603f5d2242e11521692b4299fc724d2a389c9f6e
10
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
c45808840c |
nodes: add modular cabinets and wall trim controls (#461)
* Add roof surface placement support for items Items (e.g. solar panels) can now be placed on sloped roof surfaces. The placement system computes euler rotation from the roof surface normal so items sit flush on the slope instead of going inside. - Add roofStrategy to placement-strategies with enter/move/click/leave - Wire roof:enter/move/click/leave events in the placement coordinator - Add calculateRoofRotation in placement-math using surface normals - Support full 3D cursor rotation for sloped surfaces - Items on roofs are parented to the level with world-space rotation Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fixed conflict * Add modular cabinet node * Add modular cabinet run and tall cabinet workflows * Add cabinet paint slots and material groups * Improve modular cabinet presets and wall snapping * Improve cabinet wall snapping * Fix cabinet wall snapping and countertop joins * Improve cabinet appliance compartments * Improve fridge visuals and smooth cabinet animations Fridge exterior is now brushed silver with brass accents and the interior is all white. Door/drawer animation no longer rebuilds the full cabinet geometry per frame — animated parts carry pose metadata that a new per-frame cabinet system applies directly to transforms. Co-Authored-By: Claude <noreply@anthropic.com> * Improve gas hob flames and cooktop knob controls Port the curved-flame look from reference gas-burner photos: each burner gets a ring of vertex-coloured tube flames (blue body, orange-yellow tips) whose spines breathe and flicker per frame at ~30fps, plus a flat ignition glow and a faded heat halo. Fix the knob pointer notch to rotate with the knob instead of drifting sideways. Also includes cooktop compartment presets/panels and cabinet selection/move affordance work. Co-Authored-By: Claude <noreply@anthropic.com> * Fix cabinet UVs and registry actions * Fix registry move snap typecheck * Fix cabinet knob animation concurrency * Fix cabinet material disposal, undo flood, and 2D move parity - Flag shared cabinet appliance materials (and the viewer's cached material factories) as cached so geometry rebuilds no longer dispose materials still referenced by other nodes, forcing scene-wide shader recompiles. - Route the door/drawer open animation through useLiveNodeOverrides with a single final commit, so one play is one undo step instead of ~20. - Add a cabinet-module floorplanMoveTarget: 2D drags now convert through planToLocal + magneticSnap like the 3D path, instead of writing plan coords into the run-local position (teleporting modules on rotated runs). - Re-key sibling runs (cabinetAdjacencyRevision) when a run's neighbor-affecting inputs change, so countertop overhang joins re-trim when a neighbor moves/resizes/deletes. - Narrow the cabinet panel's scene subscriptions (useShallow module selector) so it stops re-rendering on every scene mutation. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Restructure cabinet schema and centralize run math/mutations Prepares the cabinet node for the queued specialty units (corner L-shape, sink base, appliance gap, open shelving): - Add a `moduleKind` discriminator (default 'standard') on CabinetModuleNode so new unit types extend an enum instead of overloading the stack, and split CabinetCompartment into a z.discriminatedUnion so invalid field combos (drawer with rack style, fridge with burner state) are unrepresentable. Shared box fields now come from one `cabinetBoxFields` object so run/module schemas can't drift. - Extract the straight-line run assumption (sort-by-x, edges, adjacency, spans, side-insert, reflow, frame transforms) into run-layout.ts — previously spread across definition/geometry/quick-actions/stack/ move-frame, so corner support would have meant five parallel edits. - Consolidate the run mutations (add module, wall cabinet/hood above, base↔tall switch, layout-revision bump) into run-ops.ts on SceneApi. Panel and quick-actions had drifted copies: the panel's add-module skipped gap checks, revision-bump scope differed per surface. - Remove dead code: node-level doorStyle (with a migrateNodes entry — geometry only ever read per-compartment doorType), the unreachable slot-handle mesh block, the no-op handlePosition 'edge' enum value, wallLocalX, and duplicate totalCabinetHeight definitions. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Add cabinet snap tests and split the cabinet panel - New tests: cabinetModuleParentFrame.magneticSnap (flush snap, threshold, Z alignment, nearest-edge) and wall-snap's resolveCabinetWallFaceOffset / collectCabinetWallSnapNeighbors (straight face, miter taper, ray-miss fallback, yaw/face/parent filtering) — 87 cabinet tests, up from 71. - De-brittle geometry test lookups: coordinate-encoded mesh names are now matched by pattern, so dimension-default changes don't break them. - Split panel.tsx (1,541 → 679 lines): CompartmentCard + option constants into compartment-card.tsx, CabinetRunPanel + reflow wiring into run-panel.tsx, and the compartment type-transition tables into a pure resolveCompartmentTransition in stack-transitions.ts. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Split cabinet geometry.ts into per-appliance modules Pure code motion: geometry.ts (4,728 lines) becomes a 336-line orchestrator dispatching into geometry/ — shared helpers + cached appliance materials (shared.ts), CSG fronts/handles/doors/drawers (fronts.ts), run spans + countertop (run.ts), and self-contained hood/fridge/cooktop/dishwasher/ oven-microwave/pantry builders. No mesh names, userData stamps, materials, or math changed; the './geometry' import path is unchanged. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Add undermount sink compartment with CSG-cut countertops New 'sink' compartment type (single / double / 60-40 bowl layouts) following the cooktop pattern: zero stack height, countertop-plane geometry, panel card with a bowl-layout selector, and a Sink Base preset. Bowl openings are subtracted from both module- and run-owned countertop slabs via three-bvh-csg; the basin shells, drain plumbing, and a spec-sheet-proportioned gooseneck faucet (Grohe Minta-style pin lever) render beneath the cut. Sink modules skip the carcass top panel and the deck under the sink row so the basin hangs through. Also scope the viewer mock in roof-surface-placement-guides.test.ts to only stub useViewer — the bare module stub leaked into later suites and broke real CSG imports. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Update ifc-converter next-env reference to build-mode route types Regenerated by `next typegen` during check-types; points at .next/types instead of the dev-mode .next/dev/types path. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Draw cabinet floor plans with kitchen drafting symbols Replace the per-module box soup with NKBA/architectural-convention symbols: the run draws one heavier countertop outline per span (extended by the overhang), base modules draw their front edge plus compartment symbols — rounded bowl rects + faucet dot for sinks, burner/zone rings for cooktops (reusing the 3D layout tables so 2D and 3D always agree) — and appliance modules carry standard upright labels (DW / REF / OV / MW / PAN). Nested wall cabinets and hood-only modules draw as dashed open outlines per the above-cut-plane convention. * Play cabinet open/close animation on the E interaction key Add an `e` slot to registry KeyboardActions and dispatch it in the keyboard hook ahead of the legacy door/window arms, so kinds opt into the E interaction on their NodeDefinition. Cabinets register it: E on a module eases its doors/drawers open or closed, E on a run swings every child module together, and hood-only modules fall through. The panel's rAF animator moves into cabinet/interaction.ts (live-override frames, single undo commit) so the Play button and E share one animation, and the shortcuts dialog now documents E. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Add kitchen island and bar counter support to cabinet runs Islands: run-level countertopBackOverhang (seating side) and withFinishedBack (decorative back panel), plus an I-key island placement mode in the cabinet tool that skips wall snap. Bar counters: optional barLedge {edge, height, depth} drawing a knee wall and raised slab along the back or either run end, superseding the seating overhang on its edge. withWaterfall drops slab-material panels to the floor on exposed run ends. 2D floorplan outlines, selection bounds, geometry keys, and run panel controls updated in parity; schemaVersion 3 -> 6. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Merge quick-action arrow and plus into one directional add glyph The add-left/add-right buttons showed two unrelated icons; a single plus-on-tail arrow reads as "add on this side". Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Extend plugin discovery instead of replacing the host source Also track the ifc-converter next-env routes reference update. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Add L-corner runs to modular cabinets with run-scoped grouping An "L Left/Right" quick action spawns a perpendicular base leg, wall leg, and wall bridge as metadata-linked runs parented to the SOURCE RUN, so the run stays the single group: selecting a base module selects only it, and the clicked module never becomes a container. Corner runs re-anchor when the source module resizes or moves (new MovableParentFrame.onCommit hook, mirrored in the 2D floorplan commit), run bounds fold in child leg runs, and deleting one corner member removes only that node while unlink patches keep the survivors' link metadata consistent. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Delete emptied cabinet run groups in the same delete gesture Removing a run's last child (module or derived corner leg) left an empty group node in the scene graph and persisted data. onDeleteCascade now receives the gesture's pending delete ids so multi-select deletes count siblings as gone, and both cabinet kinds cascade the orphaned parent run away in one undo step. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Remove filler front gap treatment * Apply architecture review fixes across cabinet, plugin-trees, and framework Move cabinet semantics out of packages/editor behind registry capabilities (def.tree, selectionProxy.bypassDirectPick, IconRef quick-action icons, catalog tool field), route cabinet selection through a core selection-proxy helper, and make PanelWorkspace an opaque host tag. Fix the cabinet placement undo flood, dirtyNodes.add bypasses, normalized UVs on paintable slots, plugin-trees ghost layers/stale level transforms/untyped find-sync event, and cross-file store-mock pollution plus orphaned dist tests that broke combined test runs. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Propagate front styling to L-corner runs even when re-layout bails Group style changes rode entirely on syncDerivedCornerRun, which bails silently when a later-drawn wall blocks the corner layout or a leg run gained modules outside the derived-run spec — leaving the L legs styled stale. Apply the style patch directly to every linked corner run before attempting the geometric re-layout. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * Improve editor viewer integration * Refactor plugin panels and floorplan invalidation * UV-unwrap and material-assign roof-segment trim planes * Fix cabinet placement snap feedback * Add cabinet wall snap bypass * Fix cabinet continuous placement flow * Implement wall band material slots * Add corner addition preview functionality and related tests * Fix cabinet and wall band behavior * Fix architecture review blockers * Fix post-merge quality check * fix cursor review feedback * Fix cabinet placement type and quick action history * Improve cabinet placement feedback * Make wall bands configurable * Add wall trim profiles and default materials * Fix architecture review issues * Fix cabinet rotation and wall band visibility * Fix sink appliance paint persistence * Bake cabinet animations and preserve wall band material * Fix cabinet group duplication and module snapping * Fix cabinet duplication architecture * Fix cabinet floorplan test and make placement-type hint a live chip - floorplan.test.ts: pass the required liveTransforms map to cabinetFloorplanSiblingOverrides (the runtime callers always supply it) - ToolHint gains an optional generic `chip` contract (subscribe/value/ cycle/labels) so a kind can render a tool hint as a live mode chip — like the snapping/continuation chips — without the editor knowing the kind's store - cabinet: the I hint now shows the current value (Type: Cabinet / Type: Island) and is clickable to toggle Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: Wassim SAMAD <wass08@gmail.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
a2f1ef1683 |
docs(architecture): codify live-overrides drag protocol + floorplan per-node perf
Capture the durable patterns from the placement-interaction overhaul so reviews and new devs don't regress them: - tools.md: new "Data-driven live drag" section — kinds whose geometry is recomputed from fields (wall/opening/endpoint) preview via useLiveNodeOverrides (merged by getEffectiveWall/getEffectiveNode), store written once on commit; per-tick useScene.updateNodes is the documented anti-pattern (churns the nodes ref → app-wide re-render flood). Plus "Floorplan registry: per-node subscriptions" — each entry subscribes to its own live slice, memo'd with stable props, sibling-epoch invalidation; widening to the whole Map / dropping memo is a regression. Plus a note that the HUD snapping chip renders for any snap-context tool, not only those with def.toolHints. - review SKILL.md: matching blockers in §C (data-driven drag / no per-tick store write) and §D (per-node list subscriptions). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
f0206dc6eb |
docs(arch): codify the unified snapping/modifier convention + enforce in review
The snapping model (Shift = cycle mode, Alt = force/free, mode-driven reads via isGridSnapActive/isMagneticSnapActive/isAngleSnapActive, snapProfile-declared context) lived only in code and the plan; tools.md still preached the legacy "Shift = bypass snapping". Close the drift so the architecture review refuses tool changes that revert to the old pattern: - tools.md: replace the held-Shift-bypass manipulation policy with the unified mode-driven model + the single snap read path. - interaction-scope.md: new "Snapping mode & modifiers" section (contexts, read path, modifiers, the chip-needs-a-scope rule) + a Rules bullet + the known-legacy MEP movers (migrate-on-touch) incl. the dual-path constraint (a bespoke mover must not open a `moving` scope — it re-mounts the generic mover via useMovingNode). - review-architecture skill: add interaction-scope.md to the reads and a new "F. Interaction scope, snapping & modifiers" checklist — new shiftKey-bypass, ungated grid step, missing snapProfile, a new useEditor interaction flag, or a bespoke mover opening a moving scope are blockers; touching the legacy MEP movers forces migration. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.8
|
f773e6b8c5 |
feat(editor): placement & interaction overhaul — FSM spine, bug tracks, perf
Implements plans/editor-placement-interaction-overhaul.md: an authoritative interaction-scope state machine plus the catalogued placement/interaction fixes, and split-view floor-plan performance. - Interaction-scope spine (lib/interaction/* + store/use-interaction-scope), driven from central useEditor setters; overlay scoping (zone labels, context badges, floating action menu) reads resolveOverlayPolicy. - Bug tracks A/B/D/E/F/G/H: handle/cutout raycast, footprint validity, auto-slab loop, ceiling hosting, B-key tool desync, 2D drop offset, per-frame jank. - Snapping modes (grid/lines/angles/off) + contextual HUD chips; modifier model (Shift=cycle, Alt=free place, Ctrl=grid step). - Item move now tracks the cursor 1:1 (was a laggy per-frame lerp); handle rig hides during a whole-node move; rotate gizmo advertises Shift=free rotation in the HUD and hides the move cross while rotating. - Floor-plan perf: pause live reactivity while in 3D-only view; per-node geometry cache so only changed nodes rebuild on a drag; hoist wall miters to a once-per-pass ctx.levelData (O(N^2) -> O(N) on wall/opening drags). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
a0d3d9c701 |
feat(editor): door/window placement-feel polish + placement-state refactor (#411)
Round 8 of the opening-placement UX work. Make door/window placement feel
physical and predictable, and unify the validity/placement logic behind one
shared decision.
UX:
- Window default sill 0.5 m (DEFAULT_WINDOW_SILL_M) so fresh windows float
slightly above the floor; existing windows keep their own sill.
- Dev-only floor "shadow" projection for windows during placement/move
(footprint + dashed drop-line) so an elevated window's plan spot is legible.
- Move SFX: one soft grid-snap click per grid step — identical free-following
over floor or sliding on a wall (keyed on the raw cursor; per-frame + step
dedup), no separate snap cue (that was a "double"). Mirrored into the 2D
floorplan-move so 2D and 3D match.
- Shift = force-place over a collision (commit allowed; ghost stays a red
warning) + free-place (lands at the raw cursor but keeps the alignment guides
visible). Tint flips green/red live when Shift is pressed/released stationary.
- On-wall preview is now the tinted ghost (green placeable / red colliding),
matching the free-follow ghost, instead of a pale solid mesh + thin wireframe.
- R-flip fixes: always toggles (no initial no-op needing a second press),
e.repeat filtered, ghost rebuilds with the live `side`, and the ghost's
on-wall world yaw uses `itemRotation - wallAngle` so it faces exactly what
commit places (cursorRotation was π off for the asymmetric ghost). R ownership
follows the current pointer pane (capture-phase + stopImmediatePropagation in
the 2D overlay) so 3D and 2D never double-flip or go dead.
Refactor / quality:
- New `resolveOpeningPlacement({collides,forcePlace}) -> {placeable,tint}` in
shared/wall-attach-target.ts — the single source of truth the ghost tint AND
the commit gates both consume, so they can't disagree under Shift.
- Consolidated the byte-identical `hasWallChildOverlap` into one shared impl
(door-math/window-math re-export it).
- applyGhost gained a green "valid" tint.
- Removed dead `cursorRotation` from the move-tool targets after the yaw fix.
Docs: "2D <-> 3D behavioral parity" principle in wiki/architecture/tools.md
(+ README + AGENTS.md) — applicable behaviors must exist in both views.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
Aymeric RabotandGitHub
|
5411f5abc8 | fix(editor): improve guided manipulation and snap affordances | ||
|
|
46f94b97b3 |
editor: alignment guides + floor-plan move/placement parity (#372)
* Add roof surface placement support for items Items (e.g. solar panels) can now be placed on sloped roof surfaces. The placement system computes euler rotation from the roof surface normal so items sit flush on the slope instead of going inside. - Add roofStrategy to placement-strategies with enter/move/click/leave - Wire roof:enter/move/click/leave events in the placement coordinator - Add calculateRoofRotation in placement-math using surface normals - Support full 3D cursor rotation for sloped surfaces - Items on roofs are parented to the level with world-space rotation Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fixed conflict * feat(editor): 3D alignment guides for item/wall/fence move + placement Bring Figma-style alignment guides into the 3D editor, reusing the shared pure resolver (`resolveAlignment`) and ephemeral guide store (`useAlignmentGuides`) that previously only drove the 2D floor plan. Core: - `alignment-anchors.ts`: node→anchor adapters (footprint AABBs, corner anchors, wall/fence segment anchors) + `refineGuidesToGap` so a guide's line and distance read to the candidate's nearest edge, not the far side. - `bboxCornerAnchors` + corner-only footprint anchors so alignment locks to item edges, never centrelines. - `resolvePointSnap` (point-coincidence variant; kept for future use). Editor: - `Alignment3DGuideLayer`: dashed ribbon + flat floor dots + distance pill, in the project's indigo accent, mounted inside ToolManager's building-local group so guides render in the cursor's frame. - Producers wired in the item move tool, item placement coordinator, and the wall + fence endpoint tools; walls and fences cross-align. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(editor): align guides snap to nearest real anchor, drop bbox re-span The 3D alignment guide could place its end dot in empty space: a diagonal wall (or any rotated / non-rectangular object) has bounding-box corners that don't lie on the object, and `refineGuidesToGap` re-spanned the guide to exactly those AABB edges — so the dot floated "along the coordinate" rather than on the item. - `resolveAlignment` now tie-breaks to the candidate anchor NEAREST on the perpendicular axis (after the tightest axis match). Anchors are real points (corners / endpoints / midpoints), so the guide always connects to the closest actual point — which also yields the facing-edge gap distance. - All four producers (item move, item placement, wall + fence endpoints) now publish the raw resolver guides; the AABB nearest-edge re-span is gone. - Removed the now-dead `refineGuidesToGap` and `resolvePointSnap` helpers (and their tests / exports). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(editor): group move handle + shared group-transform core, move-tool polish Add a group-move gizmo alongside the existing group-rotate handle, both driven by a new shared `group-transform-shared` module (participant classification, group-box + corner math, connected wall/fence component expansion so attached structure transforms rigidly as one piece). - core: refactor alignment-anchors collection + tests, extend handle registry - editor: group-move-handle, group-transform-shared; rotate handle reuses them; node-arrow-handles gains click-swallow guard; box-select + placement tweaks - nodes: move-tool updates across ceiling/column/slab/roof/registry; door math and panel adjustments; item definition cleanup - nodes(fence): play `sfx:grid-snap` ticker on endpoint move, matching the wall endpoint tool (fixes missing audio feedback on fence side drag) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(editor): keep autosave alive across page unload The autosave debounces writes by 1s and relies on a `beforeunload` flush for anything still pending. That flush fired a plain `fetch` PUT, which the browser cancels the instant the page unloads — so refreshing right after an edit (e.g. painting a roof material) silently dropped the change and the reload showed the last persisted scene. Thread a `{ keepalive }` option through the save callback and set it on the unload flush so the request survives the unload. Also listen for `pagehide` (fires where `beforeunload` does not, e.g. mobile Safari / bfcache) and clear the dirty flag up front so the two listeners don't double-send. Normal debounced saves omit `keepalive` (its 64KB body cap only constrains the best-effort unload flush, not regular saves). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(editor): paint eraser + reset-all, drop roof cross-role bleed Material paint gains an eraser (clear a surface back to its default) and a "Reset all" action that defaults every painted surface on a node — for a roof that includes each child segment — via a generic `buildResetSurfaceMaterialUpdates` that nulls catch-all and role-specific material fields without per-kind knowledge. Also stop a single painted roof surface from bleeding onto the others: `getEffectiveRoofSurfaceMaterial`, `getRoofMaterialArray`, and the segment renderer no longer cross-fall-back between top/edge/wall. An unset role resolves only to the legacy catch-all (back-compat) or the theme default, so painting just the shingle, trim, or soffit stays on that surface. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(editor): alignment guides + drag bounding box across tools Extend the Figma-style 3D alignment guides to the placement and move tools for columns, elevators, roofs, stairs, ceilings, slabs, fences, walls, doors, and windows: each collects alignment anchors from the scene, resolves a snap within the shared threshold, and drives the `useAlignmentGuides` overlay. Wall openings (doors/windows) only snap along their host wall via the new `wall-opening-alignment` helper. Add a shared `DragBoundingBox` overlay (exported from the editor barrel) that renders the dragged object's bounds during a move, wired into the column move tool alongside the alignment snap. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(editor): axis-stable resize-arrow drag plane + slimmer gizmo handles Build the linear resize-arrow's drag plane so it always contains the handle's axis (view direction minus its along-axis component) instead of a plane that merely faces the camera. The old camera-facing normal collapsed when the axis pointed toward the viewer — screen motion barely changed the axis component, so the resize crawled or stopped tracking the cursor. Also slim the extruded arrow/handle geometry (shared by the node arrows, wall side handles, and polygon editor) for a lighter gizmo. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(editor): fill-block wall opening highlight + selected frameless openings Draw the selected-wall opening highlight as a translucent block filling the cutout volume (front-side culled) instead of a single vertical pane, so it reads as an occupied slot from any angle — including a top-down floorplan view where an edge-on pane was invisible. Also highlight a directly-selected frameless opening (a `door` with openingKind `'opening'`), which otherwise renders no geometry of its own, and reflect live drag overrides via `useLiveNodeOverrides`. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(viewer): double-side slab hole side-walls Build the slab in 3D rather than via ExtrudeGeometry so each hole-wall quad is emitted twice with opposite winding. The slab material is forced to FrontSide (DoubleSide poisons the MRT scene pass), under which ExtrudeGeometry's single-sided hole walls get back-face culled and you see straight through the cut. The doubled quads keep the cut's inner thickness visible from any angle without z-fighting. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(editor): box-select building-scoped nodes like elevators Building-scoped selectable nodes (e.g. elevators) are children of the building, not the active level, so the level walk never reached them. Also walk the level's building children and box-test any registry- selectable kind by its rendered bounds, matching the column/stair/shelf path. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(editor): shelf placement alignment + column placement ghost Shelf placement now snaps to Figma-style alignment guides by its footprint edges (layered on grid snap, Alt bypasses), matching the existing 3D move tool. Guides refresh after each drop and clear on teardown. Column placement migrates to the registry `def.tool` path so it can render a translucent column ghost at the cursor (like the shelf build tool) instead of a bare cursor sphere — the editor package can't import the column geometry, so the tool now lives in packages/nodes: - extract `ColumnBody` from the renderer and add a `ColumnPreview` (cloned translucent material, raycast disabled, origin-positioned) - new `column/tool.tsx` registry placement tool with the same footprint-edge alignment as shelf / column move - wire `def.tool` + tool hints; drop the now-unreachable legacy editor-side `ColumnTool` and its dead file Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(editor): floor-plan alignment, pivot moves & placement ghosts Bring the 3D editor's Figma-style alignment experience to the 2D floor plan across every node kind, fix pivot semantics on move, and add 2D placement ghosts. Alignment - Wall anchors now include ±thickness/2 face corners so columns/items/etc. snap flush to wall faces (fixes pillar↔wall); shared by 2D and 3D. - Shared apply-alignment helper (applyFloorplanAlignment / alignFloorplanDraftPoint, with excludeIds) used by move sessions, structural drafting (wall/fence/slab/zone/ceiling/roof), and wall/fence endpoint drags. - Door/window/wall-item moves get along-wall edge-to-edge snapping. - Generic free-translate move path aligns by edges (corner anchors). Pivot moves (2D) - Polygon kinds (slab/ceiling/zone) move by centroid→cursor via a shared polygon-centroid mover; stair moves by origin→cursor; matching 3D. - Shelf/column move targets write position directly (single source of truth) so the 3D group no longer sticks on commit. Placement ghosts (2D) - usePlacementPreview store + FloorplanPlacementPreviewLayer render a kind's def.floorplan footprint following the cursor; wired for column and elevator. Fixes - Elevator placement no longer deselects the active floor plan (preserve levelId through setSelection's hierarchy guard). - Guides clear on every commit/cancel/unmount path. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * refactor(editor): address architecture review for floor-plan work - Move usePlacementPreview store from core to editor: placement ghosts are an editor/tool concern the read-only viewer never needs. Rewire the column tool (via the @pascal-app/editor public surface) and the editor-internal elevator tool + preview layer (relative imports). - FloorplanPlacementPreviewLayer: read scene lazily in ctx.resolve instead of bulk-reading the nodes map during render. - wiki/architecture/tools.md: refresh the stale useLiveTransforms-per-kind note to reflect item/shelf/column (world-plan) + slab/ceiling/zone (delta). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(nodes): recreate window draft on wall:move when null after placement After a successful click-to-place, the click handler deletes the transient draft and relies on the wall-rebuild → R3F pointer-enter cascade to create a fresh draft for the next placement. If that cascade doesn't fire synchronously (e.g. async geometry rebuild) the next wall:move receives a null draftRef and bails — requiring leave/re-enter to place again. Fix: in onWallMove, when draftRef.current is null but we're hovering a valid wall, recreate the draft immediately (same WindowNode.parse + createNode path as onWallEnter). This is idempotent: if wall:enter does fire first, destroyDraft() in onWallEnter cleans up cleanly. Preserves parity with door multi-place behaviour, matching #367's intent. * fix(nodes): recreate door draft on wall:move when null after placement Mirror of the window fix one commit back: after click-to-place the DoorTool deletes its transient draft and relies on the wall-rebuild \u2192 R3F pointer-enter cascade to spawn a fresh draft for the next placement. When that cascade doesn't fire synchronously, the next wall:move sees a null draftRef and bails \u2014 forcing a leave/re-enter to place again. Recreate the draft in onWallMove when null and over a valid wall on the current level. Idempotent with onWallEnter (destroyDraft cleans up if both fire). --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: Pascal <open@pascal.app> |
||
|
Wassim SAMADandClaude Opus 4.7
|
11015ea1ed |
wiki: document parametric-node + move-tool pitfalls
Captures the gotchas surfaced while building the shelf so the next
contributor adding a registry-driven kind doesn't rediscover them.
`node-definitions.md` — new Pitfalls section + a rule that builders
must emit local-space children. Covers:
- `<GeometrySystem>` must NOT mutate `group.position` / `group.rotation`
after rebuild (the renderer binds them via JSX prop).
- Tag geometry-built children with `userData.__fromGeometry` so
rebuilds don't dispose React-mounted hosted children (the
item-disappears-on-shelf bug).
- Previews must clone materials before mutating them when the kind's
builder caches at module scope.
- Host kinds need a `children: z.array(...).default([])` field on their
schema (and a migration patch for older scenes).
`tools.md` — three new move/placement pitfalls:
- Disable raycast on the moved mesh during drag, otherwise it captures
the ray and starves `grid:move` → commits land at the stale start.
- Commit handlers listen to `grid:click` AND every `${kind}:click` to
catch clicks that land on neighbouring 3D geometry first.
- Move tools must preserve the node's actual `rotation[1]` in
`useLiveTransforms` — hardcoding 0 makes the node un-rotate mid-drag.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
Wassim SAMADandClaude Opus 4.7
|
c3e255b58a |
wiki(tools): clarify useLiveTransforms.position semantics for polygon kinds
Two regressions in the Stage D port surfaced the same gap: the wiki already said "the mesh offset must mirror the useLiveTransforms entry" but didn't spell out that for polygon-based kinds (slab / fence / ceiling / wall), the value to mirror is the DELTA (the group's local position) — not the world location of the polygon's center. Expanded the live-drag rule with a position-based vs polygon-based split and an explicit note that ParametricNodeRenderer reconciles the group's position via React on every Zustand notification, so the two writes must agree to the exact value or they fight every frame. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
Wassim SAMADandClaude Opus 4.7
|
cf07fcaa97 |
Restructure agent config: unified .agents/skills + wiki/architecture
Replace per-tool rule trees (.cursor/rules, .claude/rules, .codex/rules) with a single wiki/architecture/ source — 11 pages + README — readable as plain markdown by any agent. Canonical skills live in .agents/skills/; .claude/skills, .cursor/skills, .codex/skills are directory symlinks. AGENTS.md is the entrypoint (rewritten as a lean overview, no per-tool path lists). CLAUDE.md, GEMINI.md, and .github/copilot-instructions.md all point to it. Add open-pr skill (uses .github/pull_request_template.md as the source of truth for the PR body) and remove the dangling .claude/CLAUDE.md relative symlink. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |