a524da1574fc0a517568e121e973fc6cf6c694c1
2
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
a590747748 |
Adjustments pass: three 0.185, undo/cancel semantics, guide & panel fixes (#496)
* fix(editor): only start handle drags on primary button Right-click over a rotation/move/resize handle started the gesture and stopPropagation()'d, fighting the camera orbit. Guard every gesture starter (shared useHandleDrag, group rotate gizmo, wall endpoint/height/ move, fence move, roof trim) with event.button !== 0 before it swallows the event. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(viewer): default units from timezone/locale until user picks Derive the metric/imperial default from the IANA timezone (US, Liberia, Myanmar zones -> imperial; anything else -> metric), falling back to an explicit locale region subtag only when no timezone resolves. Timezone tracks actual location, unlike navigator.language where en-US is a common default far outside the US. The unit is only persisted once the user explicitly sets it, so an untouched preference keeps tracking location; existing persisted values are treated as explicit and left alone. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(viewer): toggle shadows via renderer.shadowMap.enabled, not castShadow Flipping a light's castShadow at runtime crashes three r184's WebGPU renderer: toggling off disposes the shadow map's GPU texture, but the node builder cache evicts with the post-toggle key, so the shadows-on entry survives still referencing the destroyed texture. Re-enabling reuses that stale state and every frame submit fails with GPUValidationError ("Invalid CommandBuffer from CommandEncoder"). Keep castShadow static and drive the user-facing toggle through the Canvas shadows prop (renderer.shadowMap.enabled), which rebuilds materials without disposing shadow resources. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(core,editor): floor undo history at scene load Undo could step back past the scene load into the pre-load (empty) state, wiping the whole project — which autosave would then persist. Two defects: clearSceneHistory() had zero call sites, so every load left the empty pre-load state in zundo's pastStates; and setScene wrote the store twice, recording a half-normalized intermediate as a second undo target. - applySceneGraphToEditor, JSON import, and reset-to-default now clear history so the loaded scene is the undo floor - setScene collapses to a single tracked write (final state identical) - clearSceneHistory also resumes tracking so a load landing inside a pause window can't strand undo recording off Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * build(three): upgrade runtime to 0.185.1, pin @types/three at 0.184 r185 renames directionToColor/colorToDirection to packNormalToRGB/ unpackRGBToNormal and splits SSGI's packed rgba output into separate AO (getAONode, single channel) and GI (getGINode) textures; wind-node's positionLocal reads become positionGeometry. @types/three stays at 0.184.1: the 0.185 typings send tsgo's inference into unbounded allocation (microsoft/typescript-go#2125 class — it ate ~70GB/90s and OOM-killed the machine). viewer/lib/tsl-compat.ts bridges the two renamed TSL exports with 0.184-typed signatures; drop it and the pin together once tsgo copes. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(viewer): gate .ktx2 preset-texture loads on detectSupport KTX2Loader.load throws before detectSupport has run, and materials created while a standalone capture canvas's renderer was still initializing cached themselves permanently texture-less — fabric slots rendered white in item thumbnails. .ktx2 loads now await whenKtx2Ready() (resolved by the first successful ensureKtx2Support), which is exported so hosts with standalone canvases can arm it. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(viewer): accept host-supplied country for the unit default applyCountryUnitDefault lets the host app feed an authoritative IP-derived country (e.g. Vercel's x-vercel-ip-country) into the unit default. Stronger signal than the timezone heuristic applied at store creation, still never overrides an explicit user choice. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): box select starts over locked guide images A locked guide's hit-rect swallowed pointer-down via stopPropagation, so marquee selection couldn't start on top of it. Locked guides now let the event bubble to the svg root; click-to-select and the unlock affordance still work because a non-drag release fires onClick as before. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(editor): live rotation readout while rotating a guide image Rotating a guide with the 2D handles gave no angle feedback. Reuse the registry layer's RotationAngleOverlay (wedge + degree chip) for guide rotate drags: sweeps from the grabbed corner's bearing at grab to its current snapped bearing, suppressed under ~0.5deg so a fresh grab doesn't flash a sliver. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(editor): lingo free-text input in the guide set-scale dialog The real-length field accepts natural measurement text via @pascal-app/lingo — 5'11", 180cm, 1m80, 12ft — parsed in the dropdown's unit (a bare number still means that unit, a typed unit wins). A faint '= 1.80 m' hint previews non-trivial input, unparseable text gets a clear error, and the odd onBlur force-reset to 0.0001 is gone. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(editor): cmd+z mid-interaction cancels the gesture instead of undoing Undo pressed while the mouse is mid-action (moving, drawing, dragging a handle) used to history-jump under the live pointer — stale carry, half gestures committing against a rewound scene. Now it reads as 'abort this action', exactly like Escape: - the global undo/redo arms first route through the tool:cancel path (covers build drafts, placement ghosts, move tools) and skip the history jump when anything was in flight (consumed, scope-active, or inputDragging); - pointer drags that only knew pointercancel (generic handle drags, group rotate, wall side/height handles, roof trim) gain the same capture-phase Escape/cmd+z keydown the group-move drags already had — fixing Escape for them too; - the existing capture-phase handlers (3D/2D group move, 2D registry move overlay) additionally accept cmd+z as cancel. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): box select arms over any guide image that won't drag Follow-up to cd830279, which only let LOCKED guides bubble pointer-down. An unlocked, unselected guide also swallowed the event for nothing (no translate drag starts), so marquee selection could never start on top of it. Now only the one case that uses the event consumes it — selected + unlocked → translate drag — and everything else bubbles to the svg root. Click-to-select still works: a non-drag release never crosses the box-select threshold, so the trailing click fires the guide's onClick. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): cmd+z during draft placement cancels instead of undoing The preset/item placement flow (useDraftNode + placement coordinator) registers no interaction scope and holds no pointer, so the cmd+z cancel guard from c699d74e saw it as idle and history-jumped mid-placement. Paused scene history is the universal tell — the draft cycle (and every adopted-move session) keeps temporal paused for the whole gesture, and an undo against a paused store lands on a stale baseline anyway. Treat !isTracking as in-flight. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): cmd+z mid-placement completes the cancel, not just skips undo 4ffda723 stopped the history jump during preset/item placement but left the draft alive: the item tool passes no coordinator onCancel — it is Escape's fall-through (switch to select, unmount the tool) that actually destroys the draft. Extract that fall-through and run it from the cmd+z path too whenever a gesture is live and nothing consumed tool:cancel, so cmd+z now behaves exactly like Escape end to end. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(editor): node selection clears a lingering reference selection Selecting a guide clears the node selection (handleGuideSelect), but the reverse was never wired: clicking a wall with a floorplan reference selected left selectedReferenceId set, and the panel manager's reference-first priority kept showing the floorplan panel until it was closed by hand. PanelManager now drops the stale reference the moment a scene selection (nodes or zone) appears. Also: the inspector's expanded state is shared across panel swaps by design, but it survived close/reopen too — deselecting everything now resets it, so a fresh selection opens the panel collapsed again. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(plugin-trees): wind displacement reads positionLocal, not positionGeometry The three-0.185 migration renamed positionLocal to positionGeometry in the wind nodes, but positionLocal was never removed in r185 — and the two are not interchangeable here. NodeMaterial.setupPosition applies the instance transform by mutating positionLocal, then overwrites it with positionNode's output; reading raw positionGeometry therefore discarded every instance matrix — leaf cards rendered unscaled at tree-local coordinates (a giant canopy filling the sky) and grass/flower instances collapsed invisibly. Reading positionLocal (instance transform included) restores r184 behavior exactly. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
5c071ecad5 |
feat(plugins): plugin contract + first-party Nature pack (trees/flowers/grass) (#457)
* feat(plugins): trees tracer-bullet plugin + minimal host panel surface
Ship one real first-party plugin and only the host surface it forces
into existence, proving the plugin contribution paths every future
plugin (mint.gg generator, Home Assistant, environments, room volume)
will reuse.
Host surface (core + editor):
- core: Plugin.panels + observable panelRegistry; loadPlugin routes
panels (namespaced by plugin id, dup-throws like nodes).
- editor: AppSidebar merges panelRegistry into the icon rail via
useSyncExternalStore; each plugin panel lazy-loaded behind an error
boundary; host extraPanels keep precedence.
- editor: widen Tool to `KnownTool | (string & {})` so plugin tool ids
(e.g. 'trees:tree') typecheck; dispatch already registry-first.
Trees plugin (packages/plugin-trees), structurally a third-party pack
(peer-deps on @pascal-app/*):
- trees:tree node — procedural low-poly geometry (oak/pine/birch/palm),
free parametric inspector (preset/height/seed + Randomize), placement
tool + ghost preview built from public primitives only.
- presets rail panel — panel -> plugin store -> def.tool -> SceneApi ->
scene -> reactive read-back ("N planted").
Loading + docs:
- apps/editor: setPluginDiscovery([treesPlugin]) in bootstrap;
transpilePackages + dep.
- wiki/architecture/plugin-authoring.md: panels field, error-boundary
contract, styling, tool-from-panel note.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugins): merge plugin panels into the v2 sidebar layout too
The community shell renders <Editor layoutVersion="v2" sidebarTabs={...}>,
a separate rail from AppSidebar. Merge registry panels into the v2
tabMap + tab bar (and thus mobile) so plugin panels show up there as
well, not only in the v1 AppSidebar.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugin-trees): ez-tree geometry + instanced rendering + snapping
Replace the placeholder low-poly geometry with dgreenheck/ez-tree
(self-contained — bark/leaf textures inlined as base64, no assets to
host) and render the forest with true GPU instancing.
Rendering:
- def.system (system.tsx): one collective renderer that groups every
trees:tree node by (preset, seed) variant and draws each variant as
one InstancedMesh per ez-tree sub-mesh, composing the parent level's
world matrix into per-instance matrices. ~1 draw call per variant.
- def.renderer (proxy-renderer.tsx): an invisible, raycastable per-node
proxy so the host's existing selection / outline / zone machinery
keeps working — no instanceId bookkeeping. (Outline highlights the
proxy bbox; documented.)
- geometry per variant generated once by ez-tree and cached; seeds drawn
from a bounded pool so trees actually share variants.
Presets remapped to ez-tree built-ins (oak/pine/aspen/ash/bush).
Placement now respects the active snap mode — isGridSnapActive() +
gridSnapStep + snapPointToGrid, like the built-in item/shelf tools.
transpilePackages += @dgreenheck/ez-tree in the editor app.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugin-trees): true-silhouette hover/select + richer presets panel
Selection/hover now outlines the real tree shape, not the bbox. The
proxy splits into an outer group (stable invisible box collider +
pointer handlers, the raycast target) and an inner registered group that
mounts the real ez-tree geometry (invisible, non-raycasting) only while
the node is hovered or selected. The host outline pass reads the
registered inner group, so it traces the true silhouette; picking stays
on the steady box. Geometry for the highlight reuses the cached variant.
Panel: redesigned cards with gradient swatches + selected state, a
"planted" count chip, and a height slider that seeds the next tree's
height (a per-instance scale — never touches placed trees or instancing).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugin-trees): curated tree params + procedural flowers (sibling kind)
Tree params: expose foliageDensity, trunkThickness, and a leafless toggle
in the inspector and the panel brush. Each is folded into the instancing
variant key and mapped onto ez-tree options (radius scale, leaf count),
so editing one tree only re-buckets that tree — instancing degrades
gracefully, never worse than per-node.
Flowers: add a `trees:flower` sibling kind — simple procedural geometry
(stem + petals + center, merged per material), presets daisy / tulip /
lavender, instanced + selectable exactly like trees.
Refactor: extract the instanced renderer + selection proxy into a generic
`instanced.tsx` (InstancedKindSystem + KindProxy) and the snap/level/grid
placement wiring into `placement.tsx` (usePlacement). Trees and flowers
are now thin bindings — the template for future plant kinds.
Panel: a Trees / Flowers toggle, gradient preset cards, per-kind planted
count, and brush sliders.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(plugin-trees): native inspector controls in panel + preset thumbnails + ez-tree credit
- swap the panel's custom slider/checkbox/toggle for the host's exported
SliderControl/ToggleControl/SegmentedControl so the brush matches the
right-hand inspector pixel-for-pixel
- replaceable preset thumbnails (inline SVG data URIs, no asset hosting) render
as <img> cards instead of gradient swatches
- credit footer linking @dgreenheck/ez-tree (Daniel Greenheck, MIT)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): all ez-tree presets + type + leaf/branch colours, flower petal colour, grass kind
- tree presets now cover all of ez-tree's built-ins via species × size
(Small/Medium/Large + Bush 1/2/3 + Trellis), plus a Deciduous/Evergreen type
- edit-only leaf & branch colour tints (leaves.tint / bark.tint), all folded
into the instancing variant key
- flowers gain a per-flower petal colour (baked from preset at placement)
- new trees:grass instanced kind — procedural blade tufts (meadow/fescue/reed)
with a per-tuft blade colour, reusing the generic instanced + placement core
- panel: Trees/Flowers/Grass segmented switch, size + type controls, native
host controls throughout; credit links Daniel Greenheck's X
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): tolerate nodes persisted before new fields existed
treeSpecOf/flowerPetalColor now default every geometry field, and hexToInt
guards undefined — trees/flowers placed before size/type/colour fields were
added load with neutral defaults instead of crashing the instanced renderer.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): shared always-on wind + pin credits to panel bottom
- wind.ts injects a sway into each material's begin_vertex driven by one shared
uTime uniform (advanced per frame in the instanced system); USE_INSTANCING
guards keep the same material valid for the non-instanced placement ghost.
Applied to tree, flower, and grass materials — a whole scene sways like ez-tree.
- credits footer is now sticky to the bottom of the panel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): rename rail panel Trees -> Nature (covers trees/flowers/grass)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): rename panel header Plant -> Nature to match the rail
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat: bake-exportable instanced plants + renderer-agnostic wind
Bake (GLB export): add a transient useViewer.isExporting flag. BakeExporter
flips it, waits for the commit, then exports. KindProxy watches it and, during
export, emits each plant's REAL visible geometry under scene-renderer (which the
exporter clones) instead of the invisible collider — so instanced kinds
(def.system) that live outside that subtree are captured. The collider box is
dropped during export so it doesn't bake as a phantom solid.
Wind: the previous onBeforeCompile wind was a no-op under the editor's WebGPU
renderer (WebGL-only hook). Replace it with a renderer-agnostic per-instance
base-pivot tilt animated in useFrame (which FrameLimiter drives continuously).
Reads as wind under any renderer; removes the dead wind.ts + applyWind calls.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): TSL vertex-bend wind (WebGPU), replacing CPU tilt
wind-node.ts adds a TSL positionNode that bends each plant proportional to
height above its base, phased per-instance (instanceIndex) and per-vertex, so
tips sway and roots stay planted — animated on the GPU via the renderer's time
node. ez-tree is untouched: its materials are copied into MeshStandardNodeMaterial
(toWindMaterial); flowers/grass build node materials directly (windStandardMaterial).
Instance matrices go back to static.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): tree materials render black under wind (Phong not Standard)
ez-tree's bark/leaves are MeshPhongMaterial; copying them into a
MeshStandardNodeMaterial swapped the shading model (specular/shininess ->
roughness/metalness) and rendered black. Convert into the matching node
material type (Phong->Phong, Lambert->Lambert, else Standard) so map/color/
alphaTest/side are preserved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): trees still black — build node material from map/color explicitly
Material.copy() doesn't transfer a classic material's map/color onto a node
material, so textured trees rendered black (flowers/grass were fine — they carry
no map). Re-create the ez-tree materials as MeshStandardNodeMaterial with map,
alphaMap, color, side, alphaTest passed explicitly in the constructor — the same
proven path the flower/grass materials use.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): tree wind — per-leaf flutter (ez-tree style), static trunk
The whole-tree height-based bend was a rigid rotation about the base ('rotating
in place'). Replicate ez-tree's actual approach: scale sway by the leaf card's
uv.y and apply it ONLY to the 'leaves' material (multi-frequency wave, phased per
instance + per leaf) so leaves flutter from their attachment while bark/branches
stay static. Flowers/grass keep the gentle whole-plant stem bend.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugins): Plugin.onSceneLoad hook + viewer application; trees wind via it
Adds a broad, plugin-declared post-load scene hook so effects survive GLB export:
- core: Plugin.onSceneLoad (lazy, three-free) + observable sceneHookRegistry + loadPlugin routing.
- viewer: applyPluginSceneHooks util; PluginSceneHooksSystem re-runs it on the live
scene as nodes change; GlbScene runs it on each loaded baked GLB.
- plugin-trees: declare onSceneLoad; wind is no longer welded into the materials —
the hook re-attaches LEAF_FLUTTER/STEM_BEND by material name (leaves / flower-* /
grass-*), so it now animates in the baked /viewer too, not just live.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): scale-invariant leaf wind (÷ modelScale) so baked GLB matches editor
The bake's quantiser renormalises each plant mesh to [-1,1] and moves real size
into a large node scale (~3 on trees). LEAF_FLUTTER added a constant local offset,
so in the baked GLB it was multiplied by that scale → ~3x over-swing. Divide the
sway by modelScale.x to keep a constant world-space amplitude; editor (scale 1)
is unchanged, baked now matches.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* revert: onSceneLoad wind approach → back to wind-in-materials
Reverts the Plugin.onSceneLoad hook + viewer application + modelScale compensation
(commits 893ca839, 6c9ee003). Superseded by the bake-policy 'replace' model
(plans/editor-plugin-trees-example.md Part D): trees render live in the viewer via
their own path, so wind is a plain positionNode on the material again — no hook,
no baked-geometry decoration, no coordinate-space fights.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(bake): per-kind bake policy (static/strip/replace)
Adds NodeDefinition.bake ('static' default | 'strip' | 'replace') + registry
helpers bakePolicyOf/kindsWithBakePolicy in core. Generalises the previously
hardcoded scan/guide handling:
- glb-export strips kinds with bake==='strip' from the artifact (was a
scan/guide type check); 'replace' kinds stay baked (portable static snapshot).
- glb-reference-nodes selects rebuild candidates by policy instead of type.
- scan/guide declare bake:'strip'; trees/flower/grass declare bake:'replace'.
Viewer-side 'replace' swap (strip baked meshes + live-rebuild) is the next slice.
Part of plans/editor-plugin-trees-example.md Part D.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(bake): viewer 'replace' swap — hide baked meshes, re-render live
Adds NodeDefinition.bakeReplaceRenderer (falls back to renderer). The baked
/viewer now, for kinds with bake:'replace' and a loaded plugin:
- hides the static baked meshes (bakePolicyOf(kind)==='replace') in GlbScene's
identity pass — capability-gated, so with no plugin the meshes stay;
- re-renders each node live via buildGlbReplaceNodes + the shared portal-into-
baked-level path (GlbReferenceNode now prefers bakeReplaceRenderer), so trees
ride level stacking automatically and wind runs in real coordinate space.
plugin-trees ships a hookless KindStatic (real geometry + wind materials, no
collider/selection) and per-kind static-renderer binds; tree/flower/grass point
bakeReplaceRenderer at them. Completes plans/editor-plugin-trees-example.md Part D.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* perf(viewer): memoize GlbReferenceNode(s) — skip forest re-render on camera move
GlbScene re-renders per frame during camera movement (hover raycast / walkthrough
HUD). The rebuilt nodes reconciled every frame — fine for 1-2 scans/guides, but a
bake:'replace' forest puts dozens of nodes here (profiler: KindStatic x56 6ms,
GlbReferenceNode x57 4ms per frame). memo at the node boundary skips the whole
subtree (incl. the plugin renderer) when (node, anchor) are unchanged; both props
are stable refs, so it short-circuits cleanly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* perf(plugin-trees): NO_RAYCAST on KindStatic meshes — cheap hover over a forest
The baked scene's <primitive> has pointer handlers, so R3F recursively raycasts
every descendant on each pointer move (incl. orbit drags). The live replace trees
had fully-raycastable dense ez-tree geometry, so hover cost ~400ms/frame over a
forest (profiler: 'JavaScript' 413ms during camera move). They carry no pascalId
(a hit resolves to the level, not the tree), so they're scenery, not pick targets
— mirror KindProxy, which already NO_RAYCASTs its real geometry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* refactor(bake): viewer 'replace' renders instanced per level (was per-node)
Replaces the per-node KindStatic viewer path with a collective instanced one,
mirroring the editor's system instead of diverging from it:
- extract InstancedNodes from InstancedKindSystem (shared by both) with a
localSpace flag: editor folds parent world matrix (root instances); viewer uses
level-local matrices + NO_RAYCAST, portaled into the baked level.
- bakeReplaceRenderer is now a collective renderer (BakeReplaceRenderer<N>,
receives {nodes}); GlbReplaceInstances groups replace nodes by (level, kind) and
portals each kind's instanced renderer into that baked level. GlbReferenceNode
reverts to per-node renderer (strip kinds only).
Fixes: forest hover cost (100+ tree meshes → a few instanced draws, R3F walks far
fewer objects) and per-tree wind phase (instanceIndex varies again; per-node
KindStatic gave every tree phase 0 → unison sway). Trees still ride level stacking
(portaled) and stay static in a plain glTF viewer.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* perf(viewer): BVH the baked scene — accelerate hover/pick raycasts
The baked /viewer runs with useBvh={false}, so GlbScene's hover/pick raycasts
against the baked building were brute-force triangle intersection (profiler:
_computeIntersections + intersectTriangle ~30%). The parametric viewer wraps its
scene in <SceneBvh>; the baked one never did. SceneBvh's effect is one-shot on
mount and can't catch the async-loaded GLB, so compute a per-mesh BVH inside
GlbScene keyed on gltf.scene instead. 'replace' instances are NO_RAYCAST, so the
raycast===Mesh.prototype.raycast guard skips them (mirrors SceneBvh).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): inherit ez-tree preset by default (seed/type/tints)
Our node defaults (seed:1, treeType:deciduous, colors:#ffffff) were applied as
*overrides* on top of loadPreset, discarding each preset's tuned seed, growth
model, and tints — so our trees looked nothing like eztree.dev (pine grew
deciduous, foliage washed white, every silhouette off).
Mirror the flower petalColor pattern: seed/treeType/leafColor/branchColor are now
optional; generateTree only overrides an ez-tree option when the node set it,
otherwise loadPreset's value stands. Placement stores none of them (fresh tree =
pure preset; all same-preset trees share one instancing variant); the deciduous/
evergreen brush toggle is gone (growth model comes from the preset). The inspector
keeps them as per-tree overrides, and Randomize still varies the seed.
Verified against ez-tree: fresh Oak Medium → seed 35729 + preset tints; Pine
Medium → evergreen + seed 13977; overrides apply when set.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): bundle real preset artwork (webp, in-package)
Replaces the placeholder SVG thumbnails + lucide panel icon with the real nature
art. 13 webp (~126KB total, 256px cards / 128px icon) live in src/assets and are
imported via art.ts — both consumers are Next, so transpilePackages runs them
through the image pipeline (hashed, cached /_next/static/media URLs). No CDN, no
per-app public/ mirroring; the assets travel with the package.
- art.ts: central webp imports → TREE_ART / FLOWER_ART / GRASS_ART / NATURE_ICON
- presets/flower-presets/grass-presets: thumbnail ← bundled art (was *Thumbnail())
- index.ts: Nature panel icon ← NATURE_ICON (was lucide:leaf)
- assets.d.ts: ambient *.webp decl (no next type dep)
- remove thumbnails.ts (placeholder generators, now dead)
Verified on the running dev server: webp emitted + served (HTTP 200, image/webp).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(plugin-trees): square preset cards on light-gray flattened thumbnails
Regenerate the 12 thumbnails with the transparency flattened onto gray-100
(#f3f4f6) and render the card square (aspect-square, was h-16 crop). The
nature-icon keeps its transparency for the icon rail.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(plugin-trees): correct move-drag + outline behavior for instanced plants
Two selection defects, one root cause each:
1. Outline moved mirror-wise during a move drag. The host move tool drives the
registered Object3D imperatively with absolute level-local positions (and
mirrors them via useLiveTransforms) — the contract ParametricNodeRenderer
satisfies by putting position + registration on the same group. KindProxy
registered a child nested inside the transform-carrying group, so drag
positions landed in the node's rotated frame (placement gives every plant a
random Y rotation → deltas rotated up to 180°). Restructure: the registered
group now carries position/rotation (live-transform aware); the box collider
is a positioned sibling, staying out of the outline mask.
2. Outline froze while the mesh swayed. The outline mask pass renders with a
shared override material, so it can never follow the material positionNode
wind. Instead, while hovered/selected the collective system skips the node
and the proxy mounts the real geometry with static twins of the wind
materials (toStaticMaterial — explicit property transfer; node-material
clone() drops map/color). Outlined mesh == visible mesh, both still.
Bonus from the same restructure: a move drag now animates the actual plant in
realtime (the proxy is what the tool drives), not just the drag box.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(plugin-trees): 2D plan symbols + trunk-sized footprint
- def.floorplan for the three kinds — the registry floor-plan layer renders any
kind that provides one, so this is all plugin nodes need to appear in 2D.
Tree: dashed canopy ring (dashed = overhead element) in the preset swatch +
solid trunk dot; ring is pointer-events:stroke so the large disc doesn't
steal clicks from what's under the canopy. Flower/grass: small colour dots.
Selected → palette stroke + move-handle; hovered → hover stroke.
- Tree floorPlaced.footprint is trunk-sized (treeTrunkRadius) instead of
canopy-sized, so the move/placement drag box hugs where the tree actually
plants instead of spanning the crown. The invisible hover collider keeps its
larger radius — only the displayed box shrinks.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(plugin-trees): trunk-sized drag box, 45°-aligned rotation, rotate gizmo
- The move drag box ignored floorPlaced.footprint: with collides:false the tool
auto-measures the rendered mesh — which, since the selection swap-out, is the
whole canopy. Declare capabilities.dragBounds (trunk-sized, node-local) so the
box hugs the trunk and rotates with the node instead of wrapping the crown as
a world AABB.
- Placement wrote a fully random Y rotation, so the box/gizmo never sat on a 45°
step. Snap the random rotation to 45° increments (variety preserved, alignment
restored) and widen rotatable.snapAngles to 8×45° on all three kinds.
- Add the standard rotate gizmo (def.handles, shelf-style arc handle): ring
around the trunk near the ground — not the canopy, which would put the handle
meters out on a large oak.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(plugin-trees): live rotate preview + ground-level rotate ring
- KindProxy now folds useLiveNodeOverrides into its transform (mirrors
ParametricNodeRenderer) — the rotate/resize gizmos publish mid-drag patches
there, so the plant turns in realtime instead of snapping on commit. The
snap-on-commit (with the arc delta wrapping to ±180°) is also what made long
drags land 'the wrong way'; with live feedback the direction reads correctly
and matches the item gizmo pipeline exactly.
- Rotate ring drops from mid-trunk to 0.25m — a floor affordance like the item
gizmo, not a waist-height hoop.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(registry): panelForKind — 'find in catalog' opens a plugin kind's panel
loadPlugin now associates every node kind with its plugin's first (namespaced)
panel id; panelRegistry.panelForKind(kind) exposes it. A host's find-node
handler can open the right panel for any plugin kind with zero per-plugin
knowledge.
plugin-trees uses it end-to-end: a module-level selection:find-node listener
(find-sync.ts, imported by the manifest so it's live from plugin load) points
the panel store at the found node's section + preset — panel section state
moved from panel-local useState into the store to make it addressable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(registry): plugin panels declare their workspaces (default edit-only)
Plugin panels rode into the studio rail: the host swaps its own sidebar tabs by
workspaceMode, but usePluginPanels appended registry panels unconditionally.
PluginPanel gains workspaces?: readonly ('edit'|'studio')[] — manifest metadata,
default ['edit'] (an authoring panel has no business in the clean render
workspace; a plugin shipping studio tooling opts in explicitly). usePluginPanels
filters by the current workspaceMode, covering both the v1 AppSidebar and v2 tab
bar paths. Nature declares nothing and disappears from studio via the default;
the v2 layout's existing active-tab fallback handles a panel vanishing mid-use.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* docs: link plugin-authoring guide from README + CONTRIBUTING, fix stale wiki path
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(plugin-trees): keep ez-tree off the eager SSR path
ez-tree loads its inlined textures at module scope (needs document), so any
eager import chain reaching geometry.ts crashed Next prerender
(ReferenceError: document is not defined on /_not-found). Move the pure
helpers (mulberry32, naturalHeight) to variant-utils.ts so the
flower/grass builders and floorplan no longer pull ez-tree, and drop the
generateTree re-export from the package barrel (no external consumers).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|