drop sketchy mode Switch EdgeOverlaySystem from LineBasicNodeMaterial (1px hardware cap) to LineSegments2 + Line2NodeMaterial so edges have real screen-space width (soft 1.5px / strong 3px); resolution tracks viewport. EdgeMode is now off/soft/strong (sketchy removed). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: fix edge overlay crash — webgpu Line2NodeMaterial has no settable resolution material.resolution is undefined under WebGPU (the node material reads the viewport internally); optional-chain the .set() call so it no-ops there instead of throwing. Thickness still applies via linewidth. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: edge overlay — weld vertices to fix CSG spiderweb edges + lighter strong Position-only mergeVertices before EdgesGeometry so coplanar triangles from CSG-cut walls (doors/windows) share vertices and their interior edges are suppressed — only opening outlines + silhouettes remain. Strong linewidth 3 -> 2px (was too heavy). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: edge overlay — crease-only extractor to fix CSG spiderweb Replace EdgesGeometry (which always draws unpaired boundary/T-junction edges) with buildCreaseEdges: weld positions, keep only edges shared by exactly two faces whose dihedral exceeds the threshold, drop everything unpaired. CSG-cut walls/slabs are watertight so real corners + opening outlines survive while the interior triangulation fans (coplanar or T-junction) are removed. Open meshes (bare ground plane, billboard leaves) shed their boundary clutter too. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: crease edges — coarser weld (0.1mm->1mm) to recover CSG/extrude seam edges The cap<->side-wall top edge of ExtrudeGeometry walls drifts past 0.1mm after CSG, so it stayed unpaired and was dropped. Weld at ~1mm to pair it into a real crease while staying far below feature size (wall thickness, openings). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: replace geometry edge overlay with screen-space ink (SketchUp look) Port the prototype's screen-space ink into the post-processing pipeline: depth + normal Sobel reading the scene-pass MRT. Crease term (normalized normals, center-vs-neighbour) + distance-independent depth-step term (raw Laplacian / (1-d)² with a noise gate so flat ground stays clean). Topology-agnostic, so it finally handles CSG-cut walls/openings without the spiderweb or missing-edge problems of EdgesGeometry. Driven by the existing edges off/soft/strong mode; MRT now builds when SSGI OR ink is on; ink colour tracks scene-theme luminance. Removes EdgeOverlaySystem + crease-edges (geometry approach). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: soft/strong ink modes + keep editor overlays out of the ink Two adjustments to the screen-space ink pass: 1. Soft vs strong now visibly differ. The edge masks saturate, so the old `intensity` gain did nothing once a line was detected. Replace it with a sample radius (line thickness) + opacity: soft = 1px / 50%, strong = 2px / 100%. `inkedEdges` takes `radius` + `opacity` instead of `intensity`. 2. Editor overlays (gizmos, move handles, tool previews, grid) no longer get inked. The scene pass that feeds the depth/normal MRT now renders only SCENE_LAYER; overlays render in a dedicated pass on OVERLAY_LAYER and are composited on top after the ink + outlines, so they read as crisp UI and never get inked or AO'd. New OVERLAY_LAYER constant in viewer; editor's EDITOR_LAYER re-exports it so the two stay in lockstep. Also moves WallMoveSideHandles (the wall/fence move arrows) onto EDITOR_LAYER — it was the one overlay still on SCENE_LAYER. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: render the grid in the scene pass so geometry occludes it The depth-gate fix couldn't help the grid: its material is depthWrite:false, so it never wrote overlay-pass depth and the "didn't write depth -> keep on top" term forced it on top — hence the floor grid bleeding through walls and objects. A full-floor plane can only be occluded correctly by living in the same depth context as the scene, so move the grid onto its own GRID_LAYER which the scene pass renders (alongside SCENE_LAYER). It's flat and depth-non-writing, so the screen-space ink still ignores it; gizmos/handles stay on OVERLAY_LAYER. The grid camera layer is enabled in custom-camera-controls and disabled on the thumbnail camera so thumbnails stay grid-free, matching EDITOR_LAYER. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: strong ink — match soft's 1px thickness, differ by darkness only Strong at radius 2 read too thick. Soft's 1px line is the nice one, so use it for both modes and let strong distinguish itself purely by being fully solid (opacity 1) vs soft's lighter 50%. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: shadow frustum follows the view + a shadows on/off setting The directional light's ortho shadow camera only covers ±50 around the light target, which was pinned at the origin — so zones far from origin received no shadows no matter where the camera moved. Recentre each shadow-casting light (position + target together, preserving direction) on the view focus every frame: the orbit-controls target when available, else the camera's ground projection. The shadow area now tracks wherever the user looks. Also add a persisted `shadows` toggle (default on) to the viewer store and a "Shadows" switch in the editor settings panel — the dedicated shadows control the render-modes plan deferred. Lights gate castShadow on it. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * editor: shadows toggle in the standalone toolbar + a touch more shadow strength The shadows switch I added only lived in the cloud settings panel's Visibility section, which is hidden in the local/standalone editor (no projectId). Add a ShadowsToggle button next to the grid toggle in the standalone toolbar so it's reachable there, matching how Show Grid is exposed in both places. Also push shadow strength partway toward the aesthetic prototype (which runs near-black, no blur): bump the bright-key shadow-intensity cap 0.4 -> 0.55 and tighten shadow-radius 2 -> 1.5. Still softer than aesthetic by design. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * nodes: site ground receives shadows (lit material instead of unlit Basic) The site ground fill used MeshBasicMaterial — unlit, so it could never show the directional shadow, and shadows visibly truncated at the slab edge. Swap it for a lit MeshLambertNodeMaterial with receiveShadow on the mesh; the geometry is the site polygon (slab footprints punched out), so shadows now extend across the whole site and stop at its boundary, which is the desired bound. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * themes: per-theme clay palettes + 2x2 swatch in the theme pickers Each scene theme now carries a clayTints map (wall/floor/ceiling/roof/glazing) giving it a per-surface-role palette — e.g. Mediterranean's blue roof + warm walls. The theme pickers (standalone toolbar + community overlay) now render the aesthetic-style 2x2 swatch of those role tints over the theme background instead of the old 3-colour strip. Data + UI only; wiring the tints into the textures-off surface materials is a separate change. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * editor: slimmer theme switcher + cloud-sun icon Shrink the scene-theme toolbar button (w-[8.5rem] -> w-28) so it stops reserving space for "Mediterranean"; the label truncates when it overflows. Swap the palette icon for cloud-sun (atmosphere/lighting, distinct from the app light/dark Sun-Moon toggle) in both the standalone toolbar and the community overlay. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * editor: theme switcher icon -> swatch-book Swap the scene-theme icon from cloud-sun to swatch-book in both the standalone toolbar and the community overlay. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * themes: colour untextured building surfaces by the active scene theme Untextured walls/roof/slab/ceiling now take the active theme's per-role colour (theme.clayTints[role], falling back to the colour preset) in BOTH textures modes. The textures toggle only governs surfaces that actually have an explicit material/preset — those still show their texture when textures are on. This is what makes e.g. Mediterranean read as a blue roof + warm walls instead of the old hardcoded white/grey defaults. - materials.ts: resolveSurfaceColor / createSurfaceRoleMaterial take an optional sceneThemeId (theme tint ?? preset palette); theme folded into the cache key. - wall-materials, roof-materials, slab/geometry, ceiling/renderer: the untextured fallback now resolves to the themed role colour instead of white/grey, in both modes; theme threaded into each builder + material cache key. - wall-cutout: now reads textures/colorPreset/sceneTheme and re-applies wall materials when any change (previously it ignored textures/colorPreset entirely). - geometry-system: threads sceneTheme into the generic surface-role path + rebuild effect. Renderers/preview call sites thread sceneTheme through. Doors/windows/stairs/columns/items still use their existing defaults — a follow-up pass. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(slab): recessed (negative-elevation) slabs extrude downward again The registry geometry builder created the slab mesh at Y=0 without applying the negative-elevation offset, so recessed slabs rendered above the floor plane (pool geometry is built locally with its floor cap at Y=0 and walls rising to Y=|elevation|, so the mesh must be shifted down by `elevation` to recess). The runtime slab-system already did this; the static builder path didn't. Mirror it: shift mesh.position.y by elevation when negative. Positive elevation unchanged. Unrelated to render modes — bundled into this branch's PR. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(roof): legacy roofs render again — migration wrote invalid wallHeight 0 Legacy roof nodes (old format, no `children`) were migrated with a hardcoded `wallHeight: 0`. With zero wall height the eave height (`wallHeight - autoDrop`) went negative in getRoofSegmentBrushes, producing geometrically invalid brushes; three-bvh-csg then spammed "TriangleClipper: Coplanar clip not handled" every frame and emitted NaN positions, so the merged roof geometry failed computeBoundingSphere and never rendered. - core/use-scene migration: wallHeight 0 -> 0.5 (the RoofSegmentNode schema default), so migrated segments have a valid wall height. - roof-system: clamp eave height to >= 0.01 so an intentional wallHeight 0 can never yield a negative eave, and guard updateMergedRoofGeometry so a CSG result with NaN positions is discarded (keep the last good mesh, warn once per roof) instead of poisoning the buffer + spamming the console. Unrelated to render modes — bundled into this branch's PR. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(column): columns cast and receive shadows Column meshes (box, beam, cylinder, sphere, torus) rendered without castShadow/ receiveShadow, so columns neither dropped a shadow nor caught one — unlike walls, slabs and roofs. Set both on all column shape meshes. Unrelated to render modes — bundled into this branch's PR. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * viewer: default edges to soft Editor defaults are now solid shading / studio theme / soft edges / shadows on. Shading (solid, via EDITOR_DEFAULT_RENDER), theme (studio) and shadows (on) were already the defaults; edges was 'off' — make 'soft' the default. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * themes: fold light/dark into the scene theme (remove the separate toggle) The viewer had two overlapping appearance controls: a light/dark `theme` toggle AND scene themes (which already drive the 3D background + lights). They conflicted — e.g. Night/Twilight are dark themes, but the light/dark toggle was an independent axis still tinting the 2D scene chrome. Unify on the scene theme: add an explicit `appearance: 'light' | 'dark'` to each SceneTheme (twilight/night = dark, the rest = light) and drive everything the old toggle drove off it — canvas backdrop, grid line colours, measurement-label/ cursor/site-edge contrast, the site ground fill, the ground occluder, and the mobile viewer bg. The editor UI chrome is unaffected (always dark via a fixed body class). Removes the `theme`/`setTheme` store state (+ persistence) and every light/dark toggle UI: the standalone toolbar Sun/Moon button, the community overlay theme switch, the command-palette command, and the ifc-converter preview toolbar button. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * themes: per-theme ground colour + add the "Verdant" nature theme - Add a `ground` colour to every SceneTheme and drive the site ground fill + the infinite ground-occluder off it (instead of the binary isDark ? #1f2433 : #fafafa). Dark themes now get a lit mid-tone ground (twilight #4a4566, night #2b3247) so the ground reads as ground rather than going near-black. - Add a new green/nature scene theme "Verdant": soft green sky + lit, with a green roof clay tint and mossy ground. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * wiki: document the surface-colour / theme system The colour-per-node/renderer/system model from the render-modes work was undocumented. Add wiki/architecture/materials-and-themes.md covering surface roles, colour presets, the textures axis, scene themes (appearance / ground / clay tints), and the "untextured surfaces are theme-coloured in both modes" invariant + where each kind wires it. Also fix two pages that the same work made stale: - node-definitions: geometry builders receive (shading, textures, colorPreset, sceneTheme); document the `surfaceRole` token + applyDefaultSurfaceRole. - layers: OVERLAY_LAYER (1, viewer) with EDITOR_LAYER now its alias, the new GRID_LAYER (3, rendered in the scene pass for depth occlusion), and the overlay pass. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * nodes: wire #330 roof-accessory kinds into the surface-role/theme colours PR #330's new kinds (chimney, dormer, skylight, solar-panel, ridge-vent, box-vent) use custom renderers, so the generic textures-off recolour path never reached them — they fell back to hardcoded colours. Wire each renderer into the render-modes system: read shading/textures/colorPreset/sceneTheme and resolve untextured surfaces via createSurfaceRoleMaterial (and force the role colour when textures are off), matching column/ceiling. Roles: chimney body→wall / cap→roof; dormer wall→wall, roof→roof, glass→glazing, frame→joinery; skylight glass→glazing / frame→joinery; ridge-vent + box-vent→roof; solar-panel frame→roof (the dark product-specific cell face is left as-is). Each definition also gets its dominant `surfaceRole` token. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(roof): legacy-roof migration must use a non-zero wallHeight The render-modes/#330 merge left the legacy roof→roof-segment migration writing `wallHeight: 0`. With #330's pitch model that builds a flat, zero-volume wall CSG brush, which three-bvh-csg can't clip ("Coplanar clip not handled") and yields NaN positions — so the migrated old roof never renders. Use the schema default 0.5 (what new roofs use), giving a valid wall. The eave clamp + merged- geometry NaN guard added earlier stay as defense-in-depth. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(roof): guard slope frame against missing/NaN pitch (no more NaN geometry) getSegmentSlopeFrame used `pitch <= 0` to detect flat/zero-pitch, but an undefined or NaN pitch (a segment from an older migration that set `roofHeight` instead of `pitch`, or stale persisted data) slips past that check and computes Math.tan(NaN) → NaN tanTheta/activeRh → NaN segment geometry → the merged-roof CSG spews "Coplanar clip not handled" and NaN positions, so the roof never renders. Use `!(pitch > 0)` so any non-positive/non-finite pitch resolves to the flat frame. Self-heals bad data regardless of how the segment was produced. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(roof): migration guarantees a positive pitch for every roof-segment Segments saved with neither a valid pitch nor a roofHeight (older/partial saves, e.g. landing home-graph) fell through the legacy roofHeight->pitch branch, leaving pitch undefined. The slope-frame guard then resolved them to a flat frame, so the roof rendered as a slab instead of pitched. Branch 2b now normalises any segment lacking a valid pitch: derive from roofHeight when present, else fall back to the schema default (40deg). The migration result is cast (not zod-parsed), so this is the only place the default lands. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.7
|
0df51219d0 |
feat: IFC → Pascal converter (package + app)
Brings the IFC-to-Pascal converter into the monorepo as a pure-logic package plus a Next.js app, replacing the standalone repo that consumed published @pascal-app/* packages (and drifted from their schemas). packages/ifc-converter — pure conversion. Parses IFC via web-ifc and maps elements onto @pascal-app/core node schemas (workspace-linked, so no more version drift). Builds doors/windows, walls, slabs, columns, roofs, stairs, sites/buildings/levels. Validates each node via the real Zod schemas at build time (tryParse) and strips undefined metadata. apps/ifc-converter — the UI: drop zone, example picker, element search, JSON download, and a 3D preview rendered through the real @pascal-app/viewer (registry bootstrap + read-only scene) with a custom toolbar (camera/level/wall/grid/theme), level selector with camera-focus, auto-fit, and selection bridged to an inspector. Conversion specifics worth noting: - Door/window vertical centering (height/2; windows + sill). - Nearest-wall hosting fallback for files lacking IFCRELFILLSELEMENT, preferring walls long enough to contain the opening and clamping the along-wall position so cutouts can't overflow and break wall CSG. - Plain IFCWALL (Brep/mapped geometry) falls back to default height/thickness instead of collapsing to zero-height slivers. - Columns convert as plain structural shafts (no decorative base/capital) sized from the IFC profile. - Beams + items are skipped for now (no Pascal beam type; items need a catalog asset) — counted in the conversion summary. Large example IFCs are fetched from a public bucket at runtime; the four small ones are committed. web-ifc.wasm is copied into public/ on install/dev/build. README flags early-alpha + invites contributions. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |